+ Post new Ad
Irwin 1908 ZR 1-1/4" -11-1/2 NPT Taper Pipe Tap Thread Cutting Cleaning USA Made, US $340 – Picture 0
Irwin 1908 ZR 1-1/4" -11-1/2 NPT Taper Pipe Tap Thread Cutting Cleaning USA Made, US $340 – Picture 0

Irwin 1908 Zr 1-1/4" -11-1/2 Npt Taper Pipe Tap Thread Cutting Cleaning Usa Made

US $340

  • Denver, Colorado, United States
  • Jun 12th
Open on mobile:
QR code
International buyers must pay their own local duties. We do not mark international parcels as gift. IF YOU HAVE QUESTIONS CALL 1-800-748-1945 PAYPAL PREFERRED - OR- PAY BY PHONE WITH Please do not leave negative or neutral feedback or low 1&2 DSR ratings. We always take care of problems to the best of our ability. Call or e-mail us! Your 100% satisfaction is our goal! NEW STOCK Irwin Industrial 1908ZR 1-1/4"- 11-1/2 NPT Taper 1-1/4" Carbon Steel Pipe Tap . Use for either cutting new threads or chasing (cleaning up) old threads in mild steel, light gage stainless, soft metals ,and plastic .Overall length 4". Use a 1-31/64" drill bit when cutting new threads. Made in USA. All sales final. Free shipping offer applies to US 48 States with street addresses only.  No refunds or exchanges. Cutting tools such as this are NOT guaranteed against breakage. Notice- If you have not worked with NPT or IP size pipe or fittings before, be aware that 1-1/4" pipe does NOT measure 1-1/4" !! You can NOT measure your pipe or fittings with a tape measure and get the right size tap! Pipe sizes do not refer to any physical dimensions. The outside diameter of a pipe or fitting must be measured and compared to a sizing chart for size identification. The outside diameter of 1-1/4" pipe is 1.66" (approx 1-21/32") and this tap will be about the same size. If you have questions feel free to ask. We will try our best to help you .We do not offer returns on taps and dies.  DESCRIPTION Type : Carbon steel 1-1/4" -11-1/2 NPT Taper Pipe tap  Used for cutting new or cleaning up old threads. Use in mild steel, light gage stainless , other soft metals or plastic ALL SALES FINAL. NO REFUND NO RETURNS AND NO EXCHANGES  These taps and/or dies are made, sold and distributed by Irwin Industrial Corp,  but are labeled with their trade name HANSON.  

Directions

Similar products from Taper Pipe Taps

NOS MORSE 1 1/4"- 11 1/2" 4 R.H. NPT H-S PIPE TAP

NOS MORSE 1 1/4"- 11 1/2" 4 R.H. NPT H-S PIPE TAP

  • Lawrence, Michigan, United States
  • Jun 14th
3/4-14 NPS Tap, HSS, USA

3/4-14 NPS Tap, HSS, USA

  • Sahuarita, Arizona, United States
  • Jun 14th
JARVIS 3/8" X 18 TAPERED PIPE TAP HS G NEW USA NPT

JARVIS 3/8" X 18 TAPERED PIPE TAP HS G NEW USA NPT

  • Levittown, Pennsylvania, United States
  • Jun 14th
(#5288C) New USA Made Regular Thread 2 X 11-1/2 NPS Straight Pipe Tap

(#5288C) New USA Made Regular Thread 2 X 11-1/2 NPS Straight Pipe Tap

  • Warren, Michigan, United States
  • Jun 14th
Ridgid 2" NPT Pipe Thread Tap USA Made

Ridgid 2" NPT Pipe Thread Tap USA Made

  • Sparta, Tennessee, United States
  • Jun 14th
2 -11 1/2 NPT HSS Cut thread Taper Pipe Tap - Bosnia and Herzegovina

2 -11 1/2 NPT HSS Cut thread Taper Pipe Tap - Bosnia and Herzegovina

  • Painesville, Ohio, United States
  • Jun 14th
Cleveland HSS 3/4" pipe taps 3 pcs. 3/4-14NPTF HS G J1395

Cleveland HSS 3/4" pipe taps 3 pcs. 3/4-14NPTF HS G J1395

  • Addison, Illinois, United States
  • Jun 14th
Cleveland HSS 3/4" pipe taps 3 pcs. 3/4-14NPTF HS G J1495

Cleveland HSS 3/4" pipe taps 3 pcs. 3/4-14NPTF HS G J1495

  • Addison, Illinois, United States
  • Jun 14th
DERCK'S GAUGE DIAL

DERCK'S GAUGE DIAL

  • Cape Neddick, Maine, United States
  • Jun 14th
1/16" - 27 NPT Taper Pipe Die 1/16 - 27 TPI

1/16" - 27 NPT Taper Pipe Die 1/16 - 27 TPI

  • Shanghai, China
  • Jun 12th
ONE (1) USED R&N 3/8"-19 BRITISH PIPE TAP HSG BSPP C24984 4-FLUTE 4FL

ONE (1) USED R&N 3/8"-19 BRITISH PIPE TAP HSG BSPP C24984 4-FLUTE 4FL

  • Minneapolis, Minnesota, United States
  • Jun 12th
ONE (1) USED GREENFIELD 3/8"-18 NPT PIPE TAP G B4 HS 4-FLUTE 4FL

ONE (1) USED GREENFIELD 3/8"-18 NPT PIPE TAP G B4 HS 4-FLUTE 4FL

  • Minneapolis, Minnesota, United States
  • Jun 12th
Master Mechanic 3/8-18 Pipe Tap 788404

Master Mechanic 3/8-18 Pipe Tap 788404

  • Highland, Wisconsin, United States
  • Jun 12th
TAP-BENDIX-BESLY-1/2"X14NPT HSGA2346 R2X32

TAP-BENDIX-BESLY-1/2"X14NPT HSGA2346 R2X32

  • Coeur d'Alene, Idaho, United States
  • Jun 11th
PIPE TAP 3/4-14NPTFx6" OVERALL LGTH HIGH SPEED BLACK OXIDE BESLY USA NEW $48.00

PIPE TAP 3/4-14NPTFx6" OVERALL LGTH HIGH SPEED BLACK OXIDE BESLY USA NEW $48.00

  • North Tonawanda, New York, United States
  • Jun 11th
CHAMPION #325-(1/8-27) NPS 4-FLUTE STRAIGHT PIPE TAP, 2-1/8" OVERALL LENGTH

CHAMPION #325-(1/8-27) NPS 4-FLUTE STRAIGHT PIPE TAP, 2-1/8" OVERALL LENGTH

  • Rockville Centre, New York, United States
  • Jun 11th
NEW ENGLAND Pipe Tap 1/4-18 5FL HSS NPTF USA [052]

NEW ENGLAND Pipe Tap 1/4-18 5FL HSS NPTF USA [052]

  • Saint Louis, Missouri, United States
  • Jun 11th
TAP-PIPE -1/8"-27 NPS (STRAIGHT) VERMONT, USA

TAP-PIPE -1/8"-27 NPS (STRAIGHT) VERMONT, USA

  • Coeur d'Alene, Idaho, United States
  • Jun 11th
TAP-PIPE -1/4"X18 NPT - TRW, USA HS G

TAP-PIPE -1/4"X18 NPT - TRW, USA HS G

  • Coeur d'Alene, Idaho, United States
  • Jun 11th
New Berkley Pipe Dies Set 1-1/4" 1 1/4" NPT H.S.S

New Berkley Pipe Dies Set 1-1/4" 1 1/4" NPT H.S.S

  • Clover, South Carolina, United States
  • Jun 11th

People who viewed this item also vieved

ACCUPRO Taps SeriesYellow Band Thread Size (mm): M7x1.00

ACCUPRO Taps SeriesYellow Band Thread Size (mm): M7x1.00

  • New Bedford, Massachusetts, United States
  • Jan 30th
MACHINIST TOOLS TAP N DYE THREADING TOOLS Storage Unit Found Mixed Lot

MACHINIST TOOLS TAP N DYE THREADING TOOLS Storage Unit Found Mixed Lot

  • Niles, Michigan, United States
  • Jan 30th
TAP HANDLES WRENCHES & EXTENSIONS by The WALTON CO. machinist mechanics tools *F

TAP HANDLES WRENCHES & EXTENSIONS by The WALTON CO. machinist mechanics tools *F

  • Thomaston, Connecticut, United States
  • Jan 30th
WELLS GREENFIELD,O.K.TAP WRENCH TOOL, LOT OF 3 PC MADE IN USA

WELLS GREENFIELD,O.K.TAP WRENCH TOOL, LOT OF 3 PC MADE IN USA

  • La Puente, California, United States
  • Jan 30th
Threading Tap 1-1/2"-12NF

Threading Tap 1-1/2"-12NF

  • Coventry, Rhode Island, United States
  • Jan 30th
40 Piece retreading set (Tap & Die)

40 Piece retreading set (Tap & Die)

  • Placerville, California, United States
  • Jan 30th
M22 X 1.0 HSS Tap Used Once Travers 18-010-215

M22 X 1.0 HSS Tap Used Once Travers 18-010-215

  • Chesnee, South Carolina, United States
  • Jan 30th
7PC LOT GREENFIELD & OTHER BRAND PIPE TAPS(7/8"-9NC,5/8"-8 NF,3/8"-16 NC, ETC.)

7PC LOT GREENFIELD & OTHER BRAND PIPE TAPS(7/8"-9NC,5/8"-8 NF,3/8"-16 NC, ETC.)

  • Wilmington, Delaware, United States
  • Jan 30th
LOT 15PCS OF STANDARD TAPS MACHINE 10-32 TO 3/4-10

LOT 15PCS OF STANDARD TAPS MACHINE 10-32 TO 3/4-10

  • valleyfield, Canada
  • Jan 30th
MACHINIST TOOLS L S STARRETT CALIPERS

MACHINIST TOOLS L S STARRETT CALIPERS

  • Pocahontas, Arkansas, United States
  • Jan 30th
10 Pcs. Titex 1/4-20 H3 B3511 4 FLT Cobalt High Performance Taper Hand Taps

10 Pcs. Titex 1/4-20 H3 B3511 4 FLT Cobalt High Performance Taper Hand Taps

  • Hamden, Connecticut, United States
  • Jan 30th
10 Pcs. Titex 1/4-28 GH3 B4536 Cobalt High Performance Fast Spiral Plug Taps

10 Pcs. Titex 1/4-28 GH3 B4536 Cobalt High Performance Fast Spiral Plug Taps

  • Hamden, Connecticut, United States
  • Jan 30th
10 Pc. Titex 10-32 H6 List B4526 Cobalt High Performance Roll-Form Plug Taps

10 Pc. Titex 10-32 H6 List B4526 Cobalt High Performance Roll-Form Plug Taps

  • Hamden, Connecticut, United States
  • Jan 30th
10 Pc. Titex 6-40 GH2 B4513 Cobalt High Performance Bottoming Hand Taps

10 Pc. Titex 6-40 GH2 B4513 Cobalt High Performance Bottoming Hand Taps

  • Hamden, Connecticut, United States
  • Jan 30th
10 Pc. Titex 3/8-16 H5 B3525 Cobalt High Performance Roll-Form BottomingTaps

10 Pc. Titex 3/8-16 H5 B3525 Cobalt High Performance Roll-Form BottomingTaps

  • Hamden, Connecticut, United States
  • Jan 30th
GUHRING TAPS 3/4-10, LOT OF 5, 4 FLUTE, SPIRAL POINT BRAND NEW

GUHRING TAPS 3/4-10, LOT OF 5, 4 FLUTE, SPIRAL POINT BRAND NEW

  • Sylvania, Ohio, United States
  • Jan 30th
3/4" X 16 HSS GH3 HAND TAPS GROUND THREADS SPPT INDIA NEW 312-1121

3/4" X 16 HSS GH3 HAND TAPS GROUND THREADS SPPT INDIA NEW 312-1121

  • Cerritos, California, United States
  • Jan 30th
NEW HANSON 5/8-11 NC PLUG TAP USA # 1452

NEW HANSON 5/8-11 NC PLUG TAP USA # 1452

  • Oak Lawn, Illinois, United States
  • Jan 30th
2-PCS PRODUCTION TOOL CO. AUTOMOTIVE -TAP - THREAD CHASER -M10 x 1.50

2-PCS PRODUCTION TOOL CO. AUTOMOTIVE -TAP - THREAD CHASER -M10 x 1.50

  • McKee, Kentucky, United States
  • Jan 30th
NO. 4X4" 60D HSS IMP LNG PLAIN CMB DR&CSK IN PLASTIC CASE

NO. 4X4" 60D HSS IMP LNG PLAIN CMB DR&CSK IN PLASTIC CASE

  • Sebastian, Florida, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies