+ Post new Ad
Hydramax 5ST for 4inch Vise Jaw for Kurt CNC Vise Haas ,Mori Seki , CNC Mill, US $412.50 – Picture 0
Hydramax 5ST for 4inch Vise Jaw for Kurt CNC Vise Haas ,Mori Seki , CNC Mill, US $412.50 – Picture 0

Hydramax 5st For 4inch Vise Jaw For Kurt Cnc Vise Haas ,mori Seki , Cnc Mill

US $412.50

  • Monmouth, Oregon, United States
  • Jan 30th
Open on mobile:
QR code
The Hydramax Workholding System The Hydramax Workholding System is designed to allow multiple parts, with variations in size to be secured in a Kurt vise simultaneously. Problems usually associated with attempting to hold multiple parts in one vise are virtually eliminated. Save time and money without the hassles of broken cutters, scraped parts, or damaged fixtures. Also, fragile parts can be held securely, without crushing pressure. The system includes two jaws both equipped with our FastBack washer mounting plates. The solid jaw is replaced by a simple machinable aluminum soft jaw, while the moveable jaw is replaced by the Hydramax jaw. The Hydramax jaw incorporates several independently acting clamping pistons. These pistons compensate for variations in the parts being held. The self-contained hydraulic chamber within the jaw equalizes the pressure of the individual pistons, allowing the jaw to adapt to the parts being held for machining. Multiple systems are available with variations in the size and number of hydraulic pistons within the self-contained jaw unit.

Directions

Similar products from Fittings & Plates

MACHINIST/MINI LATHE Small Face Plate & Dog 3" with 9/16 X16 Threads

MACHINIST/MINI LATHE Small Face Plate & Dog 3" with 9/16 X16 Threads

  • Shasta Lake, California, United States
  • Jan 30th
SPI/Suburban Tool 6x6 PERMANENT MAGNETIC SINE PLATE Model #MSP-66-S1

SPI/Suburban Tool 6x6 PERMANENT MAGNETIC SINE PLATE Model #MSP-66-S1

  • Kernersville, North Carolina, United States
  • Jan 30th
Demmeler Bluco angles, pair left and right hand

Demmeler Bluco angles, pair left and right hand

  • Tempe, Arizona, United States
  • Jan 30th
"All Tool" Rotadex Eastern Machine & Tool Co.

"All Tool" Rotadex Eastern Machine & Tool Co.

  • Lexington, North Carolina, United States
  • Jan 30th
Brown and Sharpe 5” SINE BAR, MACHINIST TOOLS

Brown and Sharpe 5” SINE BAR, MACHINIST TOOLS

  • Saint Louis, Missouri, United States
  • Jan 30th
Carbide Tipped Dead Center Morse Taper #2 Machinist Tool Factory Direct

Carbide Tipped Dead Center Morse Taper #2 Machinist Tool Factory Direct

  • Ontario, California, United States
  • Jan 30th
50" x 26" x 6" T-Slotted Table Cast Iron Steel Layout Welding _ A15016 _ A15017

50" x 26" x 6" T-Slotted Table Cast Iron Steel Layout Welding _ A15016 _ A15017

  • Grand Rapids, Michigan, United States
  • Jan 30th
Taft Peirce 6 x 6 Inch Sine Angle Plate (Inv.29017)

Taft Peirce 6 x 6 Inch Sine Angle Plate (Inv.29017)

  • Portland, Connecticut, United States
  • Jan 30th
DEAL! HARDINGE SIX STATION INTERCHANGEABLE TURRET TOP PLATE - 3 BOLT MOUNT

DEAL! HARDINGE SIX STATION INTERCHANGEABLE TURRET TOP PLATE - 3 BOLT MOUNT

  • United States
  • Jan 30th
Hydramax 7ST Vise Jaw for Kurt CNC Vise Haas ,Mori Seki , Fadal CNC Mill -

Hydramax 7ST Vise Jaw for Kurt CNC Vise Haas ,Mori Seki , Fadal CNC Mill -

  • Monmouth, Oregon, United States
  • Jan 30th
X-Pander, Multiple ID Parts Holder Vise Jaw for Kurt CNC Vise Haas ,Mori Seki ,

X-Pander, Multiple ID Parts Holder Vise Jaw for Kurt CNC Vise Haas ,Mori Seki ,

  • Monmouth, Oregon, United States
  • Jan 30th
MorseTaper Drill Sleeve MT4 Shank & MT3 Hole MT Drill Sleeve Machinist Tool

MorseTaper Drill Sleeve MT4 Shank & MT3 Hole MT Drill Sleeve Machinist Tool

  • Ontario, California, United States
  • Jan 30th
Collet ER40 Precision ER40 Spring Collet 1/16-5/8" 15PC & MT3 Shank

Collet ER40 Precision ER40 Spring Collet 1/16-5/8" 15PC & MT3 Shank

  • Ontario, California, United States
  • Jan 30th
Quick ChangeTool Post Holders13-18" Piston Type Quick ChangeTool Post Machinist

Quick ChangeTool Post Holders13-18" Piston Type Quick ChangeTool Post Machinist

  • Ontario, California, United States
  • Jan 30th
SUPERIOR SPIN-DEX 5C COLLET INDEX FIXTURE

SUPERIOR SPIN-DEX 5C COLLET INDEX FIXTURE

  • Baltimore, Maryland, United States
  • Jan 30th
Monarch 7" x 8" x 12" 90° Ground Slotted Angle Plate

Monarch 7" x 8" x 12" 90° Ground Slotted Angle Plate

  • Chicago, Illinois, United States
  • Jan 30th
USED ERON NO. 24 ANGLE PLATE 5 X 5 X 5"

USED ERON NO. 24 ANGLE PLATE 5 X 5 X 5"

  • San Bernardino, California, United States
  • Jan 30th
47"x23"x5" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld

47"x23"x5" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld

  • Grand Rapids, Michigan, United States
  • Jan 30th
TTC Swivel Tilting Angle Plate Size : 8" x 10" Table T-Slot:1/2" Height : 6-1/2"

TTC Swivel Tilting Angle Plate Size : 8" x 10" Table T-Slot:1/2" Height : 6-1/2"

  • Flushing, New York, United States
  • Jan 30th
TTC Precision Sine Plate CENTER DISTANCE OF ROLLS: 5.000" within .0002"

TTC Precision Sine Plate CENTER DISTANCE OF ROLLS: 5.000" within .0002"

  • Flushing, New York, United States
  • Jan 30th

People who viewed this item also vieved

HARDINGE COLLETS FOR LATHES, MILLS, GRINDERS & FIXTURES CATALOG 1995

HARDINGE COLLETS FOR LATHES, MILLS, GRINDERS & FIXTURES CATALOG 1995

  • Johnstown, Pennsylvania, United States
  • Mar 8th
MORRIS SDH28-PLUG TOOLHOLDER ADAPTER QUICK CHANGE

MORRIS SDH28-PLUG TOOLHOLDER ADAPTER QUICK CHANGE

  • United States
  • Mar 8th
Hardinge, B&S Taper Collets

Hardinge, B&S Taper Collets

  • Memphis, Tennessee, United States
  • Mar 8th
3 14" KNUVISE P-1200 P 200X8 Vise Clamp Sheet Metal Fabricating Aircraft tool

3 14" KNUVISE P-1200 P 200X8 Vise Clamp Sheet Metal Fabricating Aircraft tool

  • Long Beach, California, United States
  • Mar 12th
Bessey No. GRZ 20 Paralllel Grips Clamps of Two hand tools metalworking #

Bessey No. GRZ 20 Paralllel Grips Clamps of Two hand tools metalworking #

  • United States
  • Mar 12th
Parallel Clamps, (2) Machinist / Tool Maker Parallel Clamps, Open to 2-1/4 & 3"

Parallel Clamps, (2) Machinist / Tool Maker Parallel Clamps, Open to 2-1/4 & 3"

  • Saunderstown, Rhode Island, United States
  • Mar 12th
Heinrich Air Vise Single Acting Model 44

Heinrich Air Vise Single Acting Model 44

  • Jamestown, New York, United States
  • Mar 12th
Prismatic Vise Jaw For 4" Cross Slide Vise

Prismatic Vise Jaw For 4" Cross Slide Vise

  • Traer, Iowa, United States
  • Mar 12th
Craftsman Clausing 4 Jaw Chuck 1111708 8tpi x 1-1/2" Used

Craftsman Clausing 4 Jaw Chuck 1111708 8tpi x 1-1/2" Used

  • Tacoma, Washington, United States
  • Mar 25th
6inch Metal Chuck 4 1/4" 3-Jaw with Back Plate Lathe Mill

6inch Metal Chuck 4 1/4" 3-Jaw with Back Plate Lathe Mill

  • Vancouver, Washington, United States
  • Mar 25th
Jacobs Ball Bearing Super Chuck 14N 0-1/2" with AO303 Arbor Machinist Tools

Jacobs Ball Bearing Super Chuck 14N 0-1/2" with AO303 Arbor Machinist Tools

  • Garden Grove, California, United States
  • Mar 25th
Machine Vice (Myford)

Machine Vice (Myford)

  • Greater West Sydney NSW, Australia
  • Mar 25th
NEW IN BOX DEAD CENTER J-10 TAPER, CARBIDE TIPPED JARNO TAPER

NEW IN BOX DEAD CENTER J-10 TAPER, CARBIDE TIPPED JARNO TAPER

  • West Point, California, United States
  • Jun 3rd
Royal Products Standard Dead Center Morse Taper 5, 8 1/2" Long

Royal Products Standard Dead Center Morse Taper 5, 8 1/2" Long

  • Glendale, California, United States
  • Jun 4th
NICE ROYAL 3MT CNC LIVE CENTER

NICE ROYAL 3MT CNC LIVE CENTER

  • El Monte, California, United States
  • Jun 4th
0 - 12" Double Beam Height Gage with Counter

0 - 12" Double Beam Height Gage with Counter

  • South Hackensack, New Jersey, United States
  • May 28th
0 - 24" / 0 - 600mm Vernier Height Gages

0 - 24" / 0 - 600mm Vernier Height Gages

  • South Hackensack, New Jersey, United States
  • May 28th
0 - 18" / 0 - 450mm Vernier Height Gages

0 - 18" / 0 - 450mm Vernier Height Gages

  • South Hackensack, New Jersey, United States
  • May 28th
HAAS S5C HA5C 14 PIN INDEXER AND RED SERVO CONTROLLER

HAAS S5C HA5C 14 PIN INDEXER AND RED SERVO CONTROLLER

  • Lowell, Massachusetts, United States
  • Jun 2nd
Yuasa CNC Rotary Indexer with Programmable Controller

Yuasa CNC Rotary Indexer with Programmable Controller

  • Lombard, Illinois, United States
  • Jun 2nd
NIKKEN KOSAKUSHO CNC-400 VF 16" 4th-AXIS HORIZONTAL/VERTICAL POWER ROTARY TABLE

NIKKEN KOSAKUSHO CNC-400 VF 16" 4th-AXIS HORIZONTAL/VERTICAL POWER ROTARY TABLE

  • Buffalo, New York, United States
  • Jun 2nd
L.S. Starrett No. 278 v-blocks and clamps

L.S. Starrett No. 278 v-blocks and clamps

  • Rochester, New York, United States
  • Jun 2nd
Hertel - 3/4 Inch Diameter, 1-1/2 Inch Length of Cut, 4 Flutes, End Mill "NICE"

Hertel - 3/4 Inch Diameter, 1-1/2 Inch Length of Cut, 4 Flutes, End Mill "NICE"

  • Portland, Oregon, United States
  • Jun 2nd
Machinist V Block, APPROX. 4" x 2-3/4" x 2-3/4"

Machinist V Block, APPROX. 4" x 2-3/4" x 2-3/4"

  • Clinton Township, Michigan, United States
  • Jun 2nd
JW Winco A40634 Black Finish Steel Adjustable Pin-Type Face Spanner for Round

JW Winco A40634 Black Finish Steel Adjustable Pin-Type Face Spanner for Round

  • USA, United States
  • Jun 7th
JW Winco A40626 Black Finish Steel Adjustable Pin-Type Face Spanner for Round

JW Winco A40626 Black Finish Steel Adjustable Pin-Type Face Spanner for Round

  • USA, United States
  • Jun 7th
"Bamboo Single Pointed Needles 13""-Size 1.5/2.5mm"

"Bamboo Single Pointed Needles 13""-Size 1.5/2.5mm"

  • Hickory Hills, Illinois, United States
  • Jun 7th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies