HS Aero-seal bag closer Bemis packaging heat sealer 4601 model D, US $9,450.00 – Picture 0

HS Aero-seal bag closer Bemis packaging heat sealer 4601 model D, US $9,450.00 – Picture 1

HS Aero-seal bag closer Bemis packaging heat sealer 4601 model D, US $9,450.00 – Picture 2

HS Aero-seal bag closer Bemis packaging heat sealer 4601 model D, US $9,450.00 – Picture 3

HS Aero-seal bag closer Bemis packaging heat sealer 4601 model D, US $9,450.00 – Picture 4

HS Aero-seal bag closer Bemis packaging heat sealer 4601 model D, US $9,450.00 – Picture 5

HS Aero-seal bag closer Bemis packaging heat sealer 4601 model D, US $9,450.00 – Picture 6

HS Aero-seal bag closer Bemis packaging heat sealer 4601 model D, US $9,450.00 – Picture 7

HS Aero-seal bag closer Bemis packaging heat sealer 4601 model D, US $9,450.00 – Picture 8

HS Aero-seal bag closer Bemis packaging heat sealer 4601 model D, US $9,450.00 – Picture 9

Hs Aero-seal Bag Closer Bemis Packaging Heat Sealer 4601 Model D

US $9,450.00

El Dorado, Kansas, United States
Jan 30th

Open on mobile:
QR code

This Bemis hot sealer Series 4601 model D is manufactured by Packaging service industries. Instruction manual INCLUDED!!!! with instructions on lubrication, parts numbers, operating procedures, maintenance requirements and much more. Serial number 9460110783D 230V 3 phase 60Hz MORE photos available on request. The Bemis 401 "H.S. Aero-Seal" bag closer is designed to close stepped-end multi-wall bags after the filling operation. The bags have a pre-applied adhesive on the "step". Therefore, the bag closer activates the hot melt adhesive and folds over the top to seal the closure. The closing device is mounted on a rigid adjustable stand. This machine incorporates a heat seal unit which is located at the entry end of the closer. It consists of 37-1/2" spring loaded heater bars designed to seal polyethylene inner liners. As the filled bag moves along the conveyor, the bag top is hand formed and fed into the entrance guide of the bag closer. V-belts then convey the bag top through the bag closer. The bag top first enters between the heater bars which seal an inner liner. Next, the bag goes between the creasing rollers to set the fold line. The bag is then folded 90 degrees and enters above the hot air nozzle where hot air, under regulated pressure and temperature, is forced against the hot melt adhesive to activate it. The bag top then passes through a series of compression rollers to compress the fold and set the adhesive. Features: * Adjustable control of the high capacity heaters. * Special heat manifold properly distributes hot air for maximum efficiency. * Safe, easy to feed entry guide assures accurate folding. * Variable speed drive insures exact synchronization with conveyor speed. * Air jet to clean seal area. * Sealing attachment for polyethylene or foil lined bags. Provides hermetic seal for maximum protection of hydroscopic materials. The rugged welded steel construction, easy changeover adjustment, lifetime sealed bearings, Teflon pressure belts, and an air switch that prevents burnout or overheating are among the other features that give dependable, low maintenance operation from the Bemis Aero-Seal Closer. SPECIFICATIONS Dimensions: (Approximate) Length — 104" (2641 mm) including 10-1/2" (266 mm) entry guide Depth — 32" Height' — Overall maximum -- 79" (2006 mm). Floor to bag top adjustable 34-1/2" (876 mm) to 65-1/2" (1663 mm) 'Add 5" (127 mm) if on casters Power Requirements: Control circuit and heaters 230V 60Hz AC Maximum current draw — 22 amps @ 230V per leg Drive motor 230/460V 3 phase 60 cycle AC (3/4 HP) —230V —3.10 amps 460V —:1.55 amps Air Requirement: 8 cu ft (225 liters) free air per minute at 5-8 PSI (.35-.56 Kg per sq cm) Speed: Adjustable 23-43 ft. per minute (6.9-13 IUSAftinute) Shipping Weight: Approximately 1250 lbs (568 Kg) FOB El dorado KS. Sold AS IS. Please check with us prior to bidding - we can help organize a fair freight quote. NOTE: This machine does not fit on a pallet. International Buyers Hablo Espanol. Import duties & customs fees are not included in the price or shipping charges (unless it ships through the GSP).

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“See photos. Sold AS IS.”