+ Post new Ad
INDEXABLE DRILL TIP ICP-0437 ISCAR SUMOCHAM GRADE IC908 FOR STEEL NEW $31.95, US $31.95 – Picture 0
INDEXABLE DRILL TIP ICP-0437 ISCAR SUMOCHAM GRADE IC908 FOR STEEL NEW $31.95, US $31.95 – Picture 1
INDEXABLE DRILL TIP ICP-0437 ISCAR SUMOCHAM GRADE IC908 FOR STEEL NEW $31.95, US $31.95 – Picture 2
INDEXABLE DRILL TIP ICP-0437 ISCAR SUMOCHAM GRADE IC908 FOR STEEL NEW $31.95, US $31.95 – Picture 0
INDEXABLE DRILL TIP ICP-0437 ISCAR SUMOCHAM GRADE IC908 FOR STEEL NEW $31.95, US $31.95 – Picture 1
INDEXABLE DRILL TIP ICP-0437 ISCAR SUMOCHAM GRADE IC908 FOR STEEL NEW $31.95, US $31.95 – Picture 2

Indexable Drill Tip Icp-0437 Iscar Sumocham Grade Ic908 For Steel New $31.95

US $31.95

  • North Tonawanda, New York, United States
  • Jan 30th
Open on mobile:
QR code
It's indexable and available for a cost of $31.95 each. We always combine items and immediately refund you due to shipping. Boost your steel drilling performance with the IC908 Iscar Sumocham grade drill tip. Its drill tip diameter is .437". It's a new product in the original packaging, manufactured by Iscar in Israel. The package comes with 2 pieces, and we'll ensure secure packing for less than the package quantity. Our company specializes in closeout and surplus merchandise since 1962, so don't forget to add us to your favorites. The IC908 Iscar Sumocham grade drill tip, with the part number/EDP# ICP-0437, is perfect for use on steel.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer ISCAR
Model SUMOCHAM DRILL TIP
Brand ISCAR
MPN 05508287
Country/Region of Manufacture Israel
Country of Manufacture Israel

Directions

Similar products from Indexable Tool Holders

Used Lathe Tool Holder 1" Snap-Tap CER 100 5-160 Carbide Insert USA

Used Lathe Tool Holder 1" Snap-Tap CER 100 5-160 Carbide Insert USA

  • Elkin, North Carolina, United States
  • Jan 30th
Used Lathe Tool Holder 1" Sandvik CKJNL 16-3D Carbide Insert USA

Used Lathe Tool Holder 1" Sandvik CKJNL 16-3D Carbide Insert USA

  • Elkin, North Carolina, United States
  • Jan 30th
Used Lathe Tool Holder 1" Valenite TMIL-16-43 Carbide Insert USA

Used Lathe Tool Holder 1" Valenite TMIL-16-43 Carbide Insert USA

  • Elkin, North Carolina, United States
  • Jan 30th
Used Lathe Tool Holder 1" Carboloy MTRNR-16-4 Carbide Insert USA

Used Lathe Tool Holder 1" Carboloy MTRNR-16-4 Carbide Insert USA

  • Elkin, North Carolina, United States
  • Jan 30th
Used Lathe Tool Holder 1" Snap-Tap CEAL 100 6-14 Carbide Insert USA

Used Lathe Tool Holder 1" Snap-Tap CEAL 100 6-14 Carbide Insert USA

  • Elkin, North Carolina, United States
  • Jan 30th
Used Lathe Tool Holder 1" MTVOR-164 Carbide Insert USA

Used Lathe Tool Holder 1" MTVOR-164 Carbide Insert USA

  • Elkin, North Carolina, United States
  • Jan 30th
Used Lathe Tool Holder 1 1/4" MTVOR-205 Carbide Insert USA

Used Lathe Tool Holder 1 1/4" MTVOR-205 Carbide Insert USA

  • Elkin, North Carolina, United States
  • Jan 30th
Nutsert tool and inserts

Nutsert tool and inserts

  • Louisville, Kentucky, United States
  • Jan 30th
Facemill Cutter Mitsubishi BSX400R0408E- 2 pieces & 40 inserts

Facemill Cutter Mitsubishi BSX400R0408E- 2 pieces & 40 inserts

  • Griffith, Indiana, United States
  • Jan 30th
SHARS 2" 90 Degree Face Shell Mill TPG 322 Carbide Insert

SHARS 2" 90 Degree Face Shell Mill TPG 322 Carbide Insert

  • Saint Charles, Illinois, United States
  • Jan 30th
INDEXABLE DRILL TIP ICP-0484 ISCAR SUMOCHAM GRADE IC908 FOR STEEL NEW $31.96

INDEXABLE DRILL TIP ICP-0484 ISCAR SUMOCHAM GRADE IC908 FOR STEEL NEW $31.96

  • North Tonawanda, New York, United States
  • Jan 30th
INDEXABLE DRILL TIP ICP-0500 ISCAR SUMOCHAM GRADE IC908 FOR STEEL NEW $31.97

INDEXABLE DRILL TIP ICP-0500 ISCAR SUMOCHAM GRADE IC908 FOR STEEL NEW $31.97

  • North Tonawanda, New York, United States
  • Jan 30th
INDEXABLE DRILL TIP ICP-0516 ISCAR SUMOCHAM GRADE IC908 FOR STEEL NEW $31.98

INDEXABLE DRILL TIP ICP-0516 ISCAR SUMOCHAM GRADE IC908 FOR STEEL NEW $31.98

  • North Tonawanda, New York, United States
  • Jan 30th
INDEXABLE DRILL TIP ICP-0579 ISCAR SUMOCHAM GRADE IC908 FOR STEEL NEW $31.99

INDEXABLE DRILL TIP ICP-0579 ISCAR SUMOCHAM GRADE IC908 FOR STEEL NEW $31.99

  • North Tonawanda, New York, United States
  • Jan 30th
INDEXABLE DRILL TIP ICP-0610 ISCAR SUMOCHAM GRADE IC908 FOR STEEL NEW $32.00

INDEXABLE DRILL TIP ICP-0610 ISCAR SUMOCHAM GRADE IC908 FOR STEEL NEW $32.00

  • North Tonawanda, New York, United States
  • Jan 30th
INDEXABLE DRILL TIP ICP-0642 ISCAR SUMOCHAM GRADE IC908 FOR STEEL NEW $32.01

INDEXABLE DRILL TIP ICP-0642 ISCAR SUMOCHAM GRADE IC908 FOR STEEL NEW $32.01

  • North Tonawanda, New York, United States
  • Jan 30th
INDEXABLE DRILL TIP ICP-0720 ISCAR SUMOCHAM GRADE IC908 FOR STEEL NEW $32.02

INDEXABLE DRILL TIP ICP-0720 ISCAR SUMOCHAM GRADE IC908 FOR STEEL NEW $32.02

  • North Tonawanda, New York, United States
  • Jan 30th
Valenite Indexable End Mill Set

Valenite Indexable End Mill Set

  • Fullerton, California, United States
  • Jan 30th
ID Thread Turning Insert, 16 NL AG60 3/8 Bit Pack of 10

ID Thread Turning Insert, 16 NL AG60 3/8 Bit Pack of 10

  • Athens, West Virginia, United States
  • Jan 30th
Iscar MSDNN-164 Toolholder

Iscar MSDNN-164 Toolholder

  • Fort Worth, Texas, United States
  • Jan 30th

People who viewed this item also vieved

PARLEC C50-15SA6 CAT50 STUB ARBOR WITH 1-1/2" DIA. ARBOR CAT 50 LOT C10801

PARLEC C50-15SA6 CAT50 STUB ARBOR WITH 1-1/2" DIA. ARBOR CAT 50 LOT C10801

  • Dayton, Ohio, United States
  • Mar 27th
kennametal cv50ss 100600

kennametal cv50ss 100600

  • Broad Brook, Connecticut, United States
  • Mar 28th
Kennametal 3/4" x 10" Solid Carbide Bore Bar E12SCLPR2

Kennametal 3/4" x 10" Solid Carbide Bore Bar E12SCLPR2

  • Johnson City, New York, United States
  • May 15th
Sandvik Varilock A391.20-31 63 080M 1.25" End Mill Holder

Sandvik Varilock A391.20-31 63 080M 1.25" End Mill Holder

  • Johnson City, New York, United States
  • May 16th
METABO W24-230 9" Grinder - Length: 18"

METABO W24-230 9" Grinder - Length: 18"

  • Duncan, South Carolina, United States
  • Jun 23rd
NEW MEDA SUPERIOR IMPORT R8 R-8 SHELL MILL ARBOR (1/2" PILOT) POLAND 2165002

NEW MEDA SUPERIOR IMPORT R8 R-8 SHELL MILL ARBOR (1/2" PILOT) POLAND 2165002

  • Fairfield, Iowa, United States
  • Jun 23rd
NEW BROWNING H50P20, Steel Sprocket For #50 Chain 20 TEETH, NEW IN BOX, NOS

NEW BROWNING H50P20, Steel Sprocket For #50 Chain 20 TEETH, NEW IN BOX, NOS

  • Rockingham, North Carolina, United States
  • May 25th
NEW BROWNING H50P19 SPROKET 19 TEETH 50 CHAIN, NEW IN FACTORY BOX, NEW OLD STOCK

NEW BROWNING H50P19 SPROKET 19 TEETH 50 CHAIN, NEW IN FACTORY BOX, NEW OLD STOCK

  • Rockingham, North Carolina, United States
  • May 25th
MST BT50 SLSA 1/4 165S53

MST BT50 SLSA 1/4 165S53

  • Saint Helen, Michigan, United States
  • May 27th
MST BT50 SLSA 1/4 195S54

MST BT50 SLSA 1/4 195S54

  • Saint Helen, Michigan, United States
  • May 27th
KPT Diaset CNC Tool Presetter D240 Innotool

KPT Diaset CNC Tool Presetter D240 Innotool

  • Wayne, Ohio, United States
  • May 30th
HEAVY DUTY CNC PLUNGE AND FEED KNURLING TOOL HOLDER 20X25X140 WITH WHEEL COARSE

HEAVY DUTY CNC PLUNGE AND FEED KNURLING TOOL HOLDER 20X25X140 WITH WHEEL COARSE

  • DELHI, DELHI, India
  • May 30th
Craftsman 109 Atlas Dunlop Mini Quick Change Tool Post

Craftsman 109 Atlas Dunlop Mini Quick Change Tool Post

  • Burnsville, North Carolina, United States
  • Jun 8th
ALORIS CXA TOOL POST SET

ALORIS CXA TOOL POST SET

  • Edison, New Jersey, United States
  • Jun 8th
Albrecht Keyless Drill Chuck 0-3/16" 0-5mm Range 50 J1 With 1/2" Shank Gremany

Albrecht Keyless Drill Chuck 0-3/16" 0-5mm Range 50 J1 With 1/2" Shank Gremany

  • Lake Hughes, California, United States
  • Jun 8th
Albrecht Keyless Drill Chuck 0-1/4" 0-6.5mm Range 65 J1 With 1/2" Shank Germany

Albrecht Keyless Drill Chuck 0-1/4" 0-6.5mm Range 65 J1 With 1/2" Shank Germany

  • Lake Hughes, California, United States
  • Jun 8th
Sunnen Hone 3G P20 848 Mandrel w/ NEW Stones, Shoes, Wedge, 3ML 843 (old number)

Sunnen Hone 3G P20 848 Mandrel w/ NEW Stones, Shoes, Wedge, 3ML 843 (old number)

  • Scottsdale, Arizona, United States
  • Jun 9th
Sunnen KL-900 with Sunnen S-900 and Sunnen AAY20-A

Sunnen KL-900 with Sunnen S-900 and Sunnen AAY20-A

  • Pickerington, Ohio, United States
  • Jun 9th
Sauter VDI 30 Live Tool Holder Drill Tool Chuck & Collet Part#0.5.921.103-77.410

Sauter VDI 30 Live Tool Holder Drill Tool Chuck & Collet Part#0.5.921.103-77.410

  • Staten Island, New York, United States
  • Oct 25th
Nema 34 3phase 4.5N.m 637ozf.in stepperMotor 86mm frame 12mm shaft 86J12103-650

Nema 34 3phase 4.5N.m 637ozf.in stepperMotor 86mm frame 12mm shaft 86J12103-650

  • DongGuan, China
  • Oct 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies