+ Post new Ad
Intelligent Motion Systems IMS Microstepping Driver -- IM805 -- New Old Stock 7A, US $175.99 – Picture 0
Intelligent Motion Systems IMS Microstepping Driver -- IM805 -- New Old Stock 7A, US $175.99 – Picture 0

Intelligent Motion Systems Ims Microstepping Driver -- Im805 -- New Old Stock 7a

US $175.99

  • Madison, Wisconsin, United States
  • Aug 2nd
Open on mobile:
QR code
Intelligent Motion Systems IMS Microstepping Driver IM805 New 24-75 volt input 1-7Amps peak per phase, 5A RMS From the Manufacturer: FEATURES • Low Cost • Extremely Small (2.7 x 3.0 x 1.3 inches) (69.9 x 76.2 x 33 mm) • Pin and Footprint Compatible with the IM483 • High Input Voltage (+75 V) • High Output Current (5 Amps RMS, 7 Amps Peak) • Advanced Surface Mount and ASIC Technology • Designed for High Per for mance, Low Inductance Motors • Single Supply • Up to 10 MHz Step Clock Rate • Opto-Isolated Inputs • Fault Output • Short Circuit Protection • Up to 51,200 Steps/Rev • 14 Selectable Microstepping Resolutions May Be Changed On-The-Fly Without Loss of Motor Position • 20 kHz Chopping Rate • Automatically Switches Between Slow and Fast Decay for Un matched Performance • Adjustable Automatic Current Re duc tion • At Full Step Output • Fault and Power LEDs This product has been discontinued. The IM805 is a high performance, yet low cost microstepping driver that utilizes surface mount ASIC technology. The IM805 is small, easy to interface and use, yet powerful enough to handle the most demanding applications. The IM805 has 14 built-in microstep resolutions (both binary and decimal). The resolution can be changed at any time without the need to reset the driver. This feature allows the user to rapidly move long distances, yet precisely position the motor at the end of travel without the expense of high performance controllers. With the development of proprietary and patented circuits, ripple current has been minimized to reduce motor heating common with other designs, allowing the use of low inductance motors to improve high speed performance and system efficiency. The IM805, because of its small size and low cost, can be used to increase accuracy and smoothness in systems using higher step angle motors. In many instances mechanical gearing can be replaced with microstepping, reducing cost and eliminating potential maintenance.
“New old stock, purchased for testing but was never used/tested/installed”
Brand Intelligent Motion Systems IMS
MPN IM805
Model IM805

Directions

Similar products from Stepper Motor Driver Boards & Modules

GRBL 2-Axis Control Board USB Port CNC Engraving Machine Control Board +OfflinQ7

GRBL 2-Axis Control Board USB Port CNC Engraving Machine Control Board +OfflinQ7

  • Shenzhen, China
  • Aug 2nd
AMCI Stepper Driver  SD7540A Advanced Micro Controls 24-75Vdc 4. Amps

AMCI Stepper Driver  SD7540A Advanced Micro Controls 24-75Vdc 4. Amps

  • Bristol, Pennsylvania, United States
  • Aug 2nd
ORIENTAL MOTOR CSD5814N-T, 5-PHASE STEPPER DRIVER, AMAT 0870-01028

ORIENTAL MOTOR CSD5814N-T, 5-PHASE STEPPER DRIVER, AMAT 0870-01028

  • West Palm Beach, Florida, United States
  • Aug 2nd
DM556 Digital Stepper Motor Driver 2-Phase 5.6A for 57 86 Stepping Motor

DM556 Digital Stepper Motor Driver 2-Phase 5.6A for 57 86 Stepping Motor

  • ShenZhen, China
  • Aug 2nd
DM556 Digital Stepper Motor Driver 2-Phase 5.6A for 57 86 Stepping Motor #JD

DM556 Digital Stepper Motor Driver 2-Phase 5.6A for 57 86 Stepping Motor #JD

  • ShenZhen, China
  • Aug 2nd
30 Holes Plastic Nail Drill Bit Storage Box Empty Stand Holder Container W4E HB

30 Holes Plastic Nail Drill Bit Storage Box Empty Stand Holder Container W4E HB

  • Shanghai, China
  • Aug 2nd
Parker Compumotor A/AX57-51 Stepper Motor New

Parker Compumotor A/AX57-51 Stepper Motor New

  • Buffalo, New York, United States
  • Aug 2nd
Pacific Scientific Danaher Motion 6410-030-N-N-N Stepper Drive NEW

Pacific Scientific Danaher Motion 6410-030-N-N-N Stepper Drive NEW

  • Buffalo, New York, United States
  • Aug 2nd
Parker CompuMotor OEM750 Stepper Motor Driver7.5A 75V BRAND NEW

Parker CompuMotor OEM750 Stepper Motor Driver7.5A 75V BRAND NEW

  • Madison, Wisconsin, United States
  • Aug 2nd
NOS Gecko drive CNC G540 Stepper Driver Router Milling Plasma !Charity!

NOS Gecko drive CNC G540 Stepper Driver Router Milling Plasma !Charity!

  • Madison, Wisconsin, United States
  • Aug 2nd
DMA860H Stepper Motor Driver, Two-Phase 86 Stepper Motor Driver, for 3D PrinteU7

DMA860H Stepper Motor Driver, Two-Phase 86 Stepper Motor Driver, for 3D PrinteU7

  • Shenzhen, China
  • Aug 2nd
L9110S H-bridge Stepper MotorDual DC Motor Driver Controller Board For ArduiR HO

L9110S H-bridge Stepper MotorDual DC Motor Driver Controller Board For ArduiR HO

  • Shanghai, China
  • Aug 1st
L9110S H-bridge Stepper MotorDual DC Motor Driver Controller Board For ArduiR FD

L9110S H-bridge Stepper MotorDual DC Motor Driver Controller Board For ArduiR FD

  • Shanghai, China
  • Aug 1st
L9110S H-bridge Stepper MotorDual DC Motor Driver Controller Board For ArduiR QW

L9110S H-bridge Stepper MotorDual DC Motor Driver Controller Board For ArduiR QW

  • Shanghai, China
  • Aug 1st
MPU-9150 9DOF 3 Axis Gyroscope+Accelerometer+Magnetic Field Replace MPU-6050

MPU-9150 9DOF 3 Axis Gyroscope+Accelerometer+Magnetic Field Replace MPU-6050

  • Shenzhen, China
  • Aug 1st
NEW Yako YKA2811MA Stepping Motor Driver

NEW Yako YKA2811MA Stepping Motor Driver

  • South El Monte, California, United States
  • Aug 1st
Superior Electric Slo-Syn Indexer Motor Drive 440-EPI USED

Superior Electric Slo-Syn Indexer Motor Drive 440-EPI USED

  • Jenison, Michigan, United States
  • Aug 1st
TB6600 Digital Stepper motor driver 2 phase 5.6A - US SELLER

TB6600 Digital Stepper motor driver 2 phase 5.6A - US SELLER

  • Columbia, South Carolina, United States
  • Aug 1st
2A USB Booster Board DC-DC Step-up Module 2-24V input Boost To 5-28V

2A USB Booster Board DC-DC Step-up Module 2-24V input Boost To 5-28V

  • Shenzhen, China
  • Aug 1st
CNC Single Axis TB6600 4A Two Phase Stepper Motor Driver Board Controller

CNC Single Axis TB6600 4A Two Phase Stepper Motor Driver Board Controller

  • Shenzhen, China
  • Aug 1st

People who viewed this item also vieved

Nematron Touch Screen Work Station IC1F6-C431A501

Nematron Touch Screen Work Station IC1F6-C431A501

  • Kearney, Missouri, United States
  • Jan 29th
Lot of 3!!! TELEMECANIQUE CA3DN31, CA3DN40 & CA3DN22 Motor Starter Contactor.

Lot of 3!!! TELEMECANIQUE CA3DN31, CA3DN40 & CA3DN22 Motor Starter Contactor.

  • Brighton, Michigan, United States
  • Jan 29th
Vexta PMM33bh2-C16 ,Oriental Motor

Vexta PMM33bh2-C16 ,Oriental Motor

  • seoul, seoul, Korea, South
  • Jan 29th
5pcs Stepper Motor+ Driver Board ULN2003 5V 4-phase 5 line

5pcs Stepper Motor+ Driver Board ULN2003 5V 4-phase 5 line

  • Shenzhen, China
  • Jan 29th
Pepperl+Fuchs - 34784 - Isolated Switch Amplifier 2 Channel 24VDC KFD2-SR-Ex2

Pepperl+Fuchs - 34784 - Isolated Switch Amplifier 2 Channel 24VDC KFD2-SR-Ex2

  • San Ramon, California, United States
  • Jan 29th
Telemecanique LADN31 Inst. Contact Block

Telemecanique LADN31 Inst. Contact Block

  • Taguig City, Philippines
  • Jan 29th
TLV Motor Reducing Valve, Model MC-2 ~ NEW NEVER USED ~

TLV Motor Reducing Valve, Model MC-2 ~ NEW NEVER USED ~

  • Carbondale, Pennsylvania, United States
  • Jan 29th
110V AC 120W Speed Controller Unit for Motor Control Switch

110V AC 120W Speed Controller Unit for Motor Control Switch

  • DongGuan, China
  • Jan 29th
GE VAT200 Variable Speed Drive Keypad

GE VAT200 Variable Speed Drive Keypad

  • Middlebury, Indiana, United States
  • Jan 29th
GE VAT200 U203X01K5FS Variable Speed 3PH 480V 2HP Drive w/EMC Filter

GE VAT200 U203X01K5FS Variable Speed 3PH 480V 2HP Drive w/EMC Filter

  • Middlebury, Indiana, United States
  • Jan 29th
KB ELECTRONICS, PENTA POWER, KBE2-2150-P, AC DRIVE; 230VAC INPUT 1/2HP; NEW

KB ELECTRONICS, PENTA POWER, KBE2-2150-P, AC DRIVE; 230VAC INPUT 1/2HP; NEW

  • Mebane, North Carolina, United States
  • Jan 29th
MINARIK CORPORATION XL3025A-Q-051 SPEED CONTROLLER

MINARIK CORPORATION XL3025A-Q-051 SPEED CONTROLLER

  • george town, penang, Malaysia
  • Jan 29th
INTELLIGENT MOTION SYSTEMS IM 483I DRIVER

INTELLIGENT MOTION SYSTEMS IM 483I DRIVER

  • george town, penang, Malaysia
  • Jan 29th
Dart Controls Inc 251G-12E DC Motor Controller

Dart Controls Inc 251G-12E DC Motor Controller

  • Ferrysburg, Michigan, United States
  • Jan 29th
NEW SQUARE D 2510KG6 MOTOR STARTER SWITCH

NEW SQUARE D 2510KG6 MOTOR STARTER SWITCH

  • Milton Freewater, Oregon, United States
  • Jan 29th
GE IEC Starter & Overload Relay CL00A310T / RT1C0.25-0.41A #70

GE IEC Starter & Overload Relay CL00A310T / RT1C0.25-0.41A #70

  • Mulino, Oregon, United States
  • Jan 29th
Antique! Cutler Hammer Motor Control Metal Box HEAVY DUTY Vintage Start Electric

Antique! Cutler Hammer Motor Control Metal Box HEAVY DUTY Vintage Start Electric

  • Ottertail, Minnesota, United States
  • Jan 29th
LOT 5 ALLEN BRADLEY 709-BOD SIZE 0 110/120V MOTOR STARTER 18A AMP 600V B352802

LOT 5 ALLEN BRADLEY 709-BOD SIZE 0 110/120V MOTOR STARTER 18A AMP 600V B352802

  • Buffalo, New York, United States
  • Jan 29th
SQUARE D 8538-SFG13 COMBO MOTOR STARTER SWITCH ENCLOSURE SIZE4 200A 600V B203511

SQUARE D 8538-SFG13 COMBO MOTOR STARTER SWITCH ENCLOSURE SIZE4 200A 600V B203511

  • Buffalo, New York, United States
  • Jan 29th
Cutler-Hammer Contact Block -- 10250T3 -- New

Cutler-Hammer Contact Block -- 10250T3 -- New

  • San Jose, California, United States
  • Jan 29th
New surplus Allen Bradley 100S-C09D14C safety contactor 600v Guardmaster

New surplus Allen Bradley 100S-C09D14C safety contactor 600v Guardmaster

  • Golden, Colorado, United States
  • Jan 29th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies