+ Post new Ad
Industrial work station for dust control from grinding, polishing, deburring., US $9,000.00 – Picture 0
Industrial work station for dust control from grinding, polishing, deburring., US $9,000.00 – Picture 0

Industrial Work Station For Dust Control From Grinding, Polishing, Deburring.

US $9,000.00

  • Santa Ana, California, United States
  • Aug 1st
Open on mobile:
QR code
.This is an industrial work station with a down draft dust control system designed to separate grinding, polishing, deburring dust particles from the work area via the high downdraft air flow powered by a 10hp 3ph motor. This station features four pre filters and four large dust filters. With a timer control; there is a reverse blast of air designed to clear the dust filters. These flushed particles drop into three containment drawers in the bottom that slide out and can be emptied. All filters are removable for extra cleaning on any maintenance schedule your company may have in place. Table size is 4'x8' via front table extension pockets. Made by Diversitech, with an original cost of $19000. Table has a low # of
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Installed and used only a short time, then placed in storage”

Directions

Similar products from Other Manufacturing Equipment & Tools

2 PCS HANDLE, MIDDLE HOLE 0.625" 5/8" DIA

2 PCS HANDLE, MIDDLE HOLE 0.625" 5/8" DIA

  • Oxnard, California, United States
  • Aug 2nd
3 PCS HANDLE, MIDDLE HOLE 0.625" 5/8" DIA

3 PCS HANDLE, MIDDLE HOLE 0.625" 5/8" DIA

  • Oxnard, California, United States
  • Aug 2nd
Ultra Pro Mini Mag G4 LE Level - Green

Ultra Pro Mini Mag G4 LE Level - Green

  • Miami, Florida, United States
  • Aug 2nd
7” Riser for Bridgeport Vertical Mill Milling Machine

7” Riser for Bridgeport Vertical Mill Milling Machine

  • Oxnard, California, United States
  • Aug 2nd
baileigh Exhaust Pipe bender

baileigh Exhaust Pipe bender

  • Palm Beach Gardens, Florida, United States
  • Aug 2nd
Southwire SIMpull T90 600 Volt Wire AWG 2 Copper THHN Cable 46 Ft Long Per Reel

Southwire SIMpull T90 600 Volt Wire AWG 2 Copper THHN Cable 46 Ft Long Per Reel

  • Watertown, Connecticut, United States
  • Aug 2nd
SCA Schucker part 22-21-54-00

SCA Schucker part 22-21-54-00

  • Athens, default, Greece
  • Aug 2nd
COOPER TOOLS 412775 SCREEN NEW IN BOX

COOPER TOOLS 412775 SCREEN NEW IN BOX

  • Detroit, Michigan, United States
  • Aug 2nd
Walter Flap Wheel For Aluminum 40grit 7” Package Of 10. Walter Part # 15-U704

Walter Flap Wheel For Aluminum 40grit 7” Package Of 10. Walter Part # 15-U704

  • Dundalk, Maryland, United States
  • Aug 2nd
Kitagawa M Series Non-Through Hole Cylinder – Actuator -P/N M1221HC21D

Kitagawa M Series Non-Through Hole Cylinder – Actuator -P/N M1221HC21D

  • Providence, Rhode Island, United States
  • Aug 2nd
Hypertherm Accustream Water only waterjet cutting head nozzle with extra orifice

Hypertherm Accustream Water only waterjet cutting head nozzle with extra orifice

  • Gainesville, Florida, United States
  • Aug 1st
11 Pounds Mixed Clean Scrap Copper - Metal Recycle - Junk Remelt Material

11 Pounds Mixed Clean Scrap Copper - Metal Recycle - Junk Remelt Material

  • Ukiah, California, United States
  • Aug 1st
2pcs ALUMINIUM ROUND TUBE 15mm OD x 500mm LONG 2mm WALL THICK

2pcs ALUMINIUM ROUND TUBE 15mm OD x 500mm LONG 2mm WALL THICK

  • china, China
  • Aug 1st
Orhmro 3 spoked wheel new

Orhmro 3 spoked wheel new

  • Lincoln, California, United States
  • Aug 1st
MGEHR1212-3 Lathe Cut-Off Grooving Parting Tool Holder + 10Pcs MGMN300 Insert

MGEHR1212-3 Lathe Cut-Off Grooving Parting Tool Holder + 10Pcs MGMN300 Insert

  • Dongguan, China
  • Aug 1st
TC 45X55X8 DOUBLE LIPS METRIC OIL / DUST SEAL 45mm X 55mm X 8mm WITH SPRING

TC 45X55X8 DOUBLE LIPS METRIC OIL / DUST SEAL 45mm X 55mm X 8mm WITH SPRING

  • Asheboro, North Carolina, United States
  • Aug 1st
TC 45X52X8 DOUBLE LIPS METRIC OIL / DUST SEAL 45mm X 52mm X 8mm WITH SPRING

TC 45X52X8 DOUBLE LIPS METRIC OIL / DUST SEAL 45mm X 52mm X 8mm WITH SPRING

  • Asheboro, North Carolina, United States
  • Aug 1st
TC 43X55X7 DOUBLE LIPS METRIC OIL / DUST SEAL 43mm X 55mm X 7mm WITH SPRING

TC 43X55X7 DOUBLE LIPS METRIC OIL / DUST SEAL 43mm X 55mm X 7mm WITH SPRING

  • Asheboro, North Carolina, United States
  • Aug 1st
TC 42X52X12 DOUBLE LIPS METRIC OIL / DUST SEAL 42mm X 52mm X 12mm WITH SPRING

TC 42X52X12 DOUBLE LIPS METRIC OIL / DUST SEAL 42mm X 52mm X 12mm WITH SPRING

  • Asheboro, North Carolina, United States
  • Aug 1st
MAXON SHUT OFF VALVE 1-1/2" 5000-0 351144

MAXON SHUT OFF VALVE 1-1/2" 5000-0 351144

  • Bucyrus, Ohio, United States
  • Aug 1st

People who viewed this item also vieved

Stainless Steel 304 Flat Bar 1/4" x 3" x 15.75"

Stainless Steel 304 Flat Bar 1/4" x 3" x 15.75"

  • Houston, Texas, United States
  • Jan 30th
Stainless Steel 304 Flat Bar 3/8" x 3" x 14.875"

Stainless Steel 304 Flat Bar 3/8" x 3" x 14.875"

  • Houston, Texas, United States
  • Jan 30th
FAST 3 DAY XRF-- ASSAY.YOUR SAMPLE for the ELEMENTS - GOLD- SILVER plus PT.GROUP

FAST 3 DAY XRF-- ASSAY.YOUR SAMPLE for the ELEMENTS - GOLD- SILVER plus PT.GROUP

  • Talent, Oregon, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies