+ Post new Ad
Hypertherm Powermax 45 Plasma Cutter with 20' Foot Lead & gun ~ minty conditon!!, US $2822 – Picture 0
Hypertherm Powermax 45 Plasma Cutter with 20' Foot Lead & gun ~ minty conditon!!, US $2822 – Picture 0

Hypertherm Powermax 45 Plasma Cutter With 20' Foot Lead & Gun ~ Minty Conditon!!

US $2822

  • Denver, Colorado, United States
  • Jun 13th
Open on mobile:
QR code
UP FOR YOUR CONSIDERATION >>> hypertherm powermax 45 hand system plasma cutter with 20' lead & With 45 amps of cutting power and Hypertherm torch technology it enables easy cutting of 1/2" (12mm) thick metal and has a severance capacity of 1" (25mm). The system comes with a hand torch and 20' work lead. ~ EXCELLENT PRE-OWNED CONDITION & USED 1 MONTH ONLY ON AN INDOOR PROJECT! ~ ABSOLUTLY CLEAN & VERY MUCH CARED FOR! ~ PLEASE REVIEW THE PHOTO'S & FEEL FREE TO ASK ANY QUESTION'S! ~ LOCAL PICK-UP IS OK! ~ THANKS FOR LOOKING & FOR YOUR INTEREST!Spend less time on grinding and edge preparation due to superior cut and gouge quality Patented drag-cutting technology makes it easy to use - even for first time operators Small size and light weight provides exceptional portability for a 1/2" rated cutting system 200-240V single phase input voltage, 34/28A Specifications Input voltages (± 10%) CSA 200 – 240 V, 1-PH, 50-60 Hz 480 V, 3-PH, 50-60 Hz CE 230 V, 1-PH, 50-60 Hz 400 V, 3-PH, 50-60 Hz Input Current @ 5.95 kW CSA Input power cable length 3 m (10') Power supply type Inverter - IGBT 200/230 V, 1-PH, 34/28 A 480 V, 3-PH, 9 A CE 230 V, 1-PH, 30 A 380/400 V, 3-PH, 10.5/10 A Output current 20 - 45 A Rated output voltage 132 VDC Duty cycle @ 40°C (104°F) CSA 50% @ 45 A, 200 – 240 V, 1-PH 60% @ 41 A, 200 – 240 V, 1-PH 100% @ 32 A, 200 – 240 V, 1-PH CE 50% @ 45 A, 230 V, 1-PH 60% @ 41 A, 230 V, 1-PH 100% @ 32 A, 230 V, 1-PH CE 50% @ 45 A, 380/400 V, 3-PH 60% @ 41 A, 380/400 V, 3-PH 100% @ 32 A, 380/400 V, 3-PH Open circuit voltage (OCV) 275 VDC Dimensions with handles 426 mm (16.75") D; 172 mm (6.75") W; 348 mm (13.7") H Weight with 6.1 m (20') torch CSA 17 kg (37 lbs) CE 16 kg (35 lbs) Gas Supply Clean, dry, oil-free air or nitrogen Recommended gas inlet flow rate / pressure Cutting: 170 l/min (360 scfh; 6 scfm) @ 80 psi (5.5 bar) Gouging: 360 scfh; 170 l/min (6 scfm) @ 60 psi (4.1 bar) Input power cable length 3 m (10') Power supply type Inverter - IGBT

Directions

Similar products from Plasma Cutting Equipment

24pcs/set SG-55 AG-60 WSD-60P Plasma Cutter Cutting Torch Consumables Kit

24pcs/set SG-55 AG-60 WSD-60P Plasma Cutter Cutting Torch Consumables Kit

  • HK, Hong Kong
  • Jun 13th
2003 ALLTRA G14-10 HIGH DEFINITION PLASMA CUTTING SYSTEM, BURNY 10LCD PLUS

2003 ALLTRA G14-10 HIGH DEFINITION PLASMA CUTTING SYSTEM, BURNY 10LCD PLUS

  • Coffeyville, Kansas, United States
  • Jun 13th
MILLER SPECTRUM 1250MG MULTIPLE GAS DC PLASMA CUTTING SYSTEM

MILLER SPECTRUM 1250MG MULTIPLE GAS DC PLASMA CUTTING SYSTEM

  • Pfafftown, North Carolina, United States
  • Jun 13th
Thermal Dynamics Torch 50' Lead SL100 75203 O2B connection

Thermal Dynamics Torch 50' Lead SL100 75203 O2B connection

  • Dallas, Texas, United States
  • Jun 13th
Snap-on Inverter Plasma Cutter

Snap-on Inverter Plasma Cutter

  • Gregory, Michigan, United States
  • Jun 13th
Miller Spectrum Thunder 120v plasma cutter

Miller Spectrum Thunder 120v plasma cutter

  • Rancho Palos Verdes, California, United States
  • Jun 13th
HUGE LOT OF PROFAX WELDCRAFT BESTWELDS TIG MIG PARTS NOZZLES COLLETS DIFFUSERS

HUGE LOT OF PROFAX WELDCRAFT BESTWELDS TIG MIG PARTS NOZZLES COLLETS DIFFUSERS

  • Chicago, Illinois, United States
  • Jun 13th
Hypermax HYPERTHERM Kit: T100, T80, T60, RT Torch Lead Replacement 25' 128755

Hypermax HYPERTHERM Kit: T100, T80, T60, RT Torch Lead Replacement 25' 128755

  • North York, Ontario, Canada
  • Jun 13th
New Centricut C61-280 Shield, Ported, Hypertherm

New Centricut C61-280 Shield, Ported, Hypertherm

  • Cincinnati, Ohio, United States
  • Jun 13th
New Centricut C61-270 Retaining Ring, Hypertherm

New Centricut C61-270 Retaining Ring, Hypertherm

  • Cincinnati, Ohio, United States
  • Jun 13th
HYPERTHERM DEFLECTOR 1PCS. 220325. PMX1000/1250/1650/RT60/RT80. NEW.

HYPERTHERM DEFLECTOR 1PCS. 220325. PMX1000/1250/1650/RT60/RT80. NEW.

  • Salaspils, default, Latvia
  • Jun 13th
HYPERTHERM DEFLECTOR 1PCS. 220326. PMX600/800/900. NEW.

HYPERTHERM DEFLECTOR 1PCS. 220326. PMX600/800/900. NEW.

  • Salaspils, default, Latvia
  • Jun 13th
HYPERTHERM SWIRL RING 1PCS. 220479 . NEW.

HYPERTHERM SWIRL RING 1PCS. 220479 . NEW.

  • Salaspils, default, Latvia
  • Jun 13th
HYPERTHERM SHIELD 1PCS. 220817. PMX65/85/MRT. NEW.

HYPERTHERM SHIELD 1PCS. 220817. PMX65/85/MRT. NEW.

  • Salaspils, default, Latvia
  • Jun 13th
HYPERTHERM SHIELD 1PCS. 220674. POWERMAX45. NEW.

HYPERTHERM SHIELD 1PCS. 220674. POWERMAX45. NEW.

  • Salaspils, default, Latvia
  • Jun 13th
HYPERTHERM SHIELD 1PCS. 220818. PMX65/85/HRT/HRTs. NEW.

HYPERTHERM SHIELD 1PCS. 220818. PMX65/85/HRT/HRTs. NEW.

  • Salaspils, default, Latvia
  • Jun 13th
HYPERTHERM SWIRL RING 1PCS. 120576 MAX42/43/40CS/PMX600/800/900. NEW.

HYPERTHERM SWIRL RING 1PCS. 120576 MAX42/43/40CS/PMX600/800/900. NEW.

  • Salaspils, default, Latvia
  • Jun 13th
HYPERTHERM SHIELD 1PCS. 120977. PMX1000/1250/1650/RT80. NEW.

HYPERTHERM SHIELD 1PCS. 120977. PMX1000/1250/1650/RT80. NEW.

  • Salaspils, default, Latvia
  • Jun 13th
50/60A SG-55 AG-60 Plasma Cutter Torch Tip Consumables 80pcs HOT

50/60A SG-55 AG-60 Plasma Cutter Torch Tip Consumables 80pcs HOT

  • HK, Hong Kong
  • Jun 13th
Thermal Dynamics type 8-7514 Tip

Thermal Dynamics type 8-7514 Tip

  • Elm City, North Carolina, United States
  • Jun 13th

People who viewed this item also vieved

victor cutting torch 21" Straight Cut Ct2000fc used Once Tested A1

victor cutting torch 21" Straight Cut Ct2000fc used Once Tested A1

  • United States
  • Jan 30th
ESAB BOARD ,SERVO FOR MAIN CONTROL CARD REBUILT 560987964

ESAB BOARD ,SERVO FOR MAIN CONTROL CARD REBUILT 560987964

  • Walcott, Iowa, United States
  • Jan 30th
Harris Cutting Torch Handle 71-3

Harris Cutting Torch Handle 71-3

  • Everett, Washington, United States
  • Jan 30th
Medium Duty Welding and Cutting Torch Kit Victor Style

Medium Duty Welding and Cutting Torch Kit Victor Style

  • Burnaby, British Columbia, Canada
  • Jan 30th
NEW PERTRONIX ELECTRONIC DISTRIBUTOR LINCOLN WELDER SA-200 SA-250 FITS F-163

NEW PERTRONIX ELECTRONIC DISTRIBUTOR LINCOLN WELDER SA-200 SA-250 FITS F-163

  • Dallas, Oregon, United States
  • Jan 30th
NEW LOT LINCOLN WELDER SA-200 SA 250 TOGGLE SWITCH AMP HEXSEAL & LEGEND PLATE

NEW LOT LINCOLN WELDER SA-200 SA 250 TOGGLE SWITCH AMP HEXSEAL & LEGEND PLATE

  • Dallas, Oregon, United States
  • Jan 30th
NEW LINCOLN SA 200 SA-250 GAS F-162 F163 12V ELECTRIC IDLER SOLENOID & BOOT KIT

NEW LINCOLN SA 200 SA-250 GAS F-162 F163 12V ELECTRIC IDLER SOLENOID & BOOT KIT

  • Dallas, Oregon, United States
  • Jan 30th
USA STAINLESS STEEL KNOBS OEM REPLICA LINCOLN WELDER SA-200 REDFACE SATIN X-MAS

USA STAINLESS STEEL KNOBS OEM REPLICA LINCOLN WELDER SA-200 REDFACE SATIN X-MAS

  • Dallas, Oregon, United States
  • Jan 30th
Lincoln Invertec STT II MIG Welder

Lincoln Invertec STT II MIG Welder

  • Traverse City, Michigan, United States
  • Jan 30th
miller HF 251 D-1 High frequency arc starter

miller HF 251 D-1 High frequency arc starter

  • Lakeland, Florida, United States
  • Jan 30th
Eastwood Replacement TIG 200 Welder Torch

Eastwood Replacement TIG 200 Welder Torch

  • Pottstown, Pennsylvania, United States
  • Jan 30th
EMHART SERVO STUD WELDER # PK650C

EMHART SERVO STUD WELDER # PK650C

  • Richfield, Ohio, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies