+ Post new Ad
HSK63AEM100375 HSK 1 End Mill Adapter Erickson (1015226), US $85.00 – Picture 0
HSK63AEM100375 HSK 1 End Mill Adapter Erickson (1015226), US $85.00 – Picture 0

Hsk63aem100375 Hsk 1 End Mill Adapter Erickson (1015226)

US $85.00

  • Matthews, North Carolina, United States
  • Mar 12th
Open on mobile:
QR code
ANSI Code:HSK63AEM100375Adapter/Shank/Bore Dia-Workpiece Side (in):1.0000Adapter/Shank/Bore Dia-Workpiece Side (mm):25.400Body Dia-Workpiece Side (in):2.0000Body Dia-Workpiece Side (mm):50.800Clamp Screw Size:3/8"Clamping Length (in):2.4600Clamping Length (mm):62.484Gage Length (in):3.7500Gage Length (mm):95.250ISO Code:HSK63AEM100375Style:Form ASystem Size Machine Side:HSK63ASystem of Measurement:InchType:Taper Shank End Mill AdapterUsable Length (in):2.7280Usable Length (mm):69.291Product Weight:1.9996 lbs.Applications:End mill adapters used to grip straight shank end mills and used in milling applications"Notes:HSK63A Shank Tools End Mill Adapters Form A for automatic tool change is the most common HSK shank, typically used on new machining centers and general service High axial and radial repeatability Form A has a drive slot in the small end of the tapered shank and features coolant through the center, using a coolant tube thread mount inside the shank cavity In Many applications, wrench access holes are provided through the taper as an option for manual clamping and automatic tool change shanks Form A shanks have mounting holes for an electronic chip Supplied with stop screw HSK coolant unit and wrench are available and must be ordered separately Maximum coolant pressure 1,500 PSI The tools are either prebalanced to a high specification or balanced-by-design and will perform effectively up to 15,000 RPM
Condition:
New other (see details): A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer Erickson

Directions

Similar products from Other Workholding Tools

Lot of 91 pcs Aircraft/Aviation Tools Mono-Lock & W/L Clecos

Lot of 91 pcs Aircraft/Aviation Tools Mono-Lock & W/L Clecos

  • South Gate, California, United States
  • Mar 25th
Taft - Peirce sine bar No. 9118 , 2-1/8" wide , 5" between rolls

Taft - Peirce sine bar No. 9118 , 2-1/8" wide , 5" between rolls

  • Addison, Illinois, United States
  • Mar 25th
LARGE LOT OF BOLTS, SET SCREWS, BOLTS, AND NUTS

LARGE LOT OF BOLTS, SET SCREWS, BOLTS, AND NUTS

  • La Mirada, California, United States
  • Mar 25th
South Bend telescopic steady rest for 16" swing lathe

South Bend telescopic steady rest for 16" swing lathe

  • Addison, Illinois, United States
  • Mar 25th
2" LATHE DRIVER DOG TOOL 4 ATLAS CRAFTSMAN SOUTH BEND LOGAN MACHINIST

2" LATHE DRIVER DOG TOOL 4 ATLAS CRAFTSMAN SOUTH BEND LOGAN MACHINIST

  • United States
  • Mar 25th
MACHINIST TOOLS LATHE MILL Starrett Screw Jack in Box

MACHINIST TOOLS LATHE MILL Starrett Screw Jack in Box

  • Morris Plains, New Jersey, United States
  • Mar 25th
Spanner Wrenches Lathe Chuck Wrenches Fairmont 7/8" Armstrong 5/8" & More

Spanner Wrenches Lathe Chuck Wrenches Fairmont 7/8" Armstrong 5/8" & More

  • Garden Grove, California, United States
  • Mar 25th
System 3r 6-EX7 Magnetic Chuck FG29

System 3r 6-EX7 Magnetic Chuck FG29

  • Bloomfield, Connecticut, United States
  • Mar 12th
Bilz WE2 7/16" Quick Change Tapping Adaptor Size 2 Shank .32" Square .24" NEW

Bilz WE2 7/16" Quick Change Tapping Adaptor Size 2 Shank .32" Square .24" NEW

  • Cedar Falls, Iowa, United States
  • Mar 12th
Williams HomeCraft * Metal Box Only * VINTAGE TOOL HOLDER South Bend Lathe Atlas

Williams HomeCraft * Metal Box Only * VINTAGE TOOL HOLDER South Bend Lathe Atlas

  • Garwood, New Jersey, United States
  • Mar 12th
MACHINIST LATHE MILL 2 Machinist Screw Jacks

MACHINIST LATHE MILL 2 Machinist Screw Jacks

  • Morris Plains, New Jersey, United States
  • Mar 12th
new ECLIPSE 922 High Power MAGNETIC POSITIONER 6 1/2" x 2" x 2 1/2" 229 lb pull

new ECLIPSE 922 High Power MAGNETIC POSITIONER 6 1/2" x 2" x 2 1/2" 229 lb pull

  • Champlain, New York, United States
  • Mar 11th
Atlas PressKalamazoo Lathe Straight Tool Holder/Armstrong No.2010R Left/Right

Atlas PressKalamazoo Lathe Straight Tool Holder/Armstrong No.2010R Left/Right

  • Millbrae, California, United States
  • Mar 11th
Used Warner & Swasey #4 Morse Taper Adapter, 5.75" OAL, 1.5" OD, M-949-No.4

Used Warner & Swasey #4 Morse Taper Adapter, 5.75" OAL, 1.5" OD, M-949-No.4

  • Bristol, Connecticut, United States
  • Mar 11th
Used Union Twist Drill Co. Steel Morse Taper #4 Socket to #5 Shank Adapter

Used Union Twist Drill Co. Steel Morse Taper #4 Socket to #5 Shank Adapter

  • Bristol, Connecticut, United States
  • Mar 11th
Steel Parallel Assortment 9-Pc’s Random Lengths & Heights

Steel Parallel Assortment 9-Pc’s Random Lengths & Heights

  • Rome, New York, United States
  • Mar 10th
Machinists Jack Set

Machinists Jack Set

  • Naubinway, Michigan, United States
  • Mar 10th
HURON 3 COLLET PAD JAWS H027M8CPJ1026 FITS 8" KITAGAWA OR EQUIVALENT CHUCK

HURON 3 COLLET PAD JAWS H027M8CPJ1026 FITS 8" KITAGAWA OR EQUIVALENT CHUCK

  • Buffalo, New York, United States
  • Mar 10th
LOT OF MACHINIST TOOLS LUFKIN MITUTOYO ETC

LOT OF MACHINIST TOOLS LUFKIN MITUTOYO ETC

  • South El Monte, California, United States
  • Mar 9th
ERICKSON COLLETS SERIES 100 KENNAMETAL COLLET HOLDER 1" SHANK

ERICKSON COLLETS SERIES 100 KENNAMETAL COLLET HOLDER 1" SHANK

  • South El Monte, California, United States
  • Mar 9th

People who viewed this item also vieved

De-sta-Co 317 clamp welding fixture tooling clamp

De-sta-Co 317 clamp welding fixture tooling clamp

  • Hazel Green, Wisconsin, United States
  • Jan 30th
PAIR OF SMALL MACHINIST CLAMPS, NO MANUFACTURES NAME SHOWN, 4" LONG

PAIR OF SMALL MACHINIST CLAMPS, NO MANUFACTURES NAME SHOWN, 4" LONG

  • Spokane, Washington, United States
  • Jan 30th
C CLAMPS WILTON ARMSTRONG LOT OF 8 CHEAP!!!TAKE A LOOK!!!!!!!!!!!!!!!!!!!!!!!!!!

C CLAMPS WILTON ARMSTRONG LOT OF 8 CHEAP!!!TAKE A LOOK!!!!!!!!!!!!!!!!!!!!!!!!!!

  • Shoreham, New York, United States
  • Jan 30th
150TG SINGLE-ANGLE TOOLHOLDER COLLET 1-1/8" #6040

150TG SINGLE-ANGLE TOOLHOLDER COLLET 1-1/8" #6040

  • Resaca, Georgia, United States
  • Jan 30th
HARDINGE 22C 1 1/32" ROUND COLLET BORED TO 1 1/8 SERRATED #6098

HARDINGE 22C 1 1/32" ROUND COLLET BORED TO 1 1/8 SERRATED #6098

  • Resaca, Georgia, United States
  • Jan 30th
150TG SINGLE-ANGLE TOOLHOLDER COLLET 53/64 #6025

150TG SINGLE-ANGLE TOOLHOLDER COLLET 53/64 #6025

  • Resaca, Georgia, United States
  • Jan 30th
Vintage Milling Clamp and Spiral Step 3/4 Stud machine table mill tooling finger

Vintage Milling Clamp and Spiral Step 3/4 Stud machine table mill tooling finger

  • Windsor, Virginia, United States
  • Jan 30th
ZAGAR COLLET FIXTURE, 791-1200, AIR/HYDRAULIC,1/8" NPT

ZAGAR COLLET FIXTURE, 791-1200, AIR/HYDRAULIC,1/8" NPT

  • Coffeyville, Kansas, United States
  • Jan 30th
Midaco Cast Aluminum Pallet's removed from a Fadal CNC VMC/Midaco Series 40

Midaco Cast Aluminum Pallet's removed from a Fadal CNC VMC/Midaco Series 40

  • North Billerica, Massachusetts, United States
  • Jan 30th
Vintage Mini-Vise for Watch/Metalworking. C&E Marshall Co.

Vintage Mini-Vise for Watch/Metalworking. C&E Marshall Co.

  • Pottsville, Pennsylvania, United States
  • Jan 30th
PALMGREN MACHINIST ANGLE TILTING VISE 2 7/16" WIDE JAWS

PALMGREN MACHINIST ANGLE TILTING VISE 2 7/16" WIDE JAWS

  • United States
  • Jan 30th
celf centering vise for milling drilling set up etc bridgeport

celf centering vise for milling drilling set up etc bridgeport

  • Hopatcong, New Jersey, United States
  • Jan 30th
Buck Chuck Jaw Set of 3 for 6in Buck Chuck No. 6538 Commonly used on Hardinge

Buck Chuck Jaw Set of 3 for 6in Buck Chuck No. 6538 Commonly used on Hardinge

  • Berkeley, California, United States
  • Feb 13th
BUCK CHUCK 6 JAW AJUST TRU 2066 6" LATHE CHUCK 1 1/2" 8 tpi

BUCK CHUCK 6 JAW AJUST TRU 2066 6" LATHE CHUCK 1 1/2" 8 tpi

  • Spring Valley, California, United States
  • Feb 13th
HARDINGE TAIL STOCK CENTER T-800

HARDINGE TAIL STOCK CENTER T-800

  • Berkeley, California, United States
  • Feb 13th
Dead center for metal lathe bolt on

Dead center for metal lathe bolt on

  • Fort Lauderdale, Florida, United States
  • Feb 13th
Live Center; Royal 'Versa-Turn' #10034; #4 Morse taper (CTAM# 7108)

Live Center; Royal 'Versa-Turn' #10034; #4 Morse taper (CTAM# 7108)

  • Sicklerville, New Jersey, United States
  • Feb 13th
3 jaw Kitagawa hydralic lathe chuck

3 jaw Kitagawa hydralic lathe chuck

  • Thaxton, Virginia, United States
  • Feb 13th
1 Machinist V- Block

1 Machinist V- Block

  • Cherry Hill, New Jersey, United States
  • Apr 24th
Magnetic Transfer Machinst V Block marked

Magnetic Transfer Machinst V Block marked

  • Jersey City, New Jersey, United States
  • Apr 24th
Machinist 3 Pairs Of Parallels Hardened Ground Tool Maker Made.

Machinist 3 Pairs Of Parallels Hardened Ground Tool Maker Made.

  • Yorktown, Indiana, United States
  • Apr 24th
Used Haas SC0HC Servo Control Box Programmable 4th 4 Axis rotary

Used Haas SC0HC Servo Control Box Programmable 4th 4 Axis rotary

  • Hudson, Florida, United States
  • May 20th
A.G. Davis/AA Gage 12" Autodex with 180 deg Reciprocating Index Rotary Table

A.G. Davis/AA Gage 12" Autodex with 180 deg Reciprocating Index Rotary Table

  • Shippensburg, Pennsylvania, United States
  • May 21st
Haas 5c single axis indexer

Haas 5c single axis indexer

  • West Hartford, Connecticut, United States
  • May 21st
MACHINIST TOOLS * VALENITE COLLET CHUCK CAT 50 / TG 100 (V50CT-10SG-35) +

MACHINIST TOOLS * VALENITE COLLET CHUCK CAT 50 / TG 100 (V50CT-10SG-35) +

  • Camarillo, California, United States
  • Jun 21st
ISO30 ERC32 ERICKSON COLLET CHUCK

ISO30 ERC32 ERICKSON COLLET CHUCK

  • Ashdod, Israel
  • Jun 22nd
Kennametal QC40QC40344 Quick Change

Kennametal QC40QC40344 Quick Change

  • Brush Prairie, Washington, United States
  • Jun 23rd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies