+ Post new Ad
Indexable face milll - Widia 3 1/4inch MIL-TEC 3 inch -19 new inserts Bridgeport, US $35 – Picture 0
Indexable face milll - Widia 3 1/4inch MIL-TEC 3 inch -19 new inserts Bridgeport, US $35 – Picture 0

Indexable Face Milll - Widia 3 1/4inch Mil-tec 3 Inch -19 New Inserts Bridgeport

US $35

  • Peru, Illinois, United States
  • Jun 9th
Open on mobile:
QR code
Widia is in good condition - it is loaded with 5 TPG-321 inserts which are due for replacement.  I would suggest a larger radius if you can use it. Marked, WIDIAX M40 H1 60321 WIDIA 80 R-5 The MIL-TEC looks rough, but it has flat seats, holds both round and hex inserts firmly and runs true.  We ran a ton of 4140 pre-hard with this cutter on a 7 horse machine without a problem.  The 5 inserts in it have some good segments left on them and the boxes have 19 brand new inserts, also from MIL-TEC. There are 7 used Octagonal inserts with enough good corners to load the cutter a couple of times.  The round and oct inserts are available from MIL-TEC or several other sources.  The TPG inserts are available from dozens of sources. The R-8 Bridgeport shank fits both cutters. Added 4 Octagonal inserts to the listing.

Directions

Similar products from End Mills Router & Drill Bits

OSG I Inch roughing cobalt endmill

OSG I Inch roughing cobalt endmill

  • Phillipsburg, New Jersey, United States
  • Jun 10th
KENNAMETAL WIDIA SC ENDMILL 8MM 3FL TIALN 8x10x36x83

KENNAMETAL WIDIA SC ENDMILL 8MM 3FL TIALN 8x10x36x83

  • BANGALORE, KARNATAKA, India
  • Jun 9th
6L Ball Grinding Mill Machine Horizontal Lab Planetary Ball Milling Machine A

6L Ball Grinding Mill Machine Horizontal Lab Planetary Ball Milling Machine A

  • cn,cn, China
  • Jun 9th
KENNAMETAL EXTRA LONG 12MM BALLNOSE ENDMILL HN431KIN26099 12x12x60-90x150 3FL

KENNAMETAL EXTRA LONG 12MM BALLNOSE ENDMILL HN431KIN26099 12x12x60-90x150 3FL

  • BANGALORE, KARNATAKA, India
  • Jun 9th
Mixed Lot - Keyseat Cutter End Mills -Roughing Single & Double End - HSS MORSE

Mixed Lot - Keyseat Cutter End Mills -Roughing Single & Double End - HSS MORSE

  • Mentor, Ohio, United States
  • Jun 9th
GUHRING 16MM ENDMILL 2FL No03635 - 16,000

GUHRING 16MM ENDMILL 2FL No03635 - 16,000

  • BANGALORE, KARNATAKA, India
  • Jun 9th
Interstate #1108-5100 1" x 1" x 4" x 6-1/2" 4F Uncoated Cobalt Long CC End Mills

Interstate #1108-5100 1" x 1" x 4" x 6-1/2" 4F Uncoated Cobalt Long CC End Mills

  • Venice, Florida, United States
  • Jun 9th
Fullerton End Mill 4 30 Deg RH Flt drill bit

Fullerton End Mill 4 30 Deg RH Flt drill bit

  • Marietta, Georgia, United States
  • Jun 9th
Interstate End Mills 10792048 3/4" x 3/4" x 1-5/8" x 3-7/8" 4F Uncoated HSS M2

Interstate End Mills 10792048 3/4" x 3/4" x 1-5/8" x 3-7/8" 4F Uncoated HSS M2

  • Venice, Florida, United States
  • Jun 9th
Waukesha Sanitary Pump Stainless 10HP Baldor Motor Good Condition Very Low Price

Waukesha Sanitary Pump Stainless 10HP Baldor Motor Good Condition Very Low Price

  • Deer Park, New York, United States
  • Jun 9th
5PCS Extra Long 3mm 2 Flute HSS & Aluminium End Mill Cutter CNC Bit Extended

5PCS Extra Long 3mm 2 Flute HSS & Aluminium End Mill Cutter CNC Bit Extended

  • Shanghai, China
  • Jun 9th
OSG #36702711 1/2" x 1/2" x 1" x 3" 4F WXL Carbide Corner Radius End Mill

OSG #36702711 1/2" x 1/2" x 1" x 3" 4F WXL Carbide Corner Radius End Mill

  • Venice, Florida, United States
  • Jun 9th
SUPER SALE. iscar ec-b6 250-92c25-180 ic903

SUPER SALE. iscar ec-b6 250-92c25-180 ic903

  • ?????, Israel
  • Jun 9th
WIDIA Carbide Endmill Extended length 5/8" x 5/8" x2-1/2" x 5.25" .120Radius

WIDIA Carbide Endmill Extended length 5/8" x 5/8" x2-1/2" x 5.25" .120Radius

  • Vilonia, Arkansas, United States
  • Jun 9th
4" Dia INDEXABLE 1-1/16"ROUND INSERT FACEMILL for ROUGHING WITH 1 1/4" dia Shank

4" Dia INDEXABLE 1-1/16"ROUND INSERT FACEMILL for ROUGHING WITH 1 1/4" dia Shank

  • Hallandale, Florida, United States
  • Jun 9th
2 1/4" Dia ENDMILL WITH 2" dia Shank

2 1/4" Dia ENDMILL WITH 2" dia Shank

  • Hallandale, Florida, United States
  • Jun 9th
2 " Dia Ball MILL WITH 2" dia Shank- 6" cut lenth -10" long

2 " Dia Ball MILL WITH 2" dia Shank- 6" cut lenth -10" long

  • Hallandale, Florida, United States
  • Jun 9th
6 " Dia Shell MILL WITH 2" dia Hole and16 teeth with 3/4 wide slot

6 " Dia Shell MILL WITH 2" dia Hole and16 teeth with 3/4 wide slot

  • Hallandale, Florida, United States
  • Jun 9th
SGS #36793 3/4" x 3/4" x 15/16" x 5-1/2" 4F Carb AlTiN Corner Rounding End Mill

SGS #36793 3/4" x 3/4" x 15/16" x 5-1/2" 4F Carb AlTiN Corner Rounding End Mill

  • Venice, Florida, United States
  • Jun 9th
Micro 100 TEM-250-7 1/8 " Cut 1/2 "3FL Carbide End Mill

Micro 100 TEM-250-7 1/8 " Cut 1/2 "3FL Carbide End Mill

  • Venice, Florida, United States
  • Jun 9th

People who viewed this item also vieved

Keyway Broach Bushing Guide, Type F, 3 1/2" x 8", Uncollared, Used

Keyway Broach Bushing Guide, Type F, 3 1/2" x 8", Uncollared, Used

  • Tazewell, Virginia, United States
  • Jan 30th
Keyway Broach Bushing Guide, Type F, 4 1/4" x 7", Uncollared, Used

Keyway Broach Bushing Guide, Type F, 4 1/4" x 7", Uncollared, Used

  • Tazewell, Virginia, United States
  • Jan 30th
Sandvik machine tools

Sandvik machine tools

  • Caldwell, Idaho, United States
  • Jan 30th
(100PCS) CCMT 21.51 F1 2151 TP2500 SECO *** 100 INSERTS *** 10 FACTORY PACK

(100PCS) CCMT 21.51 F1 2151 TP2500 SECO *** 100 INSERTS *** 10 FACTORY PACK

  • Minneapolis, Minnesota, United States
  • Jan 30th
SNGA643 SP2 NTK SILICON NITRIDE CERAMIC TURNING INSERTS, price is for one insert

SNGA643 SP2 NTK SILICON NITRIDE CERAMIC TURNING INSERTS, price is for one insert

  • Johnson City, Tennessee, United States
  • Jan 30th
SNG434 HC1 NTK alumina white ceramic TURNING INSERTS, price is for one insert

SNG434 HC1 NTK alumina white ceramic TURNING INSERTS, price is for one insert

  • Johnson City, Tennessee, United States
  • Jan 30th
(6) CRITERION & OTHER MFG HSS BORING BARS w/ 3/4" SHANKS - 7/16" TO 1"

(6) CRITERION & OTHER MFG HSS BORING BARS w/ 3/4" SHANKS - 7/16" TO 1"

  • Chino, California, United States
  • Jan 30th
MACHINIST LATHE TOOLS NICE LOT OF 2 DIAMOND DRESSERS

MACHINIST LATHE TOOLS NICE LOT OF 2 DIAMOND DRESSERS

  • Lake Hiawatha, New Jersey, United States
  • Jan 30th
Round Die 1/4-20 UNC HSS 1/2" x 1-1/2" 23761 <Z99>

Round Die 1/4-20 UNC HSS 1/2" x 1-1/2" 23761 <Z99>

  • Saint Louis, Missouri, United States
  • Jan 30th
Round Die 5/16-18 UNC HSS 3/8&#034; x 1&#034; 23746 &lt;1920&gt;

Round Die 5/16-18 UNC HSS 3/8" x 1" 23746 <1920>

  • Saint Louis, Missouri, United States
  • Jan 30th
21 CM- CHK REAMER 3/8 x 7&#034; L (1pcs)

21 CM- CHK REAMER 3/8 x 7" L (1pcs)

  • Summit-Argo, Illinois, United States
  • Jan 30th
YANKEE -1/2 HSS USA ST FL SS JOB LGTH REAMER (1pcs)

YANKEE -1/2 HSS USA ST FL SS JOB LGTH REAMER (1pcs)

  • Summit-Argo, Illinois, United States
  • Jan 30th
Thurston HSS 2.200 x 0.026 x 1 Slitting Slotting Saw Blades

Thurston HSS 2.200 x 0.026 x 1 Slitting Slotting Saw Blades

  • Macks Creek, Missouri, United States
  • Jan 30th
DELTA 28-034 14-Inch Band Saw Blade 93-1/2-Inch by 1/4-Inch, 6 Teeth per Inch

DELTA 28-034 14-Inch Band Saw Blade 93-1/2-Inch by 1/4-Inch, 6 Teeth per Inch

  • Sioux City, Iowa, United States
  • Jan 30th
CUT OFF TOOL FOR B &amp; S. SCREW MACHINE. .100 WITH. I.D.=3/4

CUT OFF TOOL FOR B & S. SCREW MACHINE. .100 WITH. I.D.=3/4

  • Sedona, Arizona, United States
  • Jan 30th
IRWIN UNIBIT SPEED POINT 3 IN PACKAGE #10502 #1 #2 #3 NEW SHIP FAST

IRWIN UNIBIT SPEED POINT 3 IN PACKAGE #10502 #1 #2 #3 NEW SHIP FAST

  • Belleville, Illinois, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies