+ Post new Ad
HORKINS # 8 LATHE COLLET WATCHMAKERS TOOLS CLOCK REPAIR, US $4.87 – Picture 0
HORKINS # 8 LATHE COLLET WATCHMAKERS TOOLS CLOCK REPAIR, US $4.87 – Picture 0

Horkins # 8 Lathe Collet Watchmakers Tools Clock Repair

US $4.87

  • Sugarcreek, Ohio, United States
  • Aug 7th
Open on mobile:
QR code
Increase your productivity with the HORKINS #8 Lathe Collet. This high-quality collet has the potential to drastically improve the efficiency and precision of your work. Thank you for considering this valuable addition to your toolkit and may you be blessed. HORKINS has recently released a new lathe collet marked #8, a must-have for watchmakers and clock repair workers. Measuring approximately 13 mm across the top and with a thread of around 7mm, this collet is roughly 1 3/8 inches long.
“GOOD USED CONDITION,,THESE MAY HAVE BEEN USED WITH NORMAL SIGNS OF WEAR SPOTS ETC.,,,WE DID NOT CLEAN THESE,,THESE LOOK TO BE IN GOOD USABLE CONDITION,,,,CHECK PHOTOS YOU GRADE,,,”
Modified Item No
Tool Type COLLET
Country/Region of Manufacture Unknown
MPN Does Not Apply
Custom Bundle No
Brand HORKINS

Directions

Similar products from Other Workholding Tools

80PCS 6-14mm Spring Clips Hose Clamps For Holding Tight On Fuel,Vauum,Water Hose

80PCS 6-14mm Spring Clips Hose Clamps For Holding Tight On Fuel,Vauum,Water Hose

  • suzhou, China
  • Aug 8th
Lot of 4 De-Sta-Co Toggle Clamps No.210

Lot of 4 De-Sta-Co Toggle Clamps No.210

  • Cape Neddick, Maine, United States
  • Aug 8th
Vacuum Table VT-W1 8" x 12"

Vacuum Table VT-W1 8" x 12"

  • Nashville, Tennessee, United States
  • Aug 7th
W12 13mm Arbor, Schaublin 70, Aciera F1, Sixis 101, Habegger JH70

W12 13mm Arbor, Schaublin 70, Aciera F1, Sixis 101, Habegger JH70

  • O'Fallon, Missouri, United States
  • Aug 7th
Schaublin W12, 10mm Arbor, Schaublin 70, Aciera F1, Sixis 101, Habegger JH70

Schaublin W12, 10mm Arbor, Schaublin 70, Aciera F1, Sixis 101, Habegger JH70

  • O'Fallon, Missouri, United States
  • Aug 7th
DUNHAM CC2030 2" OD 3" Long EXPANDING COLLET

DUNHAM CC2030 2" OD 3" Long EXPANDING COLLET

  • Mukwonago, Wisconsin, United States
  • Aug 7th
NEW Starrett 762XFL Electronic Micrometer Head

NEW Starrett 762XFL Electronic Micrometer Head

  • Athol, Massachusetts, United States
  • Aug 7th
12 T-Slot Bolts Studs 5/8" 11 - Zip - Armstrong - TE-CO - Unbranded 2" - 6" USED

12 T-Slot Bolts Studs 5/8" 11 - Zip - Armstrong - TE-CO - Unbranded 2" - 6" USED

  • Clarkston, Michigan, United States
  • Aug 7th
NOS Carboloy Insert SSN 532 5 Pieces

NOS Carboloy Insert SSN 532 5 Pieces

  • Lockport, New York, United States
  • Aug 7th
2 T-Slot Bolts - 8 Studs - 8 T-Slot Nuts 5/8" 11 - 6" - 8" Length USED No Name

2 T-Slot Bolts - 8 Studs - 8 T-Slot Nuts 5/8" 11 - 6" - 8" Length USED No Name

  • Clarkston, Michigan, United States
  • Aug 7th
MIMATIC 176866 TOOL HOLDER

MIMATIC 176866 TOOL HOLDER

  • Amman, Jordan
  • Aug 7th
Taft Pierce Universal Right Angle Iron 8 in. tall x 5" x 4 1/2" With Crate

Taft Pierce Universal Right Angle Iron 8 in. tall x 5" x 4 1/2" With Crate

  • Wichita, Kansas, United States
  • Aug 6th
Bison 6" 3-Jaw SET-TRU Scorll Forged Steel Lathe Chuck-.0004" TIR, w/Fine Adj.

Bison 6" 3-Jaw SET-TRU Scorll Forged Steel Lathe Chuck-.0004" TIR, w/Fine Adj.

  • Hamden, Connecticut, United States
  • Aug 6th
Wilton 86520 4800S-24C, 24" Heavy Duty F-Clamp Copper

Wilton 86520 4800S-24C, 24" Heavy Duty F-Clamp Copper

  • Mesa, Arizona, United States
  • Aug 6th
Z COLLETS TREE MILL 6PCS P/N 55132 6 COLLETS FOR KWIK SWITCH 200 300 LOT n

Z COLLETS TREE MILL 6PCS P/N 55132 6 COLLETS FOR KWIK SWITCH 200 300 LOT n

  • North Port, Florida, United States
  • Aug 6th
NOS P-1200 Knu-Vise Clamp, 13 3/8" overall, welding/ aviation vise

NOS P-1200 Knu-Vise Clamp, 13 3/8" overall, welding/ aviation vise

  • Arlington, Tennessee, United States
  • Aug 6th
Savannah Heavy Duty-dual Bearing Live Center

Savannah Heavy Duty-dual Bearing Live Center

  • Sumter, South Carolina, United States
  • Aug 6th
Black Air vacuum hose 6mm 1/4 1 meter Id full silicone For gasoline Diesel

Black Air vacuum hose 6mm 1/4 1 meter Id full silicone For gasoline Diesel

  • suzhou, China
  • Aug 6th
LOT OF 3 SECO-EPB GRAFLEX INDEX BORING HEAD 50-65MM 85-115MM CAT50 567

LOT OF 3 SECO-EPB GRAFLEX INDEX BORING HEAD 50-65MM 85-115MM CAT50 567

  • Houston, Texas, United States
  • Aug 6th
PanaVise Wide Opening Head Model 366 With Box

PanaVise Wide Opening Head Model 366 With Box

  • Saint Petersburg, Florida, United States
  • Aug 6th

People who viewed this item also vieved

2 SMALL MEASURING BLOCKS, 2 SMALL ANGLE BLOCKS AND 2 SMALL SCRIBES

2 SMALL MEASURING BLOCKS, 2 SMALL ANGLE BLOCKS AND 2 SMALL SCRIBES

  • Epping, New Hampshire, United States
  • Jan 30th
Misc. Lot of Machinist Toolmaker Blocks Parallel Work Holding angle block

Misc. Lot of Machinist Toolmaker Blocks Parallel Work Holding angle block

  • Reynoldsburg, Ohio, United States
  • Jan 30th
STARRETT V-BLOCK No.568 & CLAMP, MACHINIST TOOLS CLEAN VGC

STARRETT V-BLOCK No.568 & CLAMP, MACHINIST TOOLS CLEAN VGC

  • Malden, Massachusetts, United States
  • Jan 30th
ARROW TOOL - #5 M/T - 60 DEG. B&S 12 DEAD CENTER - 7 1/2" AOL.

ARROW TOOL - #5 M/T - 60 DEG. B&S 12 DEAD CENTER - 7 1/2" AOL.

  • McKee, Kentucky, United States
  • Jan 30th
2-PCS -TEXTRON - CNC #5 DEAD CENTERS

2-PCS -TEXTRON - CNC #5 DEAD CENTERS

  • McKee, Kentucky, United States
  • Jan 30th
2-PCS- LATHE DEAD CENTER- #5 M/T , 7" OAL. USED

2-PCS- LATHE DEAD CENTER- #5 M/T , 7" OAL. USED

  • McKee, Kentucky, United States
  • Jan 30th
HO-8300F Lathe Chuck Steel Soft Jaws set of 3

HO-8300F Lathe Chuck Steel Soft Jaws set of 3

  • Fullerton, California, United States
  • Jan 30th
CUSHMAN 12" THRU HOLE POWER CHUCK 10-590-12-A08C

CUSHMAN 12" THRU HOLE POWER CHUCK 10-590-12-A08C

  • Jackson, Michigan, United States
  • Jan 30th
LATHE CHUCK JAWS FOUR 4

LATHE CHUCK JAWS FOUR 4

  • Utica, Kentucky, United States
  • Jan 30th
2 "C" Clamps J F Williams & co & Gedney

2 "C" Clamps J F Williams & co & Gedney

  • Grahamsville, New York, United States
  • Jan 30th
Yardley Products Threaded Metal Inserts 2 box combo

Yardley Products Threaded Metal Inserts 2 box combo

  • Willshire, Ohio, United States
  • Jan 30th
5 inch C-Clamp Adjustable 1450-5 5 " Orange Pony C Clamp

5 inch C-Clamp Adjustable 1450-5 5 " Orange Pony C Clamp

  • Campton, Kentucky, United States
  • Jan 30th
Armor Collet Chuck 1-1/2" 8 TPI Spindle South Bend Atlas Logan Sheldon

Armor Collet Chuck 1-1/2" 8 TPI Spindle South Bend Atlas Logan Sheldon

  • Ottawa, Illinois, United States
  • Jan 30th
3 Hardinge Collets 3” 16C EDC

3 Hardinge Collets 3” 16C EDC

  • San Antonio, Texas, United States
  • Jan 30th
Lot of 6 Harding Collets 16C 2” EDC EN1-1 E .178

Lot of 6 Harding Collets 16C 2” EDC EN1-1 E .178

  • San Antonio, Texas, United States
  • Jan 30th
Whitcomb 6.5mm Lathe Step Collets Adaptors Female Centers Brass Wax Chuck Reamer

Whitcomb 6.5mm Lathe Step Collets Adaptors Female Centers Brass Wax Chuck Reamer

  • Royal Oak, Michigan, United States
  • Jan 30th
YUASA 550-004 Type 5C Collet Indexer Assembly TREE KIRA CNC DRILLING TAPPING

YUASA 550-004 Type 5C Collet Indexer Assembly TREE KIRA CNC DRILLING TAPPING

  • San Diego, California, United States
  • Jan 30th
WASINO Type 5C Collet Closer Assembly for LG-6 CNC Lathe

WASINO Type 5C Collet Closer Assembly for LG-6 CNC Lathe

  • San Diego, California, United States
  • Jan 30th
DAVENPORT P/N #5134-1 GENEVA MOTION STAR WHEEL

DAVENPORT P/N #5134-1 GENEVA MOTION STAR WHEEL

  • Churchville, New York, United States
  • Jan 30th
5" Sine Plate with rail an 7 standards

5" Sine Plate with rail an 7 standards

  • Bronson, Florida, United States
  • Jan 30th
BOKUM Tool Sharpening Fixture

BOKUM Tool Sharpening Fixture

  • Oregon, Ohio, United States
  • Jan 30th
Tsudakoma RNCM-301R CNC Rotary Table

Tsudakoma RNCM-301R CNC Rotary Table

  • Wyoming, Michigan, United States
  • Jan 30th
Haas Trunnion Table

Haas Trunnion Table

  • Tampa, Florida, United States
  • Jan 30th
Haas Rotary Table

Haas Rotary Table

  • Tampa, Florida, United States
  • Jan 30th
Misc. Machinists fixtures angle blocks machinist mill lathe accessories grinding

Misc. Machinists fixtures angle blocks machinist mill lathe accessories grinding

  • Reynoldsburg, Ohio, United States
  • Jan 30th
Kurt 8" Angle Lock Precision Machine Vise

Kurt 8" Angle Lock Precision Machine Vise

  • Lawndale, California, United States
  • Jan 30th
Original VERSA-VISE Workshop Tool

Original VERSA-VISE Workshop Tool

  • Canal Fulton, Ohio, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies