Iled Dental Wireless Led Curing Light Lamp 1 Second Cure Dte Style 1s

US $65.99

Beijing, China
Jul 9th

Open on mobile:
QR code

Product Overview iLED Dental Wireless LED Curing Light Lamp 1 Second Curing Cure DTE Style Detail Introduction: 1.Technical specifications 1.1Dimensions: 25mm25mm240mm 1.2 Net weight: 280g 1.3 Power source 1.3.1 Power supply: rechargeable Lithium battery 1.3.2 Battery mode: ICR 18490 1.3.3 Battery voltage and capacity: 3.7V/ 1400mAh,Battery has protection against Over-voltage, over-current and short circuit. 1.3.4 Adapter Power Input: 100V to 240V, 50Hz/60 Hz Input Power: 10VA Power Output: DC5V/1A 1.4 Light source: 1.4.1 5W high power blue light LED 1.4.2 Checking method: the LED light is fine when the light is on during operating correctly. 1.4.3 The wave length of this product can match with the clinical dental resin solidification, such as 3M, Dentsply etc. 1.4.4 Wave length: 385nm-515nm 1.5 Light intensity: 1000 mW/c~2300mW/c 2. Operation 2.1 Press the mode button. Following two modes are available. 2.1.1 TURBO Mode: screen shows P1, Press the time button to select of time which could be 1 and 3 seconds.Its output light intensity is about 1800 mW/c-2300mW/cm2 2.1.2 NORMAL Mode: screen shows P2, Press the time button to select of time which could be 5,10 ,15and 20 seconds.Its output light intensity is about 1000 mW/c-1200 mW/c 2.2 During the operation, put the disposable sleeve on the top of the main unit, aim the top at the correct position, press the ON/OFF button and the main unit will produce "Bi" sound, the curing light radiates blue light and starts working according to the set modes. Meanwhile, it starts counting down and will produce tone at every 5 seconds, it stops working when counting down to "0". 2.3 During operation, the blue light can be stopped by press the power button at any time. 2.4 After a working cycle, operator can press the ON/OFF switch to start another working cycle. Stop operating if the equipment began to heat obviously, do not restart until the equipment cool down. Suggest continues working cycle less than 10 times. 2.5 Low power detective circuit is fixed inside of the main unit, when low power is detected,the display screen of main unit will wink, please charge in time. 2.6 When the battery needs to be charged, connect the plug of the adapter into the AC100V~240V power supply. Then connect the output plug of the adapter to the DC 5.0V input plug of the pedestal, and then the logo turn to blue. Put the main unit to the charging point of the pedestal, the display screen turn to scrolling display, and the curing lights starts charging. 2.7 After operating, take off the disposable sleeve and throw away, forbidden to reuse. 2.8 This equipment will turn off automatically if don't any action within 2 minutes, turn it on by press any button. 2.9 The depth of solidification of composite is no less than 2mm per 1 second. 510(K) Number: K192233 Regulation Number: 21 CFR 872.6070 Product Code: EBZ Payment 1. We accept Paypal only. 2. You should make the payment within 7 days of auction close. 3. We will send a last payment reminder if the payment is not received after 7 days. Shipping 1. We will send the item within 48 hours after the payment is full and cleared 2. All the items are inspected for damage or defects prior to leaving our warehouse. Contact us immediately if shipping damage is discovered. 3. We will send the item by international economy shipping to you. Refund 1. We accept the returne within 14 days after the item is received. Pls make sure the item is in original condition. 2. we'll be happy to make an exchange but the buyer has to offer the shipping cost . 3. Please do remember to email me in advance when you return it back and you should let me know the reasons (if there is a picture could be even better). Without this information, the return won't be processed. Term of Sale Import duties, taxes and charges are not included in the item price or shipping costs. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these addtional costs will be prior to bidding or buying. About Us Business Time:Monday-Friday:From 8:30 Am to 18:00 Pm(Beijing time) Saturday:From 8:30 Am to 15:00 Pm (Beijing time) Copyright?secretlove2017 Store,All rights reserved.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Model	iLED
Light intensity	1000 mW/c~2300mW/c
Country/Region of Manufacture	China
MPN	Does Not Apply
Type	Curing light
Battery mode	ICR 18490
Warranty	3 month,30 days returns
510(K) Number	K192233
Shipping time	Tracking no. provided in 24H
Regulation Number	21 CFR 872.6070
Approve	CE&FDA
Product Code	EBZ
SHIPPING	US STOCK 24H Handle 2-5days delivery
Light Type	LED
Power input	AC100V-240V
Brand	SKYSEA
Light intensity up to	2300mW
Intended Use/Discipline	Dental Laboratory, Dentistry, Endodontics
Featured Refinements	Dental LED Curing Light