HP8672A Signal Generator - 2 to 18Ghz, US $1,250.00 – Picture 0

HP8672A Signal Generator - 2 to 18Ghz, US $1,250.00 – Picture 1

Hp8672a Signal Generator - 2 To 18ghz

US $1,250.00

Phoenix, Arizona, United States
Mar 9th

Open on mobile:
QR code

HP 8672A Signal Generator The HP 8672 Synthesized Signal Generator has a frequency range of 2.0 to 18.0 GHz. The output is leveled and calibrated from +8 dBm to -120 dBm. Frequency, output level, modulation, and ALC modes can be remotely programmed via HP-IB. The frequency can be tuned with one of four frequency resolutions. Tuning resolutions of 100 MHz, 1 MHz, 10 kHz, or 1 kHz are selected by front panel pushbuttons. The 1 kHz tuning resolution will give tuning resolutions of 1 kHz for frequencies from 2.0 to 6.2 GHz, 2 kHz for frequencies from 6.2 to 12.4 GHz, and 3 kHz for frequencies from 12.4 to 18.599997 GHz. Long-term frequency stability is dependent on the time base, either an internal or external reference oscillator. The internal crystal reference oscillator operates at 10 MHz while an external oscillator may operate at 5 or 10 MHz. The output of the signal generator is exceptionally flat due to the action of the internal automatic leveling control (ALC). External leveling control using a diode detector or a power meter to sense output power can be used to levelthe output at a remote load. Both amplitude and frequency modulation capabilities are available in the signal generator using either front panel switches or remote programming. External drive signals are required for both AM and FM operation. AM depth and FM deviation vary linearly with the applied external voltage. Full scale modulation is attained with 1.0 V peak. Two ranges of AM depth are selectable: 30% and 100%. Six ranges of FM deviation are selectable: 0.03, 0.1, 0.3, 1.3, and 10 MHz. The front panel meter indicates output level, AM depth, or FM peak deviation. Meter indication mode and external leveling are selected by a front panel switch. A power meter or crystal detector may be used as the external detector.Phase-locked reference outputs of 10 and 100 MHz are available on the rear panel. Six status indicators on the front panel make operating the signal generator easier. The signal generator is fully programmable via the HP-IB. In the remote mode all front panel controls are disabled except the LINE and METER MODE switches. Frequency range: 2.0 - 18.0 GHz Frequency resolution: 1 - 3 kHz RF Output: Standard: +8 dBm to -120 dBm Modulation: AM, FM Signal Generator pulled from working lab at General Dynamics in Scottsdale, AZ. Ships with Unit Only.... Thank You for Looking ! !

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Pulled from General Dynamics Lab...”