+ Post new Ad
Interstate 10" x 12" 90 deg Swivel Angle Table, US $1200 – Picture 0
Interstate 10" x 12" 90 deg Swivel Angle Table, US $1200 – Picture 1
Interstate 10" x 12" 90 deg Swivel Angle Table, US $1200 – Picture 2
Interstate 10" x 12" 90 deg Swivel Angle Table, US $1200 – Picture 3
Interstate 10" x 12" 90 deg Swivel Angle Table, US $1200 – Picture 4
Interstate 10" x 12" 90 deg Swivel Angle Table, US $1200 – Picture 0
Interstate 10" x 12" 90 deg Swivel Angle Table, US $1200 – Picture 1
Interstate 10" x 12" 90 deg Swivel Angle Table, US $1200 – Picture 2
Interstate 10" x 12" 90 deg Swivel Angle Table, US $1200 – Picture 3
Interstate 10" x 12" 90 deg Swivel Angle Table, US $1200 – Picture 4

Interstate 10" X 12" 90 Deg Swivel Angle Table

US $1200

  • Venice, Florida, United States
  • Jun 9th
Open on mobile:
QR code
INTERSTATE Angle Table Type Angle Table Table Width (Inch) 10 Table Length (Inch) 12 Swivels (Yes/No) Yes Minimum Tilt Angle ( ) 0.00 Maximum Tilt Angle ( ) +90.00 T-Slot Width (Inch) 1/2 Overall Width (Inch) 10 Overall Height (Inch) 8   Model # 00154047 MSRP: $400   Item is listed as "used" due the damage the table received during shipping and transit. The chipped pieces will be included, in the case that you want to repair the table. Comes as shown in pictures.   Shipping Weight: 80 Lbs. Shipping Dimensions: 16" D x 12" L x 11" W    Dustin / 9.20.13 / P 23 F / 23447 DP 9/23/15 inkFrog Analytics
“Item is listed as "used" due the damage the table received during shipping and transit. The chipped pieces will be included, in the case that you want to repair the table. Comes as shown in pictures.”
Manufacturer Interstate
MPN 00154047
Country/Region of Manufacture Unknown
MSRP 400
Brand INTERSTATE
Location P 23 F / 23447
Model 00154047
UPC Does not apply

Directions

Similar products from Fittings & Plates

SUBURBAN PAW-080808 Machined Angle Plate

SUBURBAN PAW-080808 Machined Angle Plate

  • Duncan, South Carolina, United States
  • Jun 9th
YUASA 550-004 Horizontal/Vertical 5C Collet Indexe

YUASA 550-004 Horizontal/Vertical 5C Collet Indexe

  • Duncan, South Carolina, United States
  • Jun 9th
SUBURBAN SM-5C 5C SPIN MASTER INDEX FIXTURE

SUBURBAN SM-5C 5C SPIN MASTER INDEX FIXTURE

  • Duncan, South Carolina, United States
  • Jun 9th
CLAMP-TITE 8L300 Collars & Couplings

CLAMP-TITE 8L300 Collars & Couplings

  • Duncan, South Carolina, United States
  • Jun 9th
BISON 7-878-129F Cast-Iron Fully Machined Adapter (Back Plate), Chuck Size: 12'

BISON 7-878-129F Cast-Iron Fully Machined Adapter (Back Plate), Chuck Size: 12'

  • Duncan, South Carolina, United States
  • Jun 9th
BISON 7-879-123 Cast-Iron Fully Machined Adapter (Back Plate), Chuck Size: 12'

BISON 7-879-123 Cast-Iron Fully Machined Adapter (Back Plate), Chuck Size: 12'

  • Duncan, South Carolina, United States
  • Jun 9th
BISON 7-870-112 Rough Casting Adapter for 3 Jaw Self-Centering 12' Chuck, For C

BISON 7-870-112 Rough Casting Adapter for 3 Jaw Self-Centering 12' Chuck, For C

  • Duncan, South Carolina, United States
  • Jun 9th
CLAMP-TITE 8A200 Collars & Couplings

CLAMP-TITE 8A200 Collars & Couplings

  • Duncan, South Carolina, United States
  • Jun 9th
Suburban Combination Sine Plate & Magnetic Chuck

Suburban Combination Sine Plate & Magnetic Chuck

  • Atlanta, Georgia, United States
  • Jun 9th
4"x4" Magna sine XLO-Robbins B3 Magnetic Machine Tool Holder X

4"x4" Magna sine XLO-Robbins B3 Magnetic Machine Tool Holder X

  • Cornell, Illinois, United States
  • Jun 9th
CNC milling machine subplate Stevens Engineering 27.5 x 20.5 x 1.5" Chick type?

CNC milling machine subplate Stevens Engineering 27.5 x 20.5 x 1.5" Chick type?

  • Perry, Ohio, United States
  • Jun 9th
Vintage Angle Plate & Solid Square Tool Maker Made

Vintage Angle Plate & Solid Square Tool Maker Made

  • Yorktown, Indiana, United States
  • Jun 9th
21A.CAT40.63-3543 CAT Modular Arbor Kilowood Mfg Direct

21A.CAT40.63-3543 CAT Modular Arbor Kilowood Mfg Direct

  • Ontario, California, United States
  • Jun 9th
21B.63/63-125 Modular Extension Kilowood Mfg Direct

21B.63/63-125 Modular Extension Kilowood Mfg Direct

  • Ontario, California, United States
  • Jun 9th
CAT40-TE1250-4000 G2.5 15000rpm Shrink Fit Toolholder Kilowood Mfg Direct

CAT40-TE1250-4000 G2.5 15000rpm Shrink Fit Toolholder Kilowood Mfg Direct

  • Ontario, California, United States
  • Jun 9th
6" Drive Plate with D1-3 Cam Lock Mount, from EE Monarch Tool Room Lathe

6" Drive Plate with D1-3 Cam Lock Mount, from EE Monarch Tool Room Lathe

  • Rocky Point, New York, United States
  • Jun 9th
BT40-TE12-90 G6.3 15000rpm Shrink Fit Toolholder Kilowood Mfg Direct

BT40-TE12-90 G6.3 15000rpm Shrink Fit Toolholder Kilowood Mfg Direct

  • Ontario, California, United States
  • Jun 9th
5" diameter chuck mounting plate with L-00 Mounting, from 12" Clausing Lathe

5" diameter chuck mounting plate with L-00 Mounting, from 12" Clausing Lathe

  • Rocky Point, New York, United States
  • Jun 9th
8" diameter drive plate with L-1 mounting, from 15" LeBlond Tool Room Lathe

8" diameter drive plate with L-1 mounting, from 15" LeBlond Tool Room Lathe

  • Rocky Point, New York, United States
  • Jun 9th
CAT40-ER40-2750 G6.3 10000rpm ER Collet Chucks Kilowood Mfg Direct

CAT40-ER40-2750 G6.3 10000rpm ER Collet Chucks Kilowood Mfg Direct

  • Ontario, California, United States
  • Jun 9th

People who viewed this item also vieved

2 Small V blocks

2 Small V blocks

  • North Branford, Connecticut, United States
  • Jan 30th
MACHINIST LATHE TOOL ANGLE BLOCK 4" X 4" X 3"

MACHINIST LATHE TOOL ANGLE BLOCK 4" X 4" X 3"

  • Lake Hiawatha, New Jersey, United States
  • Jan 30th
EJ DIAMOND DRESSING WHEEL OSA EN 13236 2.35" BOLT PATTERN (LOC1235B) TS12

EJ DIAMOND DRESSING WHEEL OSA EN 13236 2.35" BOLT PATTERN (LOC1235B) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
MT3 Multi-Purpose Live Center Set w. 7 Interchangeable Points- NEW

MT3 Multi-Purpose Live Center Set w. 7 Interchangeable Points- NEW

  • Madison Heights, Michigan, United States
  • Jan 30th
ROYAL CNC MT6 PRECISION LONG SPINDLE LIVE CENTER

ROYAL CNC MT6 PRECISION LONG SPINDLE LIVE CENTER

  • Greensboro, North Carolina, United States
  • Jan 30th
J.C. Glenzer Co 9" lathe live center 1.15" dia.-1.230" dia. tapered shank

J.C. Glenzer Co 9" lathe live center 1.15" dia.-1.230" dia. tapered shank

  • DeKalb, Illinois, United States
  • Jan 30th
Brand New Toolmex Bison Bial 12.5" 3 Jaw A1-8 Mount Lathe Chuck 7-801-1218 753SO

Brand New Toolmex Bison Bial 12.5" 3 Jaw A1-8 Mount Lathe Chuck 7-801-1218 753SO

  • Montville, Ohio, United States
  • Jan 30th
MACHINIST TOOLS LATHE 6" 4 Jaw Lathe Chuck for South Bend Logan Atlas 1 1/2" BR

MACHINIST TOOLS LATHE 6" 4 Jaw Lathe Chuck for South Bend Logan Atlas 1 1/2" BR

  • Morris Plains, New Jersey, United States
  • Jan 30th
6" SCROLLING 6 JAW LATHE CHUCK W/ PLAIN BACK MOUNT

6" SCROLLING 6 JAW LATHE CHUCK W/ PLAIN BACK MOUNT

  • Chino, California, United States
  • Jan 30th
(1) Armstrong Heavy duty "C" clamp 78-030- Very Nice / New!!

(1) Armstrong Heavy duty "C" clamp 78-030- Very Nice / New!!

  • Jackson, Tennessee, United States
  • Jan 30th
New Red 102B 180Kg 397 Lbs Holding Capacity U Shape Bar Vertical Toggle Clamp

New Red 102B 180Kg 397 Lbs Holding Capacity U Shape Bar Vertical Toggle Clamp

  • Shenzhen, China
  • Jan 30th
Carr Lane CL-250-PA Latch Clamp

Carr Lane CL-250-PA Latch Clamp

  • Vancouver, Washington, United States
  • Jan 30th
COLLIS TOOL CORP. "V"Flange CNC #40-45-50 Taper Collet Chuck Length 7"

COLLIS TOOL CORP. "V"Flange CNC #40-45-50 Taper Collet Chuck Length 7"

  • Flushing, New York, United States
  • Jan 30th
EAGLE ROCK 5C Collet Holder - Size: 2"

EAGLE ROCK 5C Collet Holder - Size: 2"

  • Flushing, New York, United States
  • Jan 30th
PROCUNIER Tension Tap Holder - Model: 57410

PROCUNIER Tension Tap Holder - Model: 57410

  • Flushing, New York, United States
  • Jan 30th
Schaublin W20 Collet 2.25 MM W-20 102 Lathe

Schaublin W20 Collet 2.25 MM W-20 102 Lathe

  • Millstone Township, New Jersey, United States
  • Jan 30th
KENNAMETAL/ERICKSON 5/8 TG-100 COLLET

KENNAMETAL/ERICKSON 5/8 TG-100 COLLET

  • Wadley, Alabama, United States
  • Jan 30th
6 Hardinge S22-E Collet Pads

6 Hardinge S22-E Collet Pads

  • Millstone Township, New Jersey, United States
  • Jan 30th
One Index Plate with Handle Setup 5 in. (Inv. 27163)

One Index Plate with Handle Setup 5 in. (Inv. 27163)

  • Portland, Connecticut, United States
  • Jan 30th
Two sided Index Plate 5 5/16 in.(Inv. 27161)

Two sided Index Plate 5 5/16 in.(Inv. 27161)

  • Portland, Connecticut, United States
  • Jan 30th
One Lot of 3 Index Plates 5 1/8 in. (Inv. 27160)

One Lot of 3 Index Plates 5 1/8 in. (Inv. 27160)

  • Portland, Connecticut, United States
  • Jan 30th
PHASE II Adjustable Tailstock for 8" & 10"

PHASE II Adjustable Tailstock for 8" & 10"

  • Flushing, New York, United States
  • Jan 30th
New MAG Rotary Table 05 1220 9000 0512209000 Type ATU 400 Peiseler 28690 119:2

New MAG Rotary Table 05 1220 9000 0512209000 Type ATU 400 Peiseler 28690 119:2

  • Hamilton, Ohio, United States
  • Jan 30th
New Mag Rotary Table 05-1240-9000

New Mag Rotary Table 05-1240-9000

  • Hamilton, Ohio, United States
  • Jan 30th
Tool Grinder Jig for Sharpening Lathe tools HowTo build PLANS

Tool Grinder Jig for Sharpening Lathe tools HowTo build PLANS

  • Diamond Point, New York, United States
  • Jan 30th
Antique Old Yankee No 1991 North Bros MFG Co Machinists Small Metalworking Vise

Antique Old Yankee No 1991 North Bros MFG Co Machinists Small Metalworking Vise

  • Gap, Pennsylvania, United States
  • Jan 30th
Universal Work Stop For Milling/Machine Vise-New

Universal Work Stop For Milling/Machine Vise-New

  • Chino, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies