Honeywell ProWatch PW6K1R2 PW-6000 Series Dual Reader Module, US $240 – Picture 0

Honeywell ProWatch PW6K1R2 PW-6000 Series Dual Reader Module, US $240 – Picture 1

Honeywell ProWatch PW6K1R2 PW-6000 Series Dual Reader Module, US $240 – Picture 2

Honeywell Prowatch Pw6k1r2 Pw-6000 Series Dual Reader Module

US $240

Huntsville, Alabama, United States
Feb 15th

Open on mobile:
QR code

Honeywell PW6K1R2 PW-6000 Series Dual Reader Module NEW Item Description: The PW-6000 Two-Reader Module provides support for up to two access control doors by providing connections for Wiegand or Clock/Data type readers, supervised inputs, and relay outputs. You can either mount the board in a rack or open and flat. If you rack-mount the board, only one edge is accessible for wiring; however, a flat mount increases the amount of available I/O slightly but significantly decreases the number of boards that can be mounted in one enclosure. The I/O terminals are organized to support two doors. Starting at the bottom of the rack-mount side of the board, the first connector provides power to the board. The next connector provides communication with the Intelligent Controller (PW6K1IC or PW5K1IC). The next set of terminals connects reader 1. The next set of terminals connects the I/O typically associated with reader 1, namely the Door Status and REX status inputs and the Door Lock and Lock Status relay outputs. Continuing up this edge the next two connectors provide the reader and associated I/O terminals for reader 0. The last connector on the rack-mount edge provides terminals for two additional general-purpose alarm inputs. When the board is mounted flat, two additional relay outputs and two additional general-purpose alarm inputs are available along with two dedicated alarm inputs for cabinet tamper and power fault detection on the opposite edge of the board.The reader interface accepts a Wiegand signal of Data 1 and Data 0 or a Clock and Data signal and provides 5VDC or 12VDC reader power, a tri-stated LED control and buzzer control. Two of the six form-C relay outputs are sized for the inductive load of door locks and the other four are designed to handle dry-circuit signals. All of the inputs are capable of four-state supervision except the two dedicated inputs. Communication to the control panel is accomplished via an RS-485 interface. This board requires 12VDC input power. When communication to the control panel is lost, this board can grant access based on facility code only. General purpose outputs will retain the setting at the time communication was lost. Up to eight facility codes may be active in each PW6K1R2 or PW5K1R2. Keypad input must follow the reader input format and is in place of or multiplexed with the reader data. New In Box

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Honeywell
Type	Dual Reader Module
Model	PW6K1R2