Hot Air Smd Rework Station Yihua 853d+ (stazione Saldante) With Power Supply 3a

US $204.00

Praha, Prague, Czech Republic
Jan 31st

Open on mobile:
QR code

Hot Air SMD rework Station YIHUA 853D+ (Stazione Saldante) with power supply 3A Technical data: Rated voltage:AC 220V±10% 50Hz Total Power:720W+75W+15W=810W±10%(max) Work environment:0-50°C Soldering iron: Work Voltage:AC:26V±10% 50Hz Output power:75W±10% Temperature range:200°C-480°C Temperature stability:±2°C Tip of ground impedance:<2ohm Tip of ground voltage:<2mV Heater:Hakko heater Color:Blue handle Air gun: Work Voltage: AC:220V±10% 50HZ Output power:720W±10% Temperature range:100°C-480°C Temperature stability:±2°C DC power supply: Work Voltage:AC 20V±10% 50HZ Output power:15W/30W/45W Output voltage:0-15V Load stability:<0.01±2mv Recovery time:<100us Ripple dB:<1mvrms (virtual value) Temperature coefficient:<300PPm/°C Protection starting current:>standard value 10% Remark: Specifications and design subject to change without notice Feature: 1.it has hot air rework,soldering station, power supply 3 in 1 multifunctional tools,A product can meet customer testing,maintenance, welding and other demolition work.And every part of the configuration and quality are much higher than the market independent of soldering station, hot air rework, power supply. 2.Products within the exclusive use of double panels, patch (SMD) process, dual CPU control, one of the bad, the other can continue to work, its stability and life is much higher than similar products on the market. 3. LED accurate display real time temperature of the current work,procedures in milliseconds to high speed track of the air gun and soldering iron actual temperature, rapid temperature compensation enhance the temperature stability.Avoid temperature error leading to damage delicate components, welcome to users thermometer test. 4.Air gun heater using long-life ceramic skeleton heater,long-term use it,will good shape and not short-circuit,air gun handle air outlet tube and nozzles’s material is stainless steel,rapid temperature compensation enhance the temperature stability.Avoid temperature error leading to damage delicate components,welcome to users thermometer test. 5. Standard life of 30,000 hours of high quality brushless fan, handle cable using high temperature resistant silicone lines 6. Iron heater using High power import heating elements,In addition to adapt to the general welding, but also particularly suitable for high strength, high temperature, large spot welding. 7.Power supply part:15V 3A,its scope is far higher than the independent power supply, the most advanced short circuit protection auto recovery circuit, to full maintenance functions suitable for mobile phone maintenance, commissioning of production lines, laboratories and other occasions. Main function: 1). 3 in 1 SMD Soldering Rework Station with power supply YIHUA 853D+ tegrate all merits of 853D series,it uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow. 2). The Soldering station, Hot air rework's temperature are using Intelligent Fuzzy logic PID control, therefore the temperature steady-state drift is relatively small, it overcomes the drift quite quickly even in a harsh environment. 3). Fan's airflow capacity, Soldering Iron and Hot air rework's temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated. 4). Power supply part of the recovery with continuous protection and RF protection, to avoid various unexpected burning mobile the phenomenon of interference. 5). The DC power supply provides power to a mobile phone, it can also detect the RF signal's strength through the LED indicator. 6). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures. 7). Hot air rework, soldering iron are equipped by variety of fault protection. Applications 1.Industrial production of electronic products assembly 2.Scientific research departments for product development 3.Repair industry for electronic product repair 4.Enterprises electrician soldering operation 5.Electronic technology enthusiasts electronics assembly 6.Students of various Colleges Electrical Skills Training 7.Suitable for a various kind of soldering or desoldering (removals) purposes of the electronic components such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially mobile phone's cable ). 8.Shrinking, Paint drying, adhesive removal, thawing, warming, Plastic welding. 9.Mobile phones repair: it provides power supply, circuit board voltage testing, and detects mobile radio signal's strength, etc What's in the box : * main unit + gun + power cord * guide * soldering iron * soldering iron holder +gun frame+testleadest cable * 4 nozzles * 1pcs IC pick-up

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	YIHUA
Country/Region of Manufacture	China
Model	YIHUA 853D+