Hpw400-b18 Portable Fire Supression Pump

US $4,500.00

Summerfield, Florida, United States
Jan 29th

Open on mobile:
QR code

SELLER AGREES UPON RECIEPT OF PAYMENT TO SPLIT COST OF SHIPMENT 50%-50% Transportable pump with base fuel tank and wraparound frame configured for full portable applications and easy installation by truck builders. . Built in priming system and Rotating discharge valve for quick and easy hose layout. The pumping unit is mounted on a steel skid base and is equipped with four handles to provide for two man portability and vibration isolators attached to a steel skid base plate that can easily be mounted into any vehicle. A remote instrument panel with mounted single discharge gauge and engine controls is included. INSTRUMENT PANEL DISPLAY Suction Gage PUMP FLOW/Discharge Pressure Gage Engine Throttle Control and Push Button Electric Start Control Ideal for applications such as: Transfer and Supply Tank Refilling Low pressure firefighting with multiple lines ENGINE: MAKE: BRIGGS AND STRATTON VANGUARD™ MODEL: 350447 Series TYPE: Horizontal Shaft, Air Cooled, V-Twin, OHV, Electric Start HORSEPOWER: 18 BHP (13.4 kW) at 4000 RPM TORQUE: 40.7 N-m (30 ft-lb) Max. at 2600 RPM BORE x STROKE: 72 x 77 mm (2.83 x 2.75 in) DISPLACEMENT: 570 cc (34.75 cu in) OIL CAPACITY: 1.4 liter (3.0 pint) FUEL TANK: Cross linked Polyethylene FUEL CAPACITY: 12 liters (3 gallons) 2 Hours Run Time ELECTRICAL: 16 AMP Alternator EMISSIONS: Meets 1994 California Air Resources Board (CARB) Standards Provided with a marine grade quick connect electrical socket. This socket is used to power the light mast for night time operations. The same electrical socket can also be used to connect a trickle charger to ensure the battery is charged and the pump is always in a ready state. PUMP: MFG Hale Products MAX FLOW 550 GPM MAX PRESSURE 100 PSI Length (Inches) HPW 28 Width (Inches) HPW 19-1/4 Height (Inches) HPW 21-15/16 Weight (Pounds) HPW - 185 Suction: HPW 4" Male NH Thread Discharge: HPW: 2-1/2" Male NH Thread Swivel valves swings 175 degrees for ease of hose layout Priming: Exhaust venturi - 20 inches HG priming $7879.80 MSRP

Condition	New other (see details) : A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“NEW Condition, tested and verified Engine, Pump, Pump Primer, engine control Panel, Pressure Gages opration”