Hp/agilent 4291a/001-1c2-1d5 Impedance Analyzer

US $12,500.00

Oreland, Pennsylvania, United States
Jan 29th

Open on mobile:
QR code

SquareTrade © AP6.0 HP/Agilent 4291A Impedance/Material Analyzer Options 001-1C2-1D5 NIST CAL/CERT 90 Day Warranty 5 Day ROR This auction is for a USED item. Please review item Description & Condition and our policies BEFORE bidding!: MANUFACTURER'S Specifications: Data sheet/specs #1 INSTALLED OPTIONS: Option 001 - DC Bias Option 1C2 - HP IB Option 1D5 - High Stability Frequency Reference HP 4291A impedance/material analyzer provides a total solution for high-accuracy and easy measurement of surface-mount components and dielectric/magnetic materials. The 4291A uses a direct current-voltage measurement technique, as opposed to the reflection measurement technique, for more accurate impedance measurement over wide impedance range. Basic impedance accuracy is ± 0.8%. High Q accuracy enables low-loss component analysis. An internal synthesizer sweeps frequency from 1 MHz to 1.8 GHz with 1 mHz resolution. A 1.8 m error-less cable connects the analyzer to a test station so you can extend your test point away from the analyzer without losing accuracy. Advanced calibration and error compensation function eliminate measurement error factors in fixtures and assure high accuracy and repeatability at DUT/MUT. The 4291A also provides automatic level control and monitor of test signals by using I-BASIC programming function; devices can be measured under a constant voltage or current. Measure bias-dependent impedance characteristics with optional dc bias (up to 40V and 100mA). At the push of a button, the built-in Equivalent Circuit Analysis Function automatically calculates the circuit constant values of five circuit models (similar to 4194A's Equivalent Circuit Analysis Function.) The 4291A has two measurement channels; each channel can be set to measure a single (e.g., Z) or dual (e.g., Z-theta) impedance parameter. The color CRT with split-display can show both active traces and memory traces (stored in RAM). A built-in floppy disk drive stores programs and test data in either LIF or MS-DOS format. With optional IBASIC (Opt 1C2), you can control external test equipment such as a temperature chamber or wafer prober directly from the 4291A. You do not need a separate instrument controller. Opt 1C2 gives you a keyboard and the HP IBASIC programming language for test automation and integration. Material Evaluation The 4291A enables easy and sophisticated material evaluation and improves material evaluation quality and efficiency. The 4291A provides the total dielectric/magnetic material measurement solutions in wide frequency range (1 MHz to 1.8 GHz). Key Features Basic accuracy ± 0.8% Advanced calibration and error compensation Four component test fixtures (DUT size: 0.5 mm to 20 mm) Independent parameter selection in 2 channels Direct read-out permittivity, permeability Two material fixtures (operating temperature: -55° to +200°C) Versatile analysis (temperature, cole-cole plot, relaxation time) Swept parameters (frequency, ac level, dc bias, temperature) ITEM DESCRIPTION & CONDITION: Unit will be Calibrated to meet manufacturer's specifications in our ON-SITE NIST lab by one of our expert certified technicians. This unit comes from a working large-scale industrial/lab environment. NOTE - For domestic sales - in the event of a warranty repair we will cover the shipping cost to return the repaired unit back to you. For International sales - we will pay shipping cost to return the repaired unit to you. INCLUDED IN THIS AUCTION: F the item used with NIST CAL/CERT, 90 day warranty and 5 day ROR minus s/h both ways (professionally packed & shipped) F product data/specs overview F line cord if applicable F no other accessories, manuals, modules, probes, orig. packing, etc. unless stated Contact via E-mail or call for more information. i.e. specs, images, pricing, options, exact shipping/handling quotes, etc General Policy/Terms & Conditions: Item is sold AS-IS unless otherwise noted (see item description). Item is sold without accessories probes, power cord, software, carrying case, etc.) unless specifically mentioned in the above description. No implied or expressed warranty unless otherwise stated. Item descriptions are as accurate as possible but may contain errors. Photo images are of the actual item. What you see is what you get. Technical information is provided as available. ROR: Item has 5 day ROR (right of return) for a full refund minus s/h BOTH WAYS. You pay return freight for ROR items. Refund is for bid amount only. Shipping, handling and Insurance is not refundable. Original shipping container and packaging materials must be retained for ROR items. HANDLING FEE IS NOT REFUNDABLE. Payment is expected within 3 days of auction end or time of purchase. We reserve the right to rescind any sale if not contacted within 3 days. PLEASE contact us IMMEDIATELY if you have a problem with our item(s) or service. We pride ourselves on exemplary customer service and communication. We work hard to satisfy all customers. Your feedback is important to us. PLEASE contact us BEFORE leaving negative feedback to discuss your concerns. We currently have skids of equipment that have yet to be placed in inventory, and we are looking to move items quickly. We need to make room! If you don't see what you need, contact us. Your much-needed piece of technology may still be waiting for a spot on our shelves! WARRANTY: Item is warranted for 90 days after it is received. During this period USED TEST EQUIPMENT will repair or replace, as it sees fit, the equipment at no charge to the customer. If any equipment should fail during the warranty period, AFTER RECEIVING RETURN AUTHORIZATION, it should be returned to USED TEST EQUIPMENT prepaid. Items damaged in shipping or through customer abuse are not covered by this warranty policy. NOTE - For domestic sales - in the event of a warranty repair we will cover the shipping cost to return the repaired unit back to you. For International sales - we will pay shipping cost to return the repaired unit to you. MAKE AN OFFER: Several factors determine our price reduction flexibility at any given time. We must consider market value, how 'hot' the item is, how many units we have in stock, etc. You can call 800-582-8378 to discuss. IN THE RARE EVENT A SOLD ITEM CAN NOT BE CALIBRATED BEFORE DELIVERY: Before our items are put into inventory they are lightly examined in our lab for operational status. Some are then stored in the warehouse until sold at which point it is brought back into the lab for a complete testing and the issuing of the 'CAL/CERT'. Others already have a 'CAL/CERT' issued before being placed in the warehouse. Though rare it is possible for the item to be found during the 'CAL/CERT' process to have a defect not apparent in the initial operational examination. At this point the item is fully reconditioned with the defect corrected... HOWEVER there are times the item my not be repairable or the manufacturer no longer has a part needed to correct the problem, OR the part may take a day or 2 or a week to arrive. We stock most parts here but there are the times we need to order it and it could happen the part is unavailable. We have multiple units of most of these items and can find one that is completely operational or take a part from one to fix the other. In the event the 'CAL/CERT' can not be issued we can recommend a different similar unit, work out a price reduction if the present condition is operational for your specific purpose OR we will gladly refund your payment in full with our sincerest apologies for your disappointment and inconvenience. Contact via E-mail or call for more information. i.e. specs, images, pricing, options, exact shipping/handling quotes, etc SHIPPING: HANDLING FEE FOR THIS ITEM IS $35.00 (professionally packed & shipped) eBay Shipping Calculator total includes the handling fee. Shipping costs are actual shipping charges plus handling which includes packaging material and time spent insuring safe delivery or your items. All orders are shipped F.O.B. Willow Grove, PA 19075 unless otherwise noted. Shipments are made via UPS Ground unless otherwise stated. We will ship via alternate methods providing: You provide the shipping label and/or account number Your preferred shipping method must be discussed and agreed upon BEFORE you bid on or purchase the item. Shipping costs will be combined on multiple item purchases We will ONLY ship to your confirmed address where a valid signature may be obtained. DAMAGED SHIPMENTS: In case of shipping damage, customer must file a claim with the shipper. The customer should inspect the shipping container upon arrival and note any evidence of damage on the freight receipt. If concealed damage is found after opening, the customer should file a claim with the carrier at once. You must retain the shipping container and packaging materials. Contact via E-mail or call for more information. i.e. specs, images, pricing, options, exact shipping/handling quotes, etc Scroll UP ? to View Multiple Images

Condition:	Seller refurbished: An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details. ...	Type	Impedance
Brand	Agilent/HP