+ Post new Ad
Hougen 12002 Cutters Kit, US $100.00 – Picture 0
Hougen 12002 Cutters Kit, US $100.00 – Picture 1
Hougen 12002 Cutters Kit, US $100.00 – Picture 0
Hougen 12002 Cutters Kit, US $100.00 – Picture 1

Hougen 12002 Cutters Kit

US $100.00

  • Portland, Oregon, United States
  • Jun 9th
Open on mobile:
QR code
From the Manufacturer Hougen 12002 Rotabroach Magnetic Drill Cutter Kit 12,000 Series 2-Inch D.O.C. is for use on Hougen Portable Magnetic Drills and materials up to 350 BHN. Made of hardened, high speed tool steel and precision ground, cutters feature a 3/4-inch diameter shank. Modified end tooth geometry for stacked plate drilling is available. Our exclusive and patented end-tooth geometry - the Hougen-Edge, is one of the reasons Rotabroach Cutters require less thrust and improve finish and tool life. The alternating tooth angles equalize forces to keep the cutter path straight, even thru the deepest holes. Rotabroach Cutters drill a burr-free hole by cutting around the hole and ejecting the center as a usable slug. Rotabroach Cutters require far less horsepower than twist drills of comparable size when run at the same feed rate. As a result, cutters can be run at higher feeds with higher metal removal rates while horsepower requirements are not increased. The geometry of Rotabroach Cutters is such that far less material is converted into chips than when using twist drills. Far less thrust is required by Rotabroach Cutters because they do not have a dead-center area like the chisel edge region of twist drills. Thrust required is 50 percent of smaller diameter twist drills and 10 percent or less for larger diameters. More cutting edges at work during each revolution smoothes out finishes and reduces chip loads per tooth as compared to twist drills. From three to 12 teeth per cutter, depending upon diameter, helps tools last longer, even at higher feed rates. "12,000-Series" Annular Cutters are resharpenable using the 10950 Sharpening Machine.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Hougen
Quantity 1
Model 12002

Directions

Similar products from Other Cutting Equipment & Expendables

Sumitomo Carbide Tools Cut Off Inserts I9240 TAF 60134 WCFN4A

Sumitomo Carbide Tools Cut Off Inserts I9240 TAF 60134 WCFN4A

  • Sturgis, Michigan, United States
  • Jun 9th
Sumitomo Carbide Tools Cut Off Inserts I4211 WCFN4 AC25 Quantity 10

Sumitomo Carbide Tools Cut Off Inserts I4211 WCFN4 AC25 Quantity 10

  • Sturgis, Michigan, United States
  • Jun 9th
Parting and Grooving Blade 151.2-25-50 USED

Parting and Grooving Blade 151.2-25-50 USED

  • Sturgis, Michigan, United States
  • Jun 9th
Sanwa Sheet Metal Shearing Cutting Nibbler Hi-Nibbler 320 .125 Capacity

Sanwa Sheet Metal Shearing Cutting Nibbler Hi-Nibbler 320 .125 Capacity

  • Saint Clair Shores, Michigan, United States
  • Jun 9th
Thread Dies Adjustable 7/8 5/8

Thread Dies Adjustable 7/8 5/8

  • Pittsburgh, Pennsylvania, United States
  • Jun 9th
Manchester Cutter C5-MB-12428-5

Manchester Cutter C5-MB-12428-5

  • West Bend, Wisconsin, United States
  • Jun 9th
Keo Hss Woodruff Key Cutter Bit 6 Piece Set

Keo Hss Woodruff Key Cutter Bit 6 Piece Set

  • Henderson, Nevada, United States
  • Jun 9th
Vintage BLUEBIRD tin snips shears No 10 USA Forged Steel Blue Paint handle

Vintage BLUEBIRD tin snips shears No 10 USA Forged Steel Blue Paint handle

  • Saratoga Springs, New York, United States
  • Jun 9th
MACHINISTS TOOLMAKER'S HEAVY DUTY KNURL KNURLING TOOL ATTACHMENT FOR LATHE

MACHINISTS TOOLMAKER'S HEAVY DUTY KNURL KNURLING TOOL ATTACHMENT FOR LATHE

  • Golden Valley, Arizona, United States
  • Jun 9th
Sandvik Coromant Scraper 620-25 With Bit

Sandvik Coromant Scraper 620-25 With Bit

  • Temecula, California, United States
  • Jun 9th
Hougen 17801 Fabricaters Kit

Hougen 17801 Fabricaters Kit

  • Portland, Oregon, United States
  • Jun 9th
Samputensili Gear Shaper Cutter DP 24 /48

Samputensili Gear Shaper Cutter DP 24 /48

  • Lombard, Illinois, United States
  • Jun 9th
VINTAGE ARMSTRONG NO. 4 PLANER MACHINIST SCREW JACK NEVER USED NOS

VINTAGE ARMSTRONG NO. 4 PLANER MACHINIST SCREW JACK NEVER USED NOS

  • Philadelphia, Pennsylvania, United States
  • Jun 9th
DRILL BLANK SET HSS #1 TO #60 METAL INDEX CASE ( some missing ) USA

DRILL BLANK SET HSS #1 TO #60 METAL INDEX CASE ( some missing ) USA

  • South Gate, California, United States
  • Jun 9th
lot of 9 diff. involute gear cutters. National, B&S, Morse. different sizes.

lot of 9 diff. involute gear cutters. National, B&S, Morse. different sizes.

  • Chaplin, Connecticut, United States
  • Jun 9th
SANDVIK FILES METALWORKING Set 5 Files Sharpen Fishing Or Knives Hooks

SANDVIK FILES METALWORKING Set 5 Files Sharpen Fishing Or Knives Hooks

  • South Hill, Virginia, United States
  • Jun 9th
3/4” x 2” Cobalt Annular Cutter FMT Production Free Shipping

3/4” x 2” Cobalt Annular Cutter FMT Production Free Shipping

  • Freeport, Texas, United States
  • Jun 9th
LOT OF 5 HSS COUNTERSINKS 3/4" -82° TO 1-1/2" -30° KEO SEVERANCE STANDARD

LOT OF 5 HSS COUNTERSINKS 3/4" -82° TO 1-1/2" -30° KEO SEVERANCE STANDARD

  • Ellington, New York, United States
  • Jun 9th
NICE!!! NEW!!! PAIR OF HSS HEAVY DUTY COUNTERSINKS 1-1/4-82° TO 1-1/2-82° KEO

NICE!!! NEW!!! PAIR OF HSS HEAVY DUTY COUNTERSINKS 1-1/4-82° TO 1-1/2-82° KEO

  • Ellington, New York, United States
  • Jun 9th
ITT Barton 077-1014P Stainless Steel Tubing Type 304 SS .020 inch Wall

ITT Barton 077-1014P Stainless Steel Tubing Type 304 SS .020 inch Wall

  • Garland, Texas, United States
  • Jun 9th

People who viewed this item also vieved

Keyway Broach Bushing Guide, Type D, 1 13/16" x 5", Uncollared, Used

Keyway Broach Bushing Guide, Type D, 1 13/16" x 5", Uncollared, Used

  • Tazewell, Virginia, United States
  • Jan 30th
Keyway Broach Bushing Guide, Type C, 1 1/4" x 5 3/4", Uncollared, Used

Keyway Broach Bushing Guide, Type C, 1 1/4" x 5 3/4", Uncollared, Used

  • Tazewell, Virginia, United States
  • Jan 30th
SANDVIK CARBIDE INSERTS , CNMG 431-WF , 2015 , 5 INSERTS

SANDVIK CARBIDE INSERTS , CNMG 431-WF , 2015 , 5 INSERTS

  • Berlin, Connecticut, United States
  • Jan 30th
KENNAMETAL CARBIDE INSERTS , NG3189L , K68 , 9 INSERTS

KENNAMETAL CARBIDE INSERTS , NG3189L , K68 , 9 INSERTS

  • Berlin, Connecticut, United States
  • Jan 30th
5 PCS DNGA 431 A2 INTERSTATE CERAMIC INSERTS #1-2442CR-110 **NEW**

5 PCS DNGA 431 A2 INTERSTATE CERAMIC INSERTS #1-2442CR-110 **NEW**

  • Mentor, Ohio, United States
  • Jan 30th
6 PCS SNGA 433 A2 CERAMIC INSERTS #1-2442CR-131 **NEW**

6 PCS SNGA 433 A2 CERAMIC INSERTS #1-2442CR-131 **NEW**

  • Mentor, Ohio, United States
  • Jan 30th
HUGE INGERSOLL ENDMILL END MILL CARBIDE INSERTABLE LOOK

HUGE INGERSOLL ENDMILL END MILL CARBIDE INSERTABLE LOOK

  • Mountain View, California, United States
  • Jan 30th
HANITA 1-1/2" x 1-1/4 x 4" HSS 3 FLUTE ROUGHING ROUGHER END MILL ENDMILL

HANITA 1-1/2" x 1-1/4 x 4" HSS 3 FLUTE ROUGHING ROUGHER END MILL ENDMILL

  • Chino, California, United States
  • Jan 30th
STRIPPIT Nisshinbo AMADA PUNCH & DIE WILSON .200 SQ +.008 Q12

STRIPPIT Nisshinbo AMADA PUNCH & DIE WILSON .200 SQ +.008 Q12

  • Lake Worth, Florida, United States
  • Jan 30th
NEW M14x1.5 DIE HSS DIN 223 BRAND GWG /GEWINDEWERKZEUGE/

NEW M14x1.5 DIE HSS DIN 223 BRAND GWG /GEWINDEWERKZEUGE/

  • Gabrovo, Bulgaria
  • Jan 30th
.8453" HS REAMER .625" SHANK 2.5" LOC 7" OAL NST1 533 (LOC1223B) TS12

.8453" HS REAMER .625" SHANK 2.5" LOC 7" OAL NST1 533 (LOC1223B) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
.7585" CARBIDE TIPPED EXPANSION REAMER .625" SHANK 9.5" OAL (LOC1223B) TS12

.7585" CARBIDE TIPPED EXPANSION REAMER .625" SHANK 9.5" OAL (LOC1223B) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
A80x10N Staggered Tooth Side Milling Cutter 80x10x22mm Sp1250 14Teeth KHSS-E 10B

A80x10N Staggered Tooth Side Milling Cutter 80x10x22mm Sp1250 14Teeth KHSS-E 10B

  • Middlebury, Indiana, United States
  • Jan 30th
Fette 80x5x22mm Staggered Tooth Side Milling Cutters A80x5N Sp1250 HSS 14-Teeth

Fette 80x5x22mm Staggered Tooth Side Milling Cutters A80x5N Sp1250 HSS 14-Teeth

  • Middlebury, Indiana, United States
  • Jan 30th
Carboly GR-85 370 Tool Bit, Shank size 1" x 1 1/4" x 8", Carbide tip sharpened

Carboly GR-85 370 Tool Bit, Shank size 1" x 1 1/4" x 8", Carbide tip sharpened

  • Coventry, Rhode Island, United States
  • Jan 30th
Tool Holders- Cut off tool-kennametal-valentine Bits

Tool Holders- Cut off tool-kennametal-valentine Bits

  • Blanchard, Oklahoma, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies