Ifr Marconi Aeroflexan-1830aspectrum Analyzer 9khz-22ghz Tested And Calibrated

US $17000

Las Vegas, Nevada, United States
May 27th

Open on mobile:
QR code

Click Here. Double your traffic. Get Vendio Gallery - Now FREE! IFR MARCONI AEROFLEX 1830A SPECTRUM ANALYZER CALL PAUL AT 1-702-285-3432 OR EMAIL VIA EBAY IFR Systems (Aeroflex) 1890 kHz to 22 GHZ Spectrum Analyzer The IFR Systems (Aeroflex) AN-1830A spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the IFR Systems (Aeroflex) AN-1830A. The CRT displays received signal strength (y-axis) against frequency ( x-axis). Some applications for IFR Systems (Aeroflex) AN-1830A Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a IFR Systems (Aeroflex) AN1830A spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the IFR Systems (Aeroflex) AN-1830A spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components. Feature: Minimum Frequency: 9kHz Maximum Frequency: 22GHz Resolution bandwidth: 3Hz FEATURES - Fully synthesized Spectrum Analyzers to 22 GHz - 3 Hz to 30 MHz resolution bandwidth filters - Excellent intermodulation performance - +30 to -135 dBm measurement range - Measurements to 300 GHz with external mixers - Optional built-in tracking generator - Receiver mode with AM and FM demodulators - Optional quasi-peak detector and EMC filters The AN-1830 series of spectrum analyzers from IFR combine exceptional performance with excellent value for money. There are three instruments in the range: AN1830 9 kHz to 22 GHz Frequency Accuracy All three instruments are fully synthesized to give accurate frequency measurements. Even on wide spans the AN-1830 series gives precise frequency measurements and an integral frequency counter enables the measur Built-in AM/FM receiver Network Measurements In-built FFT & O-scope Active Probe(50kHz-1.25GHz) Performance Characteristics of the AN-1830 Form Factor Mainframe Input Impedance 50 Ohm Minimum Frequency 9 kHz Maximum Frequency 22 GHz Frequency Accuracy 0.002 % Zero Span Yes Minimum Span 10 Hz Maximum Span 2.2 GHz Minimum Sweep Time 2 ns Maximum Sweep Time 10 s Minimum Resolution Bandwidth 3 Hz Maximum Resolution Bandwidth 30 MHz Resolution Bandwidth Steps 1/10/100 Minimum Video Bandwidth 10 Hz Maximum Video Bandwidth 1 MHz Video Bandwidth Steps 1/10/100 Minimum Single-Side-Band Noise -101 dBc/Hz Maximum Single-Side-Band Noise -81 dBc/Hz Maximum Safe AC Input 20 dBm Maximum DC Input 0 V Minimum Displayed Average Noise -135 dBm Maximum Displayed Average Noise -95 dBm Trigger Source External,Internal Trigger Modes Freerun,TTL Demodulation AM,FM Connector type (main signal) BNC(f) 2nd IF Input Connector Type SMA(f) 1st Local Oscillator (LO) Output Connector SMA(f) Cal Output Connector Type BNC(f) Probe Power No Noise Source Driver No Programmability/Connectivity of the AN-1830 User Interface Proprietary Ports to Peripheral Devices GPIB,RS232 Test Pattern Storage 45 Patterns Novram data storage Yes External Video Out Yes AN-1830 Compliance CE Compliance Compliant UL Compliance Not compliant