insta lab for sale, brand-new and used.

This is an HP 8508A Vector Voltmeter with an 85082A 300khz-2Ghz Input Module. The Agilent 8508A vector voltmeter is a fully automatic tuned receiver that makes RF voltage and phase measurements easy. Its narrowband measuring technique gives a dynamic range of over 90 dB and a sensitivity of 10 micro V to trace even the smallest signal.

This is an Agilent 70300A RF Tracking Generator for the 70K/MMS Series Spectrum Analyzers. An Agilent 70300A RF tracking generator adds stimulus-response measurements to an Agilent 70000 series spectrum analyzer, enabling accurate characterization of gain, frequency response, isolation, and return loss. The wide dynamic range makes accurate measurements of filter rejection and switch isolation without the need for time-consuming

This is an Agilent 70000 Series Spectrum Analyzer, fully configured and tested. This system has a frequency range of 100hz-26.5Ghz, and consists of the following system components: Agilent 70004A Color Display and Mainframe Agilent 70001A Mainframe Agilent 70900B Local Oscillator Agilent 70902A IF Module Agilent 70903A IF Module Agilent 70909A RF Section, 100hz-26.5Ghz, with external mixer capability Agilent 70310A Precision Timebase, with attached power

This is an Agilent 81104A Pulse/Pattern Generator with two 81105A Output cards installed. The Agilent 81104A 80 MHz Pulse Pattern Generator with one or two Agilent 81105A output modules (single-/dual-channel) builds on the performance of the 81101A and is backward-compatible. The 81104A extends the frequency range and adds RZ/NRZ pattern capability up to 16 kbit per channel.

This is an Agilent 11974A Preselected RF Section. The Agilent 11974A mixer is preselected from 26.5 to 40 GHz to eliminate the need for signal identification. Preselection reduces mixer overload from broadband signals and reduces the interaction of local oscillator harmonics with the device under test.

This is a Keysight 16089A Kelvin Clip Lead Set. The 16089A makes it possible to measure odd-shaped components that cannot be measured with conventional fixtures. It is equipped with two insulated Kelvin clips.

This is a Clarke Hess 2505 Multi-Function Gain Phase Analyzer. The Model 2505 is a multi-function instrument which is ideal for users that must make a large variety of sophisticated measurements. A single package, contains a Gain Phase Analyzer (Frequency Response Analyzer), Phase Angle Voltmeter with a null detector, Function Generator, Pulse Generator, Spectrum Analyzer, Digital Sampling Oscilloscope, Wattmeter, Phase Meter and Complex Impedance Bridge.

This is an Agilent Keysight E4980A Precision LCR Meter with option 002 Bias Current Interface. This unit has the following features: Frequency 20 Hz to 2 MHz, with 4-digit resolution in any range Basic accuracy 0.05% basic accuracy with superior measurement repeatability at low and high impedance More features High-speed measurements: 5.6 ms 201 points list sweep Versatile PC connectivity (LAN, USB and GPIB) The E4980A precisio

This is a Hakko 851 Hot Air Station. This unit is guaranteed operational. High bidder to pay $30 S&H if within the USA.

This is a Hakko 936 Soldering Station with a 907 Soldering Iron. A soldering iron stand is not provided. Features: Power Consumption: 110V 60W

This is a Stanford Research FS710 Distribution Amplifier. We have EIGHT of these available, one per bis. For installations which require many 10 MHz outputs at a remote location from the source, the FS710 AGC Distribution Amplifier offers seven independent outputs from one input.

This is a Hakko 852 Hot Air Station comes with A-1124 tip. Features:

This is a Hakko 850D Hot Air Station. Features: • digital temperature display

This is a Hakko FR-802 Digital Hot Air Station. The FR-802 is a digital SMD Rework Station equipped with digital LED temperature display, a

This is a JBC DI 3000 Solder Station with a PA 8110 Stand and PA 1200 Hot Micro Tweezers. This unit allows you to connect 2 tools, work with one tool and have the other tool in its stand at "sleep" temperature. To switch just place one tool in its stand and take out the other.

This is a Loctite 97006 Digital Syringe Dispenser. It dispenses Loctite adhesive products packaged in 10, 30, 55, and 300 ml. syringes.

This is a Hakko 851 Hot Air Station and comes with one nozzle. Units are guaranteed operational. High bidder to pay $30

This is a Stanford Research DS345 Synthesized Function Generator with Opt 1. Features:

This is a Stanford Research DS345 Synthesized Function Generator, 1 µHz to 30.2 MHz with option 1 and opti