Horiba CLA-510SS NO Analyzer, US $1100 – Picture 0

Horiba CLA-510SS NO Analyzer, US $1100 – Picture 1

Horiba CLA-510SS NO Analyzer, US $1100 – Picture 2

Horiba CLA-510SS NO Analyzer, US $1100 – Picture 3

Horiba CLA-510SS NO Analyzer, US $1100 – Picture 4

Horiba CLA-510SS NO Analyzer, US $1100 – Picture 5

Horiba CLA-510SS NO Analyzer, US $1100 – Picture 6

Horiba CLA-510SS NO Analyzer, US $1100 – Picture 7

Horiba CLA-510SS NO Analyzer, US $1100 – Picture 8

Horiba Cla-510ss No Analyzer

US $1100

Reno, Nevada, United States
Mar 7th

Open on mobile:
QR code

Specifications: Model: CLA: 510SS Measuring Principle: Chemiluminescence Measuring Range: 0-20/5000 ppm in 7 ranges Repeatability: +/- 0.5% F.S. Zero Drift: +/- 1.0% F.S./day Span Drift: +/- 1.0% F.S./day Response Time: 30 seconds for 90% F.S. from rise start. Display: LED display (valid 4 digits) Sample flow rate: 500 cc/min. Ambient Temperature: 0-40 degrees C. Isolated Outputs: 0-16 mA ; 4-20 mA 0-1VDC 0-10VDC Power: 100, 115, 220, 240 VAC (as specified with order) 50/60 Hz 400VA Weight: Approximately 20 Kg. 44 lbs. Description: This is a nice Horiba CLA-510SS NO Chemiluminescent Analyzer. The unit is in excellent working condition. An instruction manual and power cord are included. Guaranteed to be fully operational. The 510 series of general-purpose gas analyzers provide continuous monitoring of concentrations of the specific sample gas. The analyzers can be operated from controls on the front panel or by commands from a remote computer. Measurement results are displayed on the front panel and are available to remote data logging systems through an industry-standard interface. The 510 series can be used for a wide variety of analyses and tests, such as industrial process control and composition analysis, and fixed-source emissions monitoring. Each model is configured using one of four analyzers: the VIA-510 infrared analyzer, the CLA-510 Chemi-NOX analyzer, and the MPA-510 O2 analyzer. A high level of sensitivity is achieved through the use of a dual-beam NDIR, Chemiluminescence, and Magneto-pneumatic analysis methods. The NDIR analyzers use an infrared absorption method which offers superior sensitivity, selectivity, and stability. With the Magnetopneumatic oxygen analyzer, high-sensitivity measurements can be realized free of zero drift due to the use of N2 as the reference gas. The Chemiluminescence analyzers use a dryer unit equipped with automatic regeneration, so ambient air can be used as the source of O3. It also provides 7 ranges and a range of 1:100 (0-20/50/100/1000/2000ppm), making it easy to handle a wide variety of applications. These highly accurate, high performance analyzers are suitable for process monitoring and control. Features: Selectable outputs: 0-1 VDC, 0-10 VDC, and 4-20 mA Digital outputs: range setting information. Digital alarms: indicate malfunctions or calibration failure. Digital inputs: Zero cal, Span cal, Data hold. Range inputs: 4 inputs BCD code. Measuring method Chemiluminescence Repeatability ±0.5% F.S. (±1.0% F.S. for high-sensitivity range) Drift ±1.0% F.S. per day (±2.0% F.S. per day for high-sensitivity range) Response time 10 sec. (electrical) Reference gas Not needed Calibration gas Zero: N2 or Air, Span: Span gas Mass. 20kg, 44 lb

“In good condition. Ozone generator and NOx converter listed separately. Some scratches and dents on top.”

Brand	Horiba
Country/Region of Manufacture	Japan
Model	CLA-510SS