INDECO HP10000 - 10000 FT LB Impact energy-Rebuilt-ready for work, US $65,000.00 – Picture 0

INDECO HP10000 - 10000 FT LB Impact energy-Rebuilt-ready for work, US $65,000.00 – Picture 1

INDECO HP10000 - 10000 FT LB Impact energy-Rebuilt-ready for work, US $65,000.00 – Picture 2

INDECO HP10000 - 10000 FT LB Impact energy-Rebuilt-ready for work, US $65,000.00 – Picture 3

INDECO HP10000 - 10000 FT LB Impact energy-Rebuilt-ready for work, US $65,000.00 – Picture 4

INDECO HP10000 - 10000 FT LB Impact energy-Rebuilt-ready for work, US $65,000.00 – Picture 5

Indeco Hp10000 - 10000 Ft Lb Impact Energy-rebuilt-ready For Work

US $65,000.00

Worcester, Massachusetts, United States
Jan 30th

Open on mobile:
QR code

You are bidding on an INDECO HP 10000 Hydraulic Hammer 10000 Ft. Lb Finance now (Own or Lease) for 6% and under !! Why do contractors send their hammers to FEL-TECH Hammer Division from 48 states and Canada for rebuilding? THEY WANT IT REBUILT CORRECTLY......THE FIRST TIME. Contractors do not need stories ! They need quality and production! FEL-TECH Hammer Division has the only full vertical test center in the United States, Canada and South America. Watch a hydraulic hammer power cell being tested and certified at FEL-TECH http://www.youtube.com/watch?v=tokcIR-MSHM REBUILT TO PERFORM REBUILT TO WORK Our reputation, quality and testing speaks for itself You are bidding on an INDECO HP 10000 Hydraulic Hammer Includes an extra tool (Chisel or Moil point) Finance now (Own or Lease) for 6% and under !! Tested on the only full vertical test center in The United States, Canada and South America. Only at FEL-TECH Hammer Division. READ ABOUT OUR FINANCE PLANS BELOW! (we collateralize only the equipment we are financing, no blanket liens) • Challenged credits OK, with a minimum FICO score of 500 • Bankruptcy OK with re-established credit • Business based out of US and/or Canada $65,000.00 or best offer Finance now (Own or Lease) for 6% and under !! Buy, Finance or Lease SPECIFICATIONS SPECIFICATIONS Energy Class 10000 Ft. Lb. Blows Per Minute 500 - 900 Standard Carrier Weight 90,000 - 160,000 Lbs. Working Weight 8900 Lbs. Length of Tool 57 In Diameter of Tool 180 mm Tool Weight 575 Lbs. Accumulator Charge 475 - 550 Psi Required Flow @ Operating Pressure 67 -- 81 Gpm Operating Pressure 2200 - 2350 ± 100 Psi Circuit Relief 2,600 Psi Preferred Backpressure 120 Allowable Maximum Backpressure 120 Psi Oil Temperature for Setting Flows & Pressures 150 ° F The following parts have been installed: New Piston New lower dampener 4 x new side pad buffers 4 x Tie bars and nuts Upper bushing Lower bushing Seal Kit Diaphragm Mounting pins Tool Corporate Office-United States Sales-Global FEL-TECH 3 Month Warranty-global Service-Global Installation-Global Parts-Global Rebuild Centers-Global Shipping-Global Customer Service-Global We will include an extra tool bit (MOIL POINT OR CHISEL) at no charge and free shipping in the United States You know FEL-TECH Hammer Division as your worldwide source for hydraulic hammer wear parts for over 1500 models of hydraulic hammers. You know FEL-TECH Hammer Division as the largest hydraulic hammer wear parts center in the world. You will receive the following; One INDECO HP 10000 Hydraulic hammer including; 1. ONE NEW AMERICAN MADE TOOL 2. 2 MOUNTING PINS 3. TWO NEW HYDRAULIC HOSES 4. A NEW BATTERY POWERED GREASE GUN 5. OPERATOR INSTRUCTIONS 6. PARTS BREAKDOWN 7. GUARANTEED SAME DAY SHIPPING ON REPLACEMENT PARTS 8. FREE SHIPPING IN THE 48 STATES 9. DISCOUNTED INTERNATIONAL SHIPPING RATES 10. WORLDWIDE INSTALLATION SERVICES (QUOTES ARE AVAILIABLE) 8 A.M EST - 5 P.M. PST CUSTOMER PHONE SUPPORT 5 A.M EST – 5 P.M. PST EMAIL SUPPORT AT SALES@FEL-TECH.COM "THE CONTRACTORS CHOICE FOR QUALITY REBUILT HYDRAULIC HAMMERS" Fully rebuilt INDECO HP 10000 hydraulic hammer. Are you thinking about "taking a chance" on an auction hammer? Are you considering buying an untested hammer from an unknown party? Are you wondering if buying from a hydraulic hammer company that claims, to have a test center for hydraulic hammers, is the best choice? Ask that company to send you a picture or video of their test center in full operation. FEL-TECH Hammer Division has the only full vertical test center for hydraulic hammers in The United States. No other company can make this statement. We rebuild and sell hydraulic hammers to contractors in all states in The United States and Canada. "It's not the hammer only, It's the reputation of the hydraulic hammer company that makes a very safe and smart investment. SPECIFICATIONS Energy Class 10000 Ft. Lb. Blows Per Minute 500 - 900 Standard Carrier Weight 90,000 - 160,000 Lbs. Working Weight 8900 Lbs. Length of Tool 57 In Diameter of Tool 180 mm Tool Weight 575 Lbs. Accumulator Charge 475 - 550 Psi Required Flow @ Operating Pressure 67 -- 81 Gpm Operating Pressure 2200 - 2350 ± 100 Psi Circuit Relief 2,600 Psi Preferred Backpressure 120 Allowable Maximum Backpressure 120 Psi Oil Temperature for Setting Flows & Pressures 150 ° F This hydraulic hammer has had the following items replaced and is ready for work. New piston 4 new tie bars 4 new side pad shock absorbers New upper bushing New lower bushing New seal kit New tool retainers New tool New diaphragm New valve seal kit New Lower buffer TWO NEW TOOLS INCLUDED !! NEW AUTO GREASER IS ALSO INCLUDED !! Case has been sand blasted inside and outside. Case has been inspected for cracks Case has additional wear plates added to exterior bottom "IN ORDER TO OBTAIN A GLOBAL REPUTATION, FEL-TECH AND OUR WORKING PARTNERS MUST EXCEL" Contractors around the world know and trust FEL-TECH Hammer Division for their products and their high standards when it comes to offering new and rebuilt hydraulic hammers. FEL-TECH Hammer Division has the only full vertical test center in the United states, Canada and South America. Many contractors around the world now buy replacement wear parts from FEL-TECH Hammer Division because of their trust in our company for our products and services. Our services and products have allowed FEL-TECH Hammer Division to become the largest hydraulic hammer replacement wear parts center in the world. In many cases our competition now relies upon FEL-TECH Hammer Division for their quality hydraulic hammer replacement parts. FEL-TECH Offers Financing for up to 5 Yrs Buy any of our hammers on eBay and you can apply for leasing or financing through FEL-TECH Your new or rebuilt hydraulic hammer can be financed without using or affecting your personal credit. The more equipment you finance using traditional financing, the more this impacts your credit score and uses up valuable emergency resources. Construction equipment leasing on the other hand has no impact on your personal credit score, keeps your unsecured lines of credit available for emergencies and affords you much more buying power. Construction equipment leasing also offers tax advantages. Construction equipment leasing increases your liabilities and that translates into a lower tax burden to the IRS. Call 508-552-0023 and ask about financing FEL-TECH FINANCE PLANS ARE THE BEST IN THE INDUSTRY • Challenged credits OK, with a minimum FICO score of 500 • Bankruptcy OK with re-established credit • Business based out of US and/or Canada "Our mission is to match your cash flows. If you wish to purchase a hydraulic hammer that is new to your inventory, we will delay your payments up to three months. This will allow you the time to build the cliental and income prior to starting your lease payments. It will also provide you with the time to complete your project on time and on budget. If you have slow times of the year, we will provide you with seasonal plans; you can choose three consecutive months per year that you will make no payments at all. If you have a need, please call us so we can discuss it." "What better way to add a profit center to your business than with lease to own financing. If you have a need for equipment we can add it to your fleet without disrupting your current business. We don't drain your cash (we finance 100% of purchase price including freight and set up charges); we don't tie up your assets (we collateralize only the equipment we are financing, no blanket liens); and the profits from equipment will make the payments and put money in the bank for you." THE CONTRACTOR'S 90 DAY PREFERED / DEFERRED PAYMENT PLAN Begin the lease with one month’s payment and then take 90 days off. Use these 90 days to get the equipment in and generating profit, then begin making payments. STANDARD LOAN / LEASE PLAN Twelve payments per year on your choice of a lease or loan. Choose your purchase option depending on your tax and accounting needs. New or used equipment OK. SEASONAL PAYMENT PLAN This plan allows the lessee to take up to three months per year with no payments. If your cash flow is seasonal, this is a perfect plan. 10 % DOWN PLAN Put 10% down if you have the cash available. This will lower the monthly payment and it may be used to pay the purchase option at the end of the lease, or can be returned to you. You can still enjoy the benefits of the true tax lease with no “residual” payment at the end of the lease. 3 X 100 PLAN The lease begins with 1 payment down, followed by $100 per month for the next three months. This allows the lessee three months to get the equipment in and generating profit before beginning to make payments. It is also great for back ordered equipment, delays in production or to purchase equipment that isn’t really needed for a few months. 3 X 200 PLAN The lease begins with 1 payment down, followed by $200 per month for the next three months. This allows the lessee three months to get the equipment in and generating profit before beginning to make payments. It is also great for back ordered equipment, delays in production or to purchase equipment that isn’t really needed for a few months. 3 x 300 PLAN The lease begins with 1 payment down, followed by $300 per month for the next three months. This allows the lessee three months to get the equipment in and generating profit before beginning to make payments. It is also great for back ordered equipment, delays in production or to purchase equipment that isn’t really needed for a few months. 3 x 400 PLAN The lease begins with 1 payment down, followed by $400 per month for the next three months. This allows the lessee three months to get the equipment in and generating profit before beginning to make payments. It is also great for back ordered equipment, delays in production or to purchase equipment that isn’t really needed for a few months. 3 x 500 PLAN The lease begins with 1 payment down, followed by $500 per month for the next three months. This allows the lessee three months to get the equipment in and generating profit before beginning to make payments. It is also great for back ordered equipment, delays in production or to purchase equipment that isn’t really needed for a few months. CONTRACTOR'S CREATION APPLICATION Create your own 3 x plan" based on the cost of your Hydraulic Hammer. STEP-DOWN PLAN This Plan is excellent to work around a specific job that may require the lessee to purchase a hydraulic hammer. Example: lessee has a job that will last 9 months and needs a hydraulic hammer to complete the job. He knows he will have great cash flow at the beginning. You may wish to make larger payments for the first year, and then reduce them thereafter A HIGH QUALITY HYDRAULIC HAMMER WITH VERY LOW MAINTENANCE COST THAT IS COMPETITIVELY PRICED. Visit our web site for more information about parts for hydraulic hammers: http://www.fel-tech.com/ sales@fel-tech.com FEL-TECH Hammer Division 1 Pullman Street Worcester, Massachusetts 01606 TOLL FREE-1-877-U-BREAK-ROCK (1-877-827-3257) PHONE-508-552-0023 FAX - 508-552-0024

Condition	Seller refurbished : An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details.
Seller Notes	“Condition is excellent. New piston, upper bushing, lower bushing, tie bars, seal kit, Diaphragm, hoses, lower buffer-side pad buffers”