US $239.00
| Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Setting Position | Tilting |
| MPN | Does Not Apply | ||
| Operation | Manual | ||
| Brand | Unbranded | ||
| UPC | Does not apply |
Directions
Similar products from Rotating Tables
BRASS SECTOR ARMS for DIVIDING HEAD mill milling indexer rotary table
INDEXING PLATE DIVIDING HEAD 4.875 O.D. 1-1/8 I.D x .31 Holes 37,39,41,43,47,49
ROTARY TABLE 4"/100MM WITH 65MM MINI SCROLL LATHE CHUCK & BACKPLATE
ROTARY TABLE 4"/100MM WITH 70MM INDEPENDENT CHUCK & BACKPLATE
ROTARY TABLE 4"/100mm WITH 80mm 3 JAW SELF CENTERING CHUCK & BACKPLATE
TILTING ROTARY TABLE 3"/80MM WITH 50MM MINI LATHE CHUCK & BACKPLATE
TILTING ROTARY TABLE 3"/80MM WITH 65MM MINI SCROLL LATHE CHUCK & BACKPLATE
TILTING ROTARY TABLE 3"/80mm WITH 80 MM 3 JAW SELF CENTERING CHUCK & BACKPLATE
TILTING ROTARY TABLE 4"/100mm WITH 65mm MINI SCROLL CHUCK
Tilting Rotary Table 4/100mm with 80 MM 3 JAW SELF Centering Chuck Backplate
Horizontal Vertical HV6 Rotary Table 6" / 150MM 4 Slot For Milling Machine
4" Inch Precision Tilting Rotary Table HV 4 Slot (100mm ) With Vise Round Vice
Rotary Table Lathe Tail Stock Tailstock
65MM 3 JAW MINI SCROLL CHUCK WITH MT2 MOUNTING SHANK 3/8 DRAWBAR THREADED 14 x 1
Brand New Single Knurl Straight Linear Knurling Tool Holder 3/4"-3/4"-5"
HAAS HRT-7 4TH AXIS ROTARY TABLE with Angle Mount Bracket, 14-Pin Cable; USA
2-1/2" /65mm 3-Jaw Mini Lathe Chuck With MT1 & MT2 arbors Bluefox
VINTAGE L-W CHUCK SMALL INDEX HEAD WITH 1 1/2-8 SPINDLE MACHINIST JIG FIXTURE
Live Revolving Tailstock with 4 Jaw Self Centering Lathe Chuck 65mm MT3 Shank
People who viewed this item also vieved
1-2-3 TIN COATED BLOCK SET (3402-0905)
BULL NOSE LIVE CENTER 4MT SHANK
LOT OF 4 RIDGID 69070 D500X CHUCK JAWS & Levers 802 pipe threader/ threading
Buck chuck 5 inch 3 jaw self centering
Bison chuck 3 jaw / 6 1/4 / southbend 1 1/2 mount
2X 30Kg Vertical Toggle Clamp Quick Release Hand Tool Holding Capacity GH-13009
DE-STA-CO 385-R Pull Action Latch Clamp w/ 385102 Latch Plate -7500lb Capacity
MACHINIST LATHE MILL 2 NICE Small Welding Machinist Clamps SAV
NEW 5C COLLET BLOCK SET- SQUARE, HEX, RINGS & COLLET CLOSER HOLDER
COMMAND C4C4-1000 CAT 40 COLLET HOLDER 14316-191
COMMAND C4C4-1000 CAT 40 COLLET HOLDER 14316-015
JFK 5C LEVER COLLET CLOSER WITH DRAW BAR FOR LATHE SPINDLE
7" LATHE FACE PLATE HARDINGE TAPER MOUNT FEELER
Parallels, (2) Sets of Machinist Parallels, .745 & .920" High, Made by Toolmaker
Vacuum Chuck Dunham 6"x12" W/ Vacuum Pump & Motor Works Great !!!
Atlas # 9-101-32A Change Gear - 32 Tooth / OO 188
Atlas # 9-101-32A Change Gear - 32 Tooth / OO 187
Vlier, Spring Stop, SS92B, 2" x 2", new
3" Machinist Precision Toolmakers Vise
KURT REVERSE CNC 6" VISE 3610 / 3600V
LittlestownVise 4" Jaw Width x 3 5/8" Opening Bench Mount Vise Classic Red *USA*
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies