Hp Designjet 500 24in Plotter C7769b - Fully Refurbished!!

US $11000

  • Utica, Michigan, United States
  • May 31st
 HP Designjet 500 Series Printers - Product Specifications Model numbers HP Designjet 500, 24-inch HP Designjet 500, 42-inch HP Designjet 500PS, 24-inch HP Designjet 500PS, 42-inch C7769B C7770B C7769C C7770C Printer features Embedded microprocessor (96 MHz. 16 MB SDRAM (48 MHz) Two (2) EIO slots (PCI-like) to connect accessories: LAN card and/or HP-GL/2 Accessory card (C7772A) Parallel (ECP) and USB connectivity as standard Graphical LCD (liquid crystal display) System software (firmware) always upgradeable No hard drive nor battery Languages supported: HP PCL3 GUI in all SKUs. Adobe (R) PostScript (R) Level 3 thru Software RIP in the 500PS 24 inch and 500PS 42 inch printers. System requirements HP Designjet 500 Microsoft (R) Windows 9X: Pentium (R) I-133 MHz or better 48 MB RAM 300 MB free on hard disk Microsoft Windows NT and 2000: Pentium II-300 Mhz or better 64 MB RAM 400 MB free on hard disk Recommended cables HP Designjet 500, 24-inch HP Designjet 500, 42-inch HP Designjet 500PS, 24-inch HP Designjet 500PS, 42-inch IEEE compatible/Centronics Interface (all), 3.0 meters (9.84 feet) 25-pin male USB 5.0 m (16.40 feet) USB plug IEEE compatible/Centronics Interface (all), 3.0 meters (9.84 feet) 25-pin male USB 5.0 m (16.40 feet) USB plug IEEE compatible/Centronics Interface (all), 3.0 meters (9.84 feet) 25-pin male USB 5.0 m (16.40 feet) USB plug IEEE compatible/Centronics Interface (all), 3.0 meters (9.84 feet) 25-pin male USB 5.0 m (16.40 feet) USB plug Media specifications Model Sheet sizes Roll sizes Core sizes 42-inch model 24-inch model Width: 21.08 cm to 106.68 cm (8.3 to 42 inches) Length: 21.08 to 189.73 (8.3 to 74.7 inches) Width: 21.08 cm to 60.96 cm (8.3 to 24 inches) Length: 21.08 cm to 189.73 (8.3 to 74.7 inches) Width: 60.96 cm, 91.44 cm, and 106.68 cm (24, 36, and 42 inches) Length: up to 45.72 m (up to 150 feet) Width: 60.96 cm (24 inches) Length: up to 45.72 m (up to 150 feet) 5.08 cm (2 inches) inside diameter 5.3975 cm (2.125) outside diameter Media handling information Sheet feed Roll feed Automatic cutter Margins Side margins, 5 mm Leading edge margin, 17 mm Trailing edge margin, 17 mm Ink information Supply item Ink cartridge Ink cartridge Printhead HP no.10 Black C4844A X X HP no.82 Cyan Magenta Yellow X C4911A C4912A C4913A X HP no.11 Black Cyan Magenta Yellow X X C4810A C4811A C4812A C4813A Resolution Print mode Line drawing/text Image Fast Render 300 x 300 dpi 150 x 150 dpi Halftone 600 x 300 dpi 600 x 300 dpi Normal Render 600 x 600 dpi 300 x 300 dpi Halftone 600 x 600 dpi 600 x 300 dpi Best (default) Render 600 x 600 dpi 600 x 600 dpi Halftone 600 x 600 dpi 600 x 600 dpi Best (maximum detail) Render 600 x 600 dpi 600 x 600 dpi Halftone 1200 x 600 dpi 1200 x 600 dpi Accuracy Accuracy: 0.2 percent of the specified vector length at 23 degrees C (73 degrees F), 50-60 percent relative humidity, on HP special polyester film. Memory information Standard: 16 MB Maximum: 160 MB (in combination with the HP-GL/2 accessory card and a 128 MB memory DIMM)NOTE: The HP-GL/2 accessory card is a pre-requisite to a memory upgrade. A basic 500 platform is PCL3GUI, which will never run out of memory, therefore has no memory upgrade slot was added to the printer. The memory upgrade slot is included on the HP-GL/2 card, which can benefit from additional memory. Physical specifications Attribute Specification Size 24-inch models 124.46 cm x 48.26 cm x 35.56 cm (49 inches x 19 inches x 14 inches) 42-inch models (70.18 cm x 68.58 cm x 109.22cm) (67 inches x 27 inches x 43 inches) Weight 24-inch models 38.55 kg (85 pounds) 42-inch models 44.90 kg (99 pounds) Electrical specifications Attribute Specification Power requirements 100 to 240 VAC 10 percent auto-ranging; 50 to 60 Hz, 2 amps maximum Power consumption 150 watts maximum Environmental specifications Attribute Specification Operating temperature 5.00 degrees to 40.00 degrees Celcius (C) (41 degrees to 104 degrees Fahrenheit (F)) Storage temperature 4.44 degrees to 70.00 degrees C (40 degrees to 158 degrees F) Relative humidity 15 percent to 80 percent RH Acoustic noise Pressure Printing: 52 dB (A)z Power 65 dB (A)

Directions

Similar products from Large Scale Printers

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies