Hose Tube Pipe For A Full-face Mask Nato 40mm/fetish

US $60.00

Moscow, Russian Federation
Jul 22nd

Open on mobile:
QR code

Hose tube pipe for a full-face mask NATO 40mm/FETISH Hose tube pipe for a full-face mask NATO 40mm designed in the studio D&D based on standard hoses tubes of the USSR. 3D printing was used in the production of adapters. ATTENTION! THE ADAPTERS ARE PRINTED ON A 3D PRINTER, THIS IS NOT A FACTORY PRODUCT. THE LEAK TEST WAS CARRIED OUT IN THE D&D LABORATORY ACCORDING TO THE STANDARD PROCEDURE. FOR THE TIGHTNESS OF THE PRODUCT, GASKETS, (SPECIAL CHEMICAL GLUE, CLAMPS) ARE USED!!! BRAND: D&D. MADE IN RUSSIA. 1. Hose tube pipe is designed for connecting breathing bags of different volumes. 2. The adapter tee has an inner diameter of 22 mm, an outer diameter of 26 mm. 3. After connecting the breathing bag, it is necessary to use a clamp to ensure tightness. This corrugator can be used with all gas masks that have 40 mm threads on the right and left (S10 (FM-12) FM53, FM54, C-50, SCOTT FRR, SGE-150, SGE-400, PMK-4, PMK-5, PMK-C, PMK-3, PMK-2, GP-21) and other models of full-face masks and gas masks. The rotating angle adapters have a universal 40 mm thread, which allows you to use the hose both from the front and from the back, this is its main advantage. Does not include rebreathing bag or full face mask SHIPPING BY REGISTERED MAIL 20.00 USD WORLDWIDE

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	MPN	Does Not Apply
Brand	D&D
Country/Region of Manufacture	Russian Federation