insta lab for sale, brand-new and used.

This is a Mini-Circuits SSG-4000LH USB Synthesized Signal Generator. This generator has a frequency range of 250-4000Mhz with 5khz resolution. Output power is from -60 to +10dbm, with resolution of 0.25dbm.

This is an Agilent Keysight N7954A Dynamic DC Power Supply with options 760 Output disconnect relays, and 056 14585A Control and Analysis Software for Advanced Power Supplies The N7900 Series dynamic DC power supplies are designed for automated test equipment (ATE) applications where high-speed dynamic sourcing and measurement is needed.

This is an Agilent N3300A 1800W, 6-Slot Electronic Load Mainframe. We have TWO of these available, one per bid. Modules are not included, but available separately.

This is a Hioki IM3523 LCR Meter with a set of four terminal test leads. The Hioki IM3523 is a cost-effective LCR tester that provides high-performance and improved functionality; such as a wide-measurement of frequency range from 40 Hz to 200 kHz, high-speed measurement of up to 2 ms, and highly reliable measurement using the contact-check function. This LCR meter has a wide-range of applications — from production lines to research and development.

This is an Agilent 85046A S-Parameter Test Set with the included interconnect cables. The Agilent 85046A test set provides the capability to simultaneously measure the transmission and reflection characteristics of 50 ohm devices. The test set is controlled from the analyzer and includes programmable step attenuators.

This is an Agilent 8753C Network Analyzer with 006 (6Ghz Frequency Extension), and 010 (Time Domain). The splitter and cables shown are NOT included. The 8753C network analyzer provides excellent RF network measurements for lab and production test areas.

This is a BK Precision 1787B DC Power Supply. This power supply is rated for 0-72V, 0-1.5A. It's in great shape, and fully functional This unit has been fully checked in our lab and is guaranteed completely operational.

This is a Rohde Schwarz RTM1054 Digital Oscilloscope. This scope has 4-Channels, 500Mhz Bandwidth, and up to 5Gs/S sampling speed. We have two of these, each is identical and includes four RS-ZP10 500Mhz, 10:1 Probes, the carrying case, front cover, manual, and removable GPIB interface.

This is a Tektronix AWG5014 Arbitrary Waveform Generator. This unit is in great shape, works, BUT has an occasional data timing error on power up. The error typically only occurs when the unit has been unplugged and is powered on.

This is a Stanford Research model FS725 Rubidium Frequency Standard. The FS725 integrates a rubidium oscillator (SRS model PRS10), a low noise universal AC power supply, and distribution amplifiers in a compact half-width 2U chassis. It provides stable and reliable performance, with an estimated 20 year aging of less than 5 x 10-9 and a demonstrated rubidium oscillator MTBF of over 200,000 hours.

This is an Agilent Keysight 11940A Close Field Probe. The Agilent 11940A is a hand-held probe specially designed to measure magnetic field radiation from surface currents, slots, cable, and ICs for EMC diagnostic and troubleshooting measurements. Its unique design results in a high level of electric field rejection.

This is a Chroma 62100H-600S High Performance DC Power Supply with Solar Simulation. Chroma's new 62000H Series of programmable DC Power Supplies offer many unique advantages for telecom, automated test system & integration, industrial, battery charge & simulation for hybrid cars and solar panel simulation.

This is a Keithley 2700 Data Acquisition Mainframe with an installed 7705 40-Channel Module. The Keithley 2700 is a cost-effective, high performance test platforms offer affordable alternatives to separate digital multimeters and switch systems, dataloggers/recorders, plug-in card data acquisition equipment, and VXI/PXI systems. The Integra Series plug-in switching and control modules offer unmatched flexibility and testing efficiency for a wide range of industries and applications.

This is a Kepco ABC10-10DM Digital Power Supply. This supply has a 0-10V, 0-10A, 100W Output range, and is GPIB Programmable. This unit has been fully checked in our lab and is guaranteed completely operational.

This is an Agilent 6012B DC Power Supply. This supply can output 0-60V, 0-50A, and up to 1200W Power. This unit has been fully checked in our lab and is guaranteed completely operational.

This is a Teledyne Lecroy SDA-813Zi Serial Data Analyzer. This is a 13Ghz, 4-Channel scope, with up to 40Gsa/S sampling rate. See pictures for options and processor and memory information.

This is a TDK Lambda GEN80-19 Programmable DC Power Supply w/IEEE.

This is an Agilent Keysight 11715A AM/FM Test Source. The Agilent 11715A AM/FM test source provides very flat, wide-bandwidth, and low-distortion amplitude - or frequency-modulated RF signals. Designed primarily for performance tests and adjustments of the Agilent 8901A/B modulation analyzer and Agilent 8902A measuring receiver, it will also serve as a high-quality modulated test oscillator where its frequency ranges apply.

This is an Agilent V85104A V-Band Millimeter Wave S-Parameter Test Set with the 85105A Controller. This is the main system components of an Agilent 85106D Banded Millimeter Wave Network Analyzer System. When paired with an 8510C and system sources, this give you full S-Parameter Measurement Capability in the 50-75Ghz V-Band in waveguide.

This is a Teledyne Lecroy SPARQ-4004E Signal Integrity Network Analyzer with the included accessory kit. A TDR/TDT-based analyzer that measures 40GHz, 4port S-parameters with a single button. Fully calibrated measurements can be made in minutes, and without any need to connect or disconnect cables to calibration kit standards or electronic calibration modules.