+ Post new Ad
HSS END MILL LOT OF 25 - ASSORTED USED - 1/4", 5/16", 3/8", 13/32", 7/16", 1/2", US $34.99 – Picture 0
HSS END MILL LOT OF 25 - ASSORTED USED - 1/4", 5/16", 3/8", 13/32", 7/16", 1/2", US $34.99 – Picture 1
HSS END MILL LOT OF 25 - ASSORTED USED - 1/4", 5/16", 3/8", 13/32", 7/16", 1/2", US $34.99 – Picture 2
HSS END MILL LOT OF 25 - ASSORTED USED - 1/4", 5/16", 3/8", 13/32", 7/16", 1/2", US $34.99 – Picture 3
HSS END MILL LOT OF 25 - ASSORTED USED - 1/4", 5/16", 3/8", 13/32", 7/16", 1/2", US $34.99 – Picture 4
HSS END MILL LOT OF 25 - ASSORTED USED - 1/4", 5/16", 3/8", 13/32", 7/16", 1/2", US $34.99 – Picture 5
HSS END MILL LOT OF 25 - ASSORTED USED - 1/4", 5/16", 3/8", 13/32", 7/16", 1/2", US $34.99 – Picture 6
HSS END MILL LOT OF 25 - ASSORTED USED - 1/4", 5/16", 3/8", 13/32", 7/16", 1/2", US $34.99 – Picture 7
HSS END MILL LOT OF 25 - ASSORTED USED - 1/4", 5/16", 3/8", 13/32", 7/16", 1/2", US $34.99 – Picture 8
HSS END MILL LOT OF 25 - ASSORTED USED - 1/4", 5/16", 3/8", 13/32", 7/16", 1/2", US $34.99 – Picture 0
HSS END MILL LOT OF 25 - ASSORTED USED - 1/4", 5/16", 3/8", 13/32", 7/16", 1/2", US $34.99 – Picture 1
HSS END MILL LOT OF 25 - ASSORTED USED - 1/4", 5/16", 3/8", 13/32", 7/16", 1/2", US $34.99 – Picture 2
HSS END MILL LOT OF 25 - ASSORTED USED - 1/4", 5/16", 3/8", 13/32", 7/16", 1/2", US $34.99 – Picture 3
HSS END MILL LOT OF 25 - ASSORTED USED - 1/4", 5/16", 3/8", 13/32", 7/16", 1/2", US $34.99 – Picture 4
HSS END MILL LOT OF 25 - ASSORTED USED - 1/4", 5/16", 3/8", 13/32", 7/16", 1/2", US $34.99 – Picture 5
HSS END MILL LOT OF 25 - ASSORTED USED - 1/4", 5/16", 3/8", 13/32", 7/16", 1/2", US $34.99 – Picture 6
HSS END MILL LOT OF 25 - ASSORTED USED - 1/4", 5/16", 3/8", 13/32", 7/16", 1/2", US $34.99 – Picture 7
HSS END MILL LOT OF 25 - ASSORTED USED - 1/4", 5/16", 3/8", 13/32", 7/16", 1/2", US $34.99 – Picture 8

Hss End Mill Lot Of 25 - Assorted Used - 1/4", 5/16", 3/8", 13/32", 7/16", 1/2"

US $34.99

  • Denver, Colorado, United States
  • Jan 30th
Open on mobile:
QR code
HSS END MILL SET OF 25 - USED USED END MILL SET OF 25.HSS CONSTRUCTION.MANUFACTURERS UNKNOWN.NO INSTRUCTIONS OR PACKAGING. SET INCLUDES :1/4" : SEVEN INCLUDED. FOUR 2-FLUTE. THREE 4-FLUTE. 5/16" : TWO INCLUDED. ONE 2-FLUTE. ONE 4-FLUTE. 3/8" : ELEVEN INCLUDED. SIX 2-FLUTE. FIVE 4-FLUTE. 13/32" : ONE INCLUDED. 4-FLUTE. 7/16" : THREE INCLUDED. TWO 2-FLUTE. ONE 4-FLUTE.. 1/2" : ONE INCLUDED. 2-FLUTE. USED END MILL SET - VARIOUS DEGREES OF SHARPNESS, SEE TIP PICTURES - NO BROKEN FLUTES - SCRATCHES & FINISH WEAR - AGES UNKNOWN - SOLD AS IS
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “USED END MILL LOT.”

Directions

Similar products from End Mills Router & Drill Bits

METAL REMOVAL Carbide Double End Mill 1/2" 2FL 5/8" x 3" M31731 <600>

METAL REMOVAL Carbide Double End Mill 1/2" 2FL 5/8" x 3" M31731 <600>

  • Saint Louis, Missouri, United States
  • Jan 30th
METAL REMOVAL Carbide Square End Mill 5/8&#034; 6FL TiCN 1-1/4&#034; x 3-1/2&#034; M33915 &lt;600&gt;

METAL REMOVAL Carbide Square End Mill 5/8" 6FL TiCN 1-1/4" x 3-1/2" M33915 <600>

  • Saint Louis, Missouri, United States
  • Jan 30th
METAL REMOVAL Carbide Square End Mill 3/4&#034; 4FL 2-1/4&#034; x 5&#034; M33622 &lt;600&gt;

METAL REMOVAL Carbide Square End Mill 3/4" 4FL 2-1/4" x 5" M33622 <600>

  • Saint Louis, Missouri, United States
  • Jan 30th
HARVEY Carbide Ball End Mill 5/16&#034; 2FL AlTiN 4&#034; OAL 18920-C6 &lt;323&gt;

HARVEY Carbide Ball End Mill 5/16" 2FL AlTiN 4" OAL 18920-C6 <323>

  • Saint Louis, Missouri, United States
  • Jan 30th
LOT OF 5 HSS COUNTERSINKS 1-1/2&#034; TO 2&#034; WITH 5/8&#034; AND 7/8&#034; Shank

LOT OF 5 HSS COUNTERSINKS 1-1/2" TO 2" WITH 5/8" AND 7/8" Shank

  • Ellington, New York, United States
  • Jan 30th
14 HSS DBL. SINGLE BALL NOSE REG. END MILLS 7/8&#034; TO 1-1/4&#034; W/ 7/8 TO 1-1/8 BORE

14 HSS DBL. SINGLE BALL NOSE REG. END MILLS 7/8" TO 1-1/4" W/ 7/8 TO 1-1/8 BORE

  • Ellington, New York, United States
  • Jan 30th
NEW!! LOT OF 23 HSS SINGLE AND DOUBLE END MILLS 3/32&#034; TO 3/8&#034; PUTNAM

NEW!! LOT OF 23 HSS SINGLE AND DOUBLE END MILLS 3/32" TO 3/8" PUTNAM

  • Ellington, New York, United States
  • Jan 30th
1 SOLID CARBIDE END MIL 3/4 x 4.0&#034; , 2 FLUTE,BALL END

1 SOLID CARBIDE END MIL 3/4 x 4.0" , 2 FLUTE,BALL END

  • Sedona, Arizona, United States
  • Jan 30th
2 SOLID CARBIDE END MILS 3/8 X 4.0&#034; , 2 FLUTE, CENTER CUTTING.

2 SOLID CARBIDE END MILS 3/8 X 4.0" , 2 FLUTE, CENTER CUTTING.

  • Sedona, Arizona, United States
  • Jan 30th
1 SOLID CARBIDE END MIL 3/4 x 6.0&#034; , 2 FLUTE, CENTER CUTTING.

1 SOLID CARBIDE END MIL 3/4 x 6.0" , 2 FLUTE, CENTER CUTTING.

  • Sedona, Arizona, United States
  • Jan 30th
LOT OF 3 SOLID CARBIDE END MILLS 1/16&#034; TO 1/2&#034; MELIN USA

LOT OF 3 SOLID CARBIDE END MILLS 1/16" TO 1/2" MELIN USA

  • Ellington, New York, United States
  • Jan 30th
2 SOLID CARBIDE END MILS 3/4 x 4.0&#034; , 4 FLUTE, CENTER CUTTING.

2 SOLID CARBIDE END MILS 3/4 x 4.0" , 4 FLUTE, CENTER CUTTING.

  • Sedona, Arizona, United States
  • Jan 30th
(5) 0.45mm (.0177&#034;) 2 FLUTE MICRO CARBIDE ENDMILLS Kyocera Tycom

(5) 0.45mm (.0177") 2 FLUTE MICRO CARBIDE ENDMILLS Kyocera Tycom

  • Georgetown, Texas, United States
  • Jan 30th
Drill Master 20pc Tin Coated End Mill Set:For Slot/Pocket/Keyway/Profile Cutting

Drill Master 20pc Tin Coated End Mill Set:For Slot/Pocket/Keyway/Profile Cutting

  • Greenville, South Carolina, United States
  • Jan 30th
VINTAGE GARR 2-5/16&#034; DIA END MILL HEAVY DUTY BIT 12 FLUTES MILLING CUTTER

VINTAGE GARR 2-5/16" DIA END MILL HEAVY DUTY BIT 12 FLUTES MILLING CUTTER

  • Gloucester, Virginia, United States
  • Jan 30th
1 inch Niagara Carbide Endmill 3FL SE 1-1/2 x 4 TIALN

1 inch Niagara Carbide Endmill 3FL SE 1-1/2 x 4 TIALN

  • Windsor, Connecticut, United States
  • Jan 30th
1/4&#034; x 3/8&#034; 4FL &amp; 1/4&#034; x 3/8&#034; 2FL DE COBALT End Mill WELDON USA LOT NEW UNUSED

1/4" x 3/8" 4FL & 1/4" x 3/8" 2FL DE COBALT End Mill WELDON USA LOT NEW UNUSED

  • Panama City Beach, Florida, United States
  • Jan 30th
1/2 carbide end mill 4 flutes

1/2 carbide end mill 4 flutes

  • United States
  • Jan 30th
(3pcs) 1/2 TITAN Carbide Endmill 4F BN ALTIN

(3pcs) 1/2 TITAN Carbide Endmill 4F BN ALTIN

  • Windsor, Connecticut, United States
  • Jan 30th
Ball &amp; Round Over End Mills - 38 Pieces - HS Exclusive Collection - SKU2028

Ball & Round Over End Mills - 38 Pieces - HS Exclusive Collection - SKU2028

  • Port Sydney, ON, Canada
  • Jan 30th

People who viewed this item also vieved

10- DIJET carbide inserts JCB2075LT, 11103-X8168 Grade JC3552 **NEW**

10- DIJET carbide inserts JCB2075LT, 11103-X8168 Grade JC3552 **NEW**

  • Auburn, Washington, United States
  • Mar 2nd
10- DIJET carbide inserts JCB2100LT, 11103-X8170 Grade JC3552 **NEW**

10- DIJET carbide inserts JCB2100LT, 11103-X8170 Grade JC3552 **NEW**

  • Auburn, Washington, United States
  • Mar 2nd
McMASTER CARR Double Cut Carbide Burs 1/4&#034; 3/8&#034; 5/16&#034; SD-3 4292A34 BALL END

McMASTER CARR Double Cut Carbide Burs 1/4" 3/8" 5/16" SD-3 4292A34 BALL END

  • Oswego, New York, United States
  • Mar 2nd
MESA TOOLS CBT-500BRT C2 CARBIDE BORING BAR

MESA TOOLS CBT-500BRT C2 CARBIDE BORING BAR

  • La Habra, California, United States
  • Mar 2nd
Grizzly G9449 Chucking Reamer HSS 7/8-Inch

Grizzly G9449 Chucking Reamer HSS 7/8-Inch

  • United States
  • Mar 9th
Morse Taper Reamer Cutter

Morse Taper Reamer Cutter

  • Elk Grove Village, Illinois, United States
  • Mar 9th
1 Ton Aviation Power Punch Kit Sheet Metal Hole Punching 7 Sizes Die DIY Repair

1 Ton Aviation Power Punch Kit Sheet Metal Hole Punching 7 Sizes Die DIY Repair

  • Rowland Heights, California, United States
  • Mar 25th
vintage 3/8&#034; steel 9 pc number punch die set in original wooden box

vintage 3/8" steel 9 pc number punch die set in original wooden box

  • Hurricane, Utah, United States
  • Mar 25th
Grob 4V-36 Bandsaw

Grob 4V-36 Bandsaw

  • Catskill, New York, United States
  • May 25th
Box of 12-1817995 -15&#039;4&#034;X1/4&#034;X.025 14/18V DIEMASTER 2 BANDSAW BLADES *PA*

Box of 12-1817995 -15'4"X1/4"X.025 14/18V DIEMASTER 2 BANDSAW BLADES *PA*

  • Saint Louis, Missouri, United States
  • May 25th
RNGN-45 T1 / RNGN120700T T01 WG300 Ceramic Inserts

RNGN-45 T1 / RNGN120700T T01 WG300 Ceramic Inserts

  • Windsor, Connecticut, United States
  • May 26th
Ceratip TC-30 Ceramic inserts

Ceratip TC-30 Ceramic inserts

  • Chicago, Illinois, United States
  • May 26th
One Lot of Three Dumont Keyway Broaches 3/16 B H.S. (Inv.35457)

One Lot of Three Dumont Keyway Broaches 3/16 B H.S. (Inv.35457)

  • Portland, Connecticut, United States
  • May 31st
Pair of Dumont Keyway Broaches 3/16 Inch (Inv.35453)

Pair of Dumont Keyway Broaches 3/16 Inch (Inv.35453)

  • Portland, Connecticut, United States
  • May 31st
EnPoint? High-precision Carbide CNC Engraving Machine Bits Generic 3.175mm 1/8&#034;

EnPoint? High-precision Carbide CNC Engraving Machine Bits Generic 3.175mm 1/8"

  • USA, United States
  • Jun 5th
53 IMCO TOOL SQUARE CUTTER BIT E-6 C2 IC20 80204-B94.5 MACHINE METAL SHOP NEW

53 IMCO TOOL SQUARE CUTTER BIT E-6 C2 IC20 80204-B94.5 MACHINE METAL SHOP NEW

  • Westerville, Ohio, United States
  • Jun 5th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies