Hp400ulx

US $240

North Richland Hills, Texas, United States
Jan 30th

Open on mobile:
QR code

HP400ULX, HP400ULM, HP400ULPD4CB, HP400ULPD8CB, Description The HP400UL Series is a line of power limited supplies/charg- ers that will convert 115 VAC/60 Hz input into a power limited 12 VDC or 24 VDC output at 4.0 A. They are used in applica- tions requiring UL Listing for Access Control (UL294), Fire Alarm (UL1481), and Burglar Alarm Installations (UL603). • HP400ULX — Includes the power supply, enclosure, trans- former and battery leads. • HP400ULM — Includes the power supply, HPMOM6 multi- output power distribution module, enclosure, transformer and battery leads. • HP400ULPD4CB — Includes the power supply, distribution board with 4 individually protected outputs with auto-reset- table PTCs, enclosure, transformer and battery leads. • HP400ULPD8CB — Includes the power supply, HPD8CB individually protected with auto-reset PTCs, enclosure, transformer, and battery leads. • HP400ULACM4 — Includes the power supply, HPACM4 power controller with four independently controlled power- limited PTC protected outputs, enclosure, transformer, and battery leads. Benefits • An all-in-one power supply and distribution unit enclosed in a roomy cabinet. • Transformer thermal protection limits damage from over- loaded circuits. • LED lights for quick and easy diagnosis, troubleshooting, and status indication. • Comes fully assembled with accessories included for quick installation. • Enclosure built for durability and product life. • Power disconnect cord for easy servicing. • Power cord included; three conductors for ground safety convenience. • Instantaneous switchover to standby battery (if equipped) when AC fails, maintaining power to all attached devices without intervention. Specifications • UL294 for use with Access Control Systems. • UL1481 for use with Fire Alarm Systems. • UL603 for use with Burglar Alarm Installations. • Switch selectable 12 VDC or 24 VDC power-limited output. • Input: 115 VAC/60 Hz, 2.5 A. • 4.0 A continuous supply current at 12 VDC or 24 VDC. • Filtered and electronically regulated outputs. • Built-in charger for sealed lead-acid or gel-type batteries. Charge current 600 mA. • Automatic switch-over to standby battery when AC fails. • AC input and DC output LED indicators. • AC fail supervision (Form "C" contacts). • Low battery supervision (Form "C" contacts). • Low battery disconnect prevents battery from deep dis- charge. • Thermal overload protection. • Short circuit protection. • Includes battery leads. • Enclosure dimensions: 13.0" H x 13.5" W x 3.25" D (cm: 33.02 H x 34.29 W x 8.26 D). NOTE: Enclosure accommodates up to two 12 AH batteries. Distribution Board Specifications • HPMOM6 — 6 output PTC protected power distribution board (see HPMOM6 data sheet for full details). • 4 output distribution board — PTC protected circuits rated at 2.5 A each. • 8 output distribution board — PTC protected circuits rated at 2.5 A each. • HPACM4 — 4 output distribution board and controller with PTC protected outputs. These outputs can also be config- ured as dry Form “C” contacts (see DH-1022 for full details). Listings and Approvals Listings and approvals below apply to all. In some cases, cer- tain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. • UL Listed for Access Control Systems; UL294. File: S6677 • UL Listed for Fire Alarm Systems; UL1481. • UL Listed for Burglar Alarm Systems; UL603. • CSFM: 7300-1637:101

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Honeywell
Type	Control Panels & Keypads
Model	HP400ULX