+ Post new Ad
ICS 695F4 Gas Powered Chain Saw (Powerhead Only), US $1,699.00 – Picture 0
ICS 695F4 Gas Powered Chain Saw (Powerhead Only), US $1,699.00 – Picture 0

Ics 695f4 Gas Powered Chain Saw (powerhead Only)

US $1,699.00

  • United States
  • Jan 31st
Open on mobile:
QR code
695F4 Utility Gas Powered Chain Saw (Powerhead Only) Over 20 years of ICS product innovation and experience culminating in the latest addition to our gas saw family. Everything that makes chain saws the preferable method in cutting concrete, stone, and masonry wrapped in a hungry, power filled package called the 695GC and the 695F4. All the great features from past ICS chain saws plus a few new innovations to make your day go a little easier. Deep, straight cuts and square corners with ease of use and dependable performance to match. If cutting concrete, stone, masonry or ductile iron pipe is your game – the ICS 695GC and 695F4  are your GAME CHANGERS.   FEATURES & BENEFITS  • Use on concrete, stone and masonry  • Square corners  • Narrow deep cutting up to 16 in. (40 cm)  • Small openings  • 94 cc gas powered engine  • Safe, no gyroscopic rotation   695F4 PRODUCT SPECIFICATIONS WEIGHT 21 lbs/9.6 kg (without bar and chain) BAR LENGTH Up to 16" (40 cm) ENGINE SPEED 9300 +/- 150 rpm max, 2700 rpm idle HORSEPOWER 6.4 @ 9000 rpm ENGINE TYPE 2-stroke, single cylinder, air cooled DISPLACEMENT 5.7 cu. inch (94cc) POWERHEAD DIMENSIONS 19"L x 14"H x 12"W  (48 cm x 36 cm x 30 cm) VIBRATION LEVEL 3.9/4.1 meters/sec2 (front/rear handle) WATER SUPPLY Minimum 20 psi (1.5 bar) FUEL MIX RATIO 25:1 (4%) fuel-to-oil FUEL CAPACITY 0.26 gal (1.0 liter)
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Make ICS 695F4 Gas Powered Chain Saw (Powerhead Only)
Type chain saw
Model ICS 695F4 Gas Powered Chain Saw (Powerhead Only)
Power Source Gasoline
MPN ICS 695F4 Gas Powered Chain Saw (Powerhead Only)
Max Blade Diameter 12''

Directions

Similar products from Concrete Cut-Off Saws

Stihl TS400 Cut-Off Saw OEM Support Foot - Replaces 4223-791-7600

Stihl TS400 Cut-Off Saw OEM Support Foot - Replaces 4223-791-7600

  • Pompano Beach, Florida, United States
  • Jan 31st
Stihl TS400 Cut-Off Saw OEM Handle Moulding - Replaces 4223-791-0600

Stihl TS400 Cut-Off Saw OEM Handle Moulding - Replaces 4223-791-0600

  • Pompano Beach, Florida, United States
  • Jan 31st
Hydrostress Diamond Rope/Wire Concrete Saw

Hydrostress Diamond Rope/Wire Concrete Saw

  • Harrisville, Rhode Island, United States
  • Jan 31st
Diesel Hydraulic Power Unit/Demis WS 32 Concrete Wall Saw/Hyd.Valve w/ Hoses

Diesel Hydraulic Power Unit/Demis WS 32 Concrete Wall Saw/Hyd.Valve w/ Hoses

  • Harrisville, Rhode Island, United States
  • Jan 31st
Stihl TS350, TS400, TS460 Cut-Off Saw Non-OEM Water Kit - Replaces 4201-007-1038

Stihl TS350, TS400, TS460 Cut-Off Saw Non-OEM Water Kit - Replaces 4201-007-1038

  • Pompano Beach, Florida, United States
  • Jan 31st
Stihl TS400 Concrete Cut-Off Saw Aftermarket Clutch - Replaces 1125-160-2005

Stihl TS400 Concrete Cut-Off Saw Aftermarket Clutch - Replaces 1125-160-2005

  • Pompano Beach, Florida, United States
  • Jan 31st
Stihl TS400 Concrete Cut-Off Saw Aftermarket Muffler - Replaces 4223-140-0601

Stihl TS400 Concrete Cut-Off Saw Aftermarket Muffler - Replaces 4223-140-0601

  • Pompano Beach, Florida, United States
  • Jan 31st
Stihl Cut-Off Saw Blade Adapter 5 Pack - Replaces 0000-708-4200

Stihl Cut-Off Saw Blade Adapter 5 Pack - Replaces 0000-708-4200

  • Pompano Beach, Florida, United States
  • Jan 31st
Bosch WSR6 Spark Plug 10 Pack for Cut-Off Saws - Replaces Stihl 1110-400-7005

Bosch WSR6 Spark Plug 10 Pack for Cut-Off Saws - Replaces Stihl 1110-400-7005

  • Pompano Beach, Florida, United States
  • Jan 31st
New Stihl Concrete Cut-Off Saw 140mm Thrust Washer 4205-708-3001

New Stihl Concrete Cut-Off Saw 140mm Thrust Washer 4205-708-3001

  • Rome, New York, United States
  • Jan 31st
ICS 695F4 16" Gas Powered Diamond Chain Saw Package with Guidebar & Chain

ICS 695F4 16" Gas Powered Diamond Chain Saw Package with Guidebar & Chain

  • United States
  • Jan 31st
Stihl TS410 TS420 Non-OEM Cylinder/Piston Overhaul Kit | Replaces 4238-020-1202

Stihl TS410 TS420 Non-OEM Cylinder/Piston Overhaul Kit | Replaces 4238-020-1202

  • Pompano Beach, Florida, United States
  • Jan 31st
ICS 695GC Gas Powered Diamond Utility Chain Saw (Powerhead Only)

ICS 695GC Gas Powered Diamond Utility Chain Saw (Powerhead Only)

  • United States
  • Jan 31st
Stihl TS410 TS420 Non-OEM Cylinder, Piston, Plug & Deco Valve - 4238-020-1202

Stihl TS410 TS420 Non-OEM Cylinder, Piston, Plug & Deco Valve - 4238-020-1202

  • Pompano Beach, Florida, United States
  • Jan 31st
Stihl TS410 TS420 Non-OEM Standard Cylinder/Piston Kit - Replaces 4238-020-1202

Stihl TS410 TS420 Non-OEM Standard Cylinder/Piston Kit - Replaces 4238-020-1202

  • Pompano Beach, Florida, United States
  • Jan 31st
Stihl TS410 & TS420 Cut-Off Saw Aftermarket Piston and Ring Set - 4238-030-2003

Stihl TS410 & TS420 Cut-Off Saw Aftermarket Piston and Ring Set - 4238-030-2003

  • Pompano Beach, Florida, United States
  • Jan 31st
Stihl TS410 & TS420 Cut-Off Saw OEM Crankcase Gasket Set | 4238-007-1003

Stihl TS410 & TS420 Cut-Off Saw OEM Crankcase Gasket Set | 4238-007-1003

  • Pompano Beach, Florida, United States
  • Jan 31st
Stihl TS410 & TS420 Aftermarket Starter Recoil Assembly | Replaces 4238-190-0300

Stihl TS410 & TS420 Aftermarket Starter Recoil Assembly | Replaces 4238-190-0300

  • Pompano Beach, Florida, United States
  • Jan 31st
Stihl TS410 & TS420 New Style Starter Pulley Rope Rotor | OEM 4238-190-1001

Stihl TS410 & TS420 New Style Starter Pulley Rope Rotor | OEM 4238-190-1001

  • Pompano Beach, Florida, United States
  • Jan 31st
Stihl TS410 & TS420 Aftermarket Old Style Starter Recoil Spring | 4238-190-0601

Stihl TS410 & TS420 Aftermarket Old Style Starter Recoil Spring | 4238-190-0601

  • Pompano Beach, Florida, United States
  • Jan 31st

People who viewed this item also vieved

DEWALT D180022 HOLE SAW 1 3/8"

DEWALT D180022 HOLE SAW 1 3/8"

  • Brownsville, Texas, United States
  • May 26th
Shadowline Cutter Toolpro

Shadowline Cutter Toolpro

  • Granite City, Illinois, United States
  • May 26th
Lenox Tools 1779771 4-1/4" x 1/4" Pilot Drill Bit for Hole Saw Arbors

Lenox Tools 1779771 4-1/4" x 1/4" Pilot Drill Bit for Hole Saw Arbors

  • Goodyear, Arizona, United States
  • May 26th
"Joe's Saw"_VINTAGE PAINTED SAW SIGN_owner of Joe's Diner, ONE OF A KIND

"Joe's Saw"_VINTAGE PAINTED SAW SIGN_owner of Joe's Diner, ONE OF A KIND

  • Great Barrington, Massachusetts, United States
  • May 26th
Milwaukee 6515-20 Heavy Duty Sawzall Reciprocating Saw With 18 Volt Battery

Milwaukee 6515-20 Heavy Duty Sawzall Reciprocating Saw With 18 Volt Battery

  • Salisbury, North Carolina, United States
  • May 27th
Milwaukee 48-00-5188 5 Pk 9" 18TPI SAWZALL® Blades MADE IN U.S.A.

Milwaukee 48-00-5188 5 Pk 9" 18TPI SAWZALL® Blades MADE IN U.S.A.

  • Ringwood, New Jersey, United States
  • May 27th
Dewalt DW304P Reciprocating Saw ZawSaw

Dewalt DW304P Reciprocating Saw ZawSaw

  • San Tan Valley, Arizona, United States
  • May 27th
MILWAUKEE 2612-20 M18 CORDLESS 18V 5/8" ROTARY HAMMER DRILL SDS PLUS

MILWAUKEE 2612-20 M18 CORDLESS 18V 5/8" ROTARY HAMMER DRILL SDS PLUS

  • Milan, Michigan, United States
  • May 27th
3 ea. 2 Pack (6 Blades) Irwin 3071410D 4" 10TPI Downcut U-Shank Jig Saw Blades

3 ea. 2 Pack (6 Blades) Irwin 3071410D 4" 10TPI Downcut U-Shank Jig Saw Blades

  • Goodyear, Arizona, United States
  • May 29th
Hilti 253236 6-Inch x 6 TPI Wood and Nail Reciprocating Saw Blades, 50-Pack NEW

Hilti 253236 6-Inch x 6 TPI Wood and Nail Reciprocating Saw Blades, 50-Pack NEW

  • Wainfleet, Ontario, Canada
  • May 29th
Lenox Medium Metal Blade 618R 18T

Lenox Medium Metal Blade 618R 18T

  • Kansas City, Missouri, United States
  • May 29th
Husqvarna DT8+ 7” Tuckpoint Wet/Dry Diamond Blade 542774625

Husqvarna DT8+ 7” Tuckpoint Wet/Dry Diamond Blade 542774625

  • Columbus, Ohio, United States
  • May 29th
ROBERT BOSCH PRO1048ST Steel Cutting Carbide-Tipped Saw Blade

ROBERT BOSCH PRO1048ST Steel Cutting Carbide-Tipped Saw Blade

  • Duncan, South Carolina, United States
  • Jun 9th
ARNTZ - BLADE SIZE: 2 - 32 / 120 Teeth

ARNTZ - BLADE SIZE: 2 - 32 / 120 Teeth

  • Flushing, New York, United States
  • Jun 9th
BOSCH PRO1060NF Industrial Circular Saw Blade - Diameter x Tooth: 10" x 60 TCG

BOSCH PRO1060NF Industrial Circular Saw Blade - Diameter x Tooth: 10" x 60 TCG

  • Flushing, New York, United States
  • Jun 9th
Makita beam circular saw 5402-A

Makita beam circular saw 5402-A

  • San Jose, California, United States
  • Jun 9th
Ryobi AP1300 Ridgid MS1065LZ Miter Saw 2PCs Carbon Brush Table Saw OEM 976683001

Ryobi AP1300 Ridgid MS1065LZ Miter Saw 2PCs Carbon Brush Table Saw OEM 976683001

  • New York, New York, United States
  • Oct 30th
Dewalt DW718 Miter Saw OEM Replacement Dust Assembly # 624719-00

Dewalt DW718 Miter Saw OEM Replacement Dust Assembly # 624719-00

  • New York, New York, United States
  • Oct 30th
Dewalt DW718 DWS780 DW708 Miter Saw Replacement Ball Bearing 2PCs # N127530

Dewalt DW718 DWS780 DW708 Miter Saw Replacement Ball Bearing 2PCs # N127530

  • New York, New York, United States
  • Oct 30th
Dewalt Dw718

Dewalt Dw718

  • Janesville, Wisconsin, United States
  • Oct 31st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies