HUDSON 18-TON HYDRAULIC CLICKER PRESS made Italy, US $2,950.00 – Picture 0

HUDSON 18-TON HYDRAULIC CLICKER PRESS made Italy, US $2,950.00 – Picture 1

HUDSON 18-TON HYDRAULIC CLICKER PRESS made Italy, US $2,950.00 – Picture 2

HUDSON 18-TON HYDRAULIC CLICKER PRESS made Italy, US $2,950.00 – Picture 3

HUDSON 18-TON HYDRAULIC CLICKER PRESS made Italy, US $2,950.00 – Picture 4

HUDSON 18-TON HYDRAULIC CLICKER PRESS made Italy, US $2,950.00 – Picture 5

Hudson 18-ton Hydraulic Clicker Press Made Italy

US $2,950.00

Chatsworth, California, United States
Jan 30th

Open on mobile:
QR code

template HUDSON SHOE MACHINERY CO. model F36 18 TON HYDRAULIC CLICKER PRESS made in Italy ITEM SOLD AS PICTURED Made by Hudson Shoe Machinery Company in Massachusetts, USA Good working condition. Previously used for making rubber molds. SPECIFICATIONS Cutting Pressure 18 tons Table Size 17 3/4 " x 36" Beating Cutting Plate 14 1/4 " x 24" Regulated Stroke 0.2" to 2.375" Maximum Daylight 3" Motor 2HP Electrical Power 220 Volt, 3 Phase Dimensions 52" x 36" x 67"high Weight 2,500 Lbs. *Specifications subject to verification INSPECTION NOTES: As with any piece of equipment, new or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item's cosmetic condition. This item is sold as pictured. Shipping Shipping is the responsibility of the buyer; however, Machinery Exchange has a large network of freight carriers to help you find the best price. If you would like a freight quote for this item please click "Contact Seller" or “Ask Question” at the bottom of the listing and provide us with your city, state and zip code. Or contact us via telephone at (818) 718-6734 Machines are attached to a skid for and covered in protective cosmoline coating for shipment. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Tooling: Below are directions on how you can calculate shipping for items under 150lbs. That does not qualify for USPS Flat Rate. Pick up/Will Call: All our items are available for pick up Monday thru Friday from 9am to 4:30. Arrangements can be made for Saturday pick up. We do not charge loading fees for loading machines or tooling unless we have to bring in special equipment or call a mover. Note: Most of our listings are marked Freight shipping. We ship via FEDEX and USPS for item(s) 150lbs or lighter. The cost of shipping will be sent via invoice. We encourage all customers to log into the FedEx website to calculate shipping. Listed on every item are the directions and information needed to do so. ENCLOSED FREIGHT- Items over 100 lbs. less than 3000 lbs. will be sent via LTL Freight via enclosed truck. For an enclosed freight quote please email us with: item #, name, zip code, and destination type [commercial or residential]. We forward your emails to a freight broker who networks with all the major freight companies to find you the best rate. We can act on your behalf for shipping quotation but shipping arrangement and charges are your responsibility. We will send you the freight broker's contact info to schedule pick up. Enclosed shipments require an item to be palletized and protected. The cost labor and materials to prepare an item for enclosed shipment is generally $50. This charge will be passed on to you as a packaging fee. We will load the item at no additional charge. In some cases, we will send an item under 1000 lbs. via open-bed freight if we feel enclosed shipment is not a suitable means of shipment. MACHINE DIMENSIONS: 60" x 48" x 70"H (inches) approximate. MACHINE WEIGHT: 2500 lbs. approximate. OPEN-BED FREIGHT- Items over 1000 lbs. less than 3000 lbs. will be sent via open-bed freight. Open-bed freight trucks allow the item to secured to the truck bed. For an open-bed freight quote please email us with: item #, name, zip code, and destination type [commercial or residential]. We forward your emails to a freight broker who networks with all the major freight companies to find you the best rate. We can act on your behalf for shipping quotation but shipping arrangement and charges are your responsibility. We will send you the freight broker's contact info to schedule pick up. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item's electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items are with-in our forklifts capacity and we will load them on to an open-bed freight truck at no charge. We may charge a rigging fee if we do not feel comfortable loading the item and contract machinery movers to load for us. This is usually the case with top-heavy items, such as grinding machines. MACHINE DIMENSIONS: 52" x 36" x 67"H (inches) approximate. MACHINE WEIGHT: 2500 lbs. approximate. Payment We accept Check, Credit Card, or PayPal. We accept all major credit cards except American Express. Payment is due within 5 days of purchase. Orders are not processed until they’re paid in full. Our invoice will include a subtotal of item(s) purchased, sales tax for in-state purchases [CA], and a rigging/packaging charge if applicable. Please wait for a complete invoice with estimated shipping price before sending payment. Machinery Exchange reserves the right to open an Unpaid Dispute against buyers who do not pay or contact us in regards to payment. Machinery Exchange reserves the right to re-list or re-sell a purchased item if we do not receive payment. Terms Listed Items- Items listed on eBay are available for immediate purchase through our showroom as they are advertised through various trade publications. This item is subject to prior sale. We reserve the right to end an auction early if the item sells through another outlet. We will not end an auction if it has less than eight hours remaining or the item reserve has been met. Machinery Turn-around Time - Your order is processed after it is paid for in full. Average turn-around time varies depending on the item you have purchased. Many factors come in to play when purchasing industrial equipment. Machines must be 'blocked' for shipment before they can be removed from our showroom and loaded on to a freight truck. We hire an outside technician to prepare the machine for shipment. Machinery movers may also be contracted to remove the machine from our showroom and load it on to a freight truck. Our turn-around time depends on the schedules of these outside sources. Generally an item can be ready to ship within five business days of purchase. Please contact us if you need detailed information on this items availability. We will do our best to expedite an order if you make the request prior to purchase. Refunds & Returns- As proud MDNA (Machinery Dealers National Association) members, we offer an exclusive thirty-day return privilege. If you are not satisfied with your purchase, simply send the item back in its original condition for a full refund. This return privilege is not a warranty. Option to repair at dealer's discretion. Machinery Exchange is not responsible for third party charges, such as: rigging, shipping, installation, and service work. All third-party charges are not refundable. *RETURN PRIVILEGE DOES NOT APPLY TO CONSIGNMENT OR DISCOUNTED ITEMS. Damages- We go above and beyond to assure your item arrives safely but there have been cases when an item still gets damaged during transit. We will not be held accountable for an item damaged during transit unless it was packaged improperly. Always insure your shipment when making shipping arrangements. This allows you to make a claim against the shipping company for the amount of loss. If an issue arises during transit we will do our best to represent you as our customer and resolve the issue. Ultimately shipping is a contract between you and another company. Machinery Exchange is cannot be held responsible for freight costs, transit times, etc. Feedback - eBay has advised sellers to use the feedback system as a tool to know customers are completely satisfied with their purchase. The final step of the transaction is leaving you positive feedback. Machinery Exchange goes to great lengths to make sure our customers are satisfied. If you feel we have earned anything less than a positive remark please contact us and we will resolve your issue as best we can. You are buying from a MDNA professional. We specialize in reliability, quality, and we back our equipment with a thirty day return privilege to assure your satisfaction. So, Bid With Confidence! Contact Info- Feel free to contact us for more information regarding our eBay listings. You can contact us through eBay's email system. Contact us through eBay first if you would like to email us direct, otherwise your email will not get pass our spam guard. Call us Monday through Friday 9am-5pm PST (818) 718-6734 Our address is 20933 Plummer Street Chatsworth, CA 91311 NEED FINANCING? GET APPROVED INSTANTLY ONLINE! Direct Capital provides equipment financing for our customers across the U.S. for both new and used equipment. Click the Direct Capital logo on the left to be redirected to the Equipment Financing Center. Jason Adler and Casey Goodell are our dedicated Finance Managers. Speak to them directly to find the program that best fits your business. Jason Adler (603) 433-9446 jadler@directcapital.com Casey Goodell (603) 766-9365 cgoodell@directcapital.com

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	Hudson Shoe Machinery Co.
Country/Region of Manufacture	Italy
Model	F36
Serial No.	73435