+ Post new Ad
Huge lot scrap Carbide or reuse, tool steel, machinest tools, parts 9 lbs, US $240 – Picture 0
Huge lot scrap Carbide or reuse, tool steel, machinest tools, parts 9 lbs, US $240 – Picture 1
Huge lot scrap Carbide or reuse, tool steel, machinest tools, parts 9 lbs, US $240 – Picture 0
Huge lot scrap Carbide or reuse, tool steel, machinest tools, parts 9 lbs, US $240 – Picture 1

Huge Lot Scrap Carbide Or Reuse, Tool Steel, Machinest Tools, Parts 9 Lbs

US $240

  • Elmira, Michigan, United States
  • Oct 23rd
Open on mobile:
QR code
This is a huge lot, there are about 70 pieces weighing about 9 lbs, I dont know too much about this stuff, i know some of it is carbide, there are many diffferent pieces, i dont know if it is all usable, some pieces might be broken or damaged, and some pieces might be usable, please see pictures and discription before bidding and please feel free to ask any questions and i will do my best to answer, i dont know what the total value of this lot is so i am just letting it go for whatever i get for it, some stuff has some surface rust, some stuff appears to be in newer condition and never used and some stuff does appear to have bean used before, i know some of this stuff cost quite a bit to buy it knew, so hopefully someone get a pretty good deal and either use it or resell it, so, if you have any question please just feel free to ask and thanks for bidding.

Directions

Similar products from Solid Carbide Drill Bits

2 New USA #41 Solid Carbide Drill Bits

2 New USA #41 Solid Carbide Drill Bits

  • Coldwater, Ohio, United States
  • Oct 25th
Sturtevant Richmont 4SDR-150 1/2" Ratchet Head Torque Wrench 30-150 LBFT (Z 2)

Sturtevant Richmont 4SDR-150 1/2" Ratchet Head Torque Wrench 30-150 LBFT (Z 2)

  • Dallas, Texas, United States
  • Oct 25th
Lot 2x Classic Carbide Tool Corporation USA Drill Bits C2X25X90CHMF C2X30X90CHMF

Lot 2x Classic Carbide Tool Corporation USA Drill Bits C2X25X90CHMF C2X30X90CHMF

  • Kingman, Arizona, United States
  • Oct 24th
10 Piece Solid Carbide Micro Drill Bit Set Jewelry model railroad crafts tools

10 Piece Solid Carbide Micro Drill Bit Set Jewelry model railroad crafts tools

  • Saugatuck, Michigan, United States
  • Oct 24th
MITSUBISHI-MWS04375LB-4375-034-Dia-Coolant-Through-Carbide Drill .4375 Diameter

MITSUBISHI-MWS04375LB-4375-034-Dia-Coolant-Through-Carbide Drill .4375 Diameter

  • Des Moines, Iowa, United States
  • Oct 24th
SMALL SOLID CARBIDE DRILLS lot of 3/ Regal Cutting Tool

SMALL SOLID CARBIDE DRILLS lot of 3/ Regal Cutting Tool

  • Lake Mills, Wisconsin, United States
  • Oct 24th
(lot of 5) 5/16 carbide end mill

(lot of 5) 5/16 carbide end mill

  • New Berlin, Wisconsin, United States
  • Oct 24th
Solid Carbide Drill Bits

Solid Carbide Drill Bits

  • Fairmont, West Virginia, United States
  • Oct 24th
120 Pieces New Old Stock #63 Wire Size, Carbide Twist Drill .062 cut, 1.5" OAL

120 Pieces New Old Stock #63 Wire Size, Carbide Twist Drill .062 cut, 1.5" OAL

  • Ballston Spa, New York, United States
  • Oct 24th
Huge lot scrap Carbide or reuse, tool steel, machinest tools, parts 13 lbs

Huge lot scrap Carbide or reuse, tool steel, machinest tools, parts 13 lbs

  • Elmira, Michigan, United States
  • Oct 23rd
New Sandvik Carbide Coolant Drill R840-0940-50-A1A 1220 Diameter 9.4mm

New Sandvik Carbide Coolant Drill R840-0940-50-A1A 1220 Diameter 9.4mm

  • Wichita, Kansas, United States
  • Oct 23rd
NEW Kennametal 5/8" Coolant thru Drill 2F Solid Carbide. .625" 6.5" OAL.

NEW Kennametal 5/8" Coolant thru Drill 2F Solid Carbide. .625" 6.5" OAL.

  • Enfield, New Hampshire, United States
  • Oct 23rd
27/64" x 5/16-24 THREADED END SOLID CARBIDE DRILL FOR MULTI SPINDLE PRESS HEAD

27/64" x 5/16-24 THREADED END SOLID CARBIDE DRILL FOR MULTI SPINDLE PRESS HEAD

  • Chino, California, United States
  • Oct 23rd
Metal Removal 1/4 carbide 5xD TiALN Coolant Thru drill

Metal Removal 1/4 carbide 5xD TiALN Coolant Thru drill

  • Romeoville, Illinois, United States
  • Oct 23rd
16.15 Lbs Of Scrap Carbide Mix (Drills, Mills, Inserts)

16.15 Lbs Of Scrap Carbide Mix (Drills, Mills, Inserts)

  • Cookeville, Tennessee, United States
  • Oct 23rd
LOT OF 50 CARBIDE CIRCUITBOARDNDRILL BITS BY MAGATOOL 1.35 on collar .053mm

LOT OF 50 CARBIDE CIRCUITBOARDNDRILL BITS BY MAGATOOL 1.35 on collar .053mm

  • Grass Valley, California, United States
  • Oct 22nd
LOT OF 50 CARBIDE CIRCUIT BOARD DRILL BITS #62 .0380 BY UNION TOOL

LOT OF 50 CARBIDE CIRCUIT BOARD DRILL BITS #62 .0380 BY UNION TOOL

  • Grass Valley, California, United States
  • Oct 22nd
Belknap 1" Drive Ratchet Head 60" Length Reversible Torque Wrench 450 (Z 5 )

Belknap 1" Drive Ratchet Head 60" Length Reversible Torque Wrench 450 (Z 5 )

  • Dallas, Texas, United States
  • Oct 22nd
*ORIGINAL* YG1 SET 3pcs DREAM DRILLS-6mm-8mm-8,5mm, TiAlN

*ORIGINAL* YG1 SET 3pcs DREAM DRILLS-6mm-8mm-8,5mm, TiAlN

  • Trencin, Slovakia
  • Oct 22nd
1x1x1-1/2x4 Solid Carbide 4 Flute Finish End Mill "Refurbished" Used

1x1x1-1/2x4 Solid Carbide 4 Flute Finish End Mill "Refurbished" Used

  • West Chazy, New York, United States
  • Oct 22nd

People who viewed this item also vieved

new stellram insert drill with 5 new inserts.3/4" shank.coolant thru.

new stellram insert drill with 5 new inserts.3/4" shank.coolant thru.

  • Woburn, Massachusetts, United States
  • Jan 30th
new aloris yes insert drill with 1 new 1" tip & countersink ring.1.259 shank.

new aloris yes insert drill with 1 new 1" tip & countersink ring.1.259 shank.

  • Woburn, Massachusetts, United States
  • Jan 30th
new guhring large insert drill.coolant thru.1.358 to 1.476. 1 1/4"shank.

new guhring large insert drill.coolant thru.1.358 to 1.476. 1 1/4"shank.

  • Woburn, Massachusetts, United States
  • Jan 30th
HARTNER 1.5mm Nr1341 HSSCo 30D Extra-Long Drills 10psc (~ 1/16) .0591 1.5 mm

HARTNER 1.5mm Nr1341 HSSCo 30D Extra-Long Drills 10psc (~ 1/16) .0591 1.5 mm

  • United States
  • Jan 30th
(#4275C) New Machinist USA Made 11mm Straight Shank Taper Length Style Drill

(#4275C) New Machinist USA Made 11mm Straight Shank Taper Length Style Drill

  • Warren, Michigan, United States
  • Jan 30th
(#4291C) Resharpened Machinist USA Made 39/64 Inch Straight Shank Drill

(#4291C) Resharpened Machinist USA Made 39/64 Inch Straight Shank Drill

  • Warren, Michigan, United States
  • Jan 30th
CLE-Line, C22743, 23/64", HSS Jobber Length Drill Bit - 6 each

CLE-Line, C22743, 23/64", HSS Jobber Length Drill Bit - 6 each

  • Chillicothe, Missouri, United States
  • Jan 30th
NEW Magnetic Drill MD 45 Mag Drill with Drill Chuck!!

NEW Magnetic Drill MD 45 Mag Drill with Drill Chuck!!

  • Seattle, Washington, United States
  • Jan 30th
5/32" (.1563") HSS Jobber Length Drills - New USA Made

5/32" (.1563") HSS Jobber Length Drills - New USA Made

  • Arlington, Texas, United States
  • Jan 30th
35/64 Jobber Length HSS Drill GP Black Oxide USA Brand 2pcs

35/64 Jobber Length HSS Drill GP Black Oxide USA Brand 2pcs

  • Trenton, Michigan, United States
  • Jan 30th
3/32 Jobber Length HSS Drill PB Bright Cleveland Brand 10pcs

3/32 Jobber Length HSS Drill PB Bright Cleveland Brand 10pcs

  • Trenton, Michigan, United States
  • Jan 30th
1.077 Dia 8FL Right Hand Barber Colman Tungsten Carbide Tipped Reamer USA 1pc

1.077 Dia 8FL Right Hand Barber Colman Tungsten Carbide Tipped Reamer USA 1pc

  • Trenton, Michigan, United States
  • Jan 30th
Packing 50 PCS DRILLS D 0,5 mm for carbon and alloyed steels.

Packing 50 PCS DRILLS D 0,5 mm for carbon and alloyed steels.

  • Pavlograd, Dnepropetrovsk, Ukraine
  • Jan 30th
Packing 50 PCS DRILLS D 0,26 mm for carbon and alloyed steels.

Packing 50 PCS DRILLS D 0,26 mm for carbon and alloyed steels.

  • Pavlograd, Dnepropetrovsk, Ukraine
  • Jan 30th
41/64" x 8 " STRAIGHT SHANK DRILL BIT lathe mill drilling CLE-FORGE thru coolant

41/64" x 8 " STRAIGHT SHANK DRILL BIT lathe mill drilling CLE-FORGE thru coolant

  • Rushville, Indiana, United States
  • Jan 30th
drill bits

drill bits

  • Berlin, Connecticut, United States
  • Jan 30th
pneumatic tapping machine arm and quick/rapid change tapping collet M3-M12 USj

pneumatic tapping machine arm and quick/rapid change tapping collet M3-M12 USj

  • CN,CN, China
  • Jan 30th
Chicago-Latrobe 51347, 7/16", 2MT, HSS Taper Shank Drill Bit ((#D3))

Chicago-Latrobe 51347, 7/16", 2MT, HSS Taper Shank Drill Bit ((#D3))

  • Green Bay, Wisconsin, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies