Hydraforce Sv08-22m 4303612 Poppet-type, 2-way, Normally Closed, Manual Override

US $640

  • Kansas City, Missouri, United States
  • Jun 4th
Valve: SV08-22M  Solenoid Actuator: 4303612 DESCRIPTION A solenoid-operated, 2-way, normally closed, piloted poppet-type, screw-in hydraulic cartridge valve, intended to act as a blocking or load-holding device for low flow circuits. OPERATION When de-energized, the SV08-22 acts as a check valve, allowing flow from 1 to 2, while blocking flow from 2 to 1. When energized, the needle point lifts to allow bi-directional flow. Operation of Manual Override Option: To override, push button in, twist counterclockwise 180°, and release. In this position, the valve will remain open. To return to normal operation, push button in, twist clockwise 180°, and release. Override will be detented in this position. FEATURES • Continuous-duty rated coil. • Hardened seat for long life and low leakage. • Optional coil voltages and terminations. • Cartridges are voltage interchangeable. • Unitized, molded coil design. • Manual override option. • Optional waterproof E-Coils rated up to IP69K. • Industry common cavity. • Compact size. RATINGS Operating Pressure: 207 bar (3000 psi) Flow: Up to 26.5 lpm (7 gpm) Internal Leakage: 0.15 cc/minute (3 drops/minute) max. at 207 bar (3000 psi) Temperature: -40 to 100 °C (-40 to 212 °F) with standard Buna seals Coil Duty Rating: Continuous from 85% to 115% of nominal voltage Initial Coil Current Draw at 20 °C: Standard Coil: 1.2 amps at 12 Vdc;  0.13 amps at 115 Vac (full wave rectified).  E-Coil: 1.4 amps at 12 Vdc; 0.7 amps at 24 Vdc Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi) Filtration: See page 9.010.1 Fluids: Mineral-based or synthetics with lubricating properties at viscosities of  7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1 Installation: No restrictions; See page 9.020.1 Cavity: VC08-2; See page 9.108.1_2w Cavity Tool: CT08-2xx; See page 8.600.1 Seal Kit: SK08-2x-T; See page 8.650.1 Coil Nut: Part No. 7004400 Inv Loc: FSA3

Directions

Similar products from Hydraulic Flaps

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies