Is Low Voltage Disconnect, Digital Charging Timer Controller, Protector Module

US $21.99

Phoenix, Arizona, United States
Jul 4th

Open on mobile:
QR code

IS Low Voltage Disconnect, Digital Charging Timer Controller, Over Discharge Protector Module for DC 6V-60V 20A Lithium Lead Acid Battery Product Description ICStation Low Voltage Disconnect for DC 6V-60V Lithium/Lead Acid Battery Prevent Over-charge Prevent Over-discharge Display battery voltage, percentage, and operating time. Charging Time Control (00:00-99:59 hours) Discharging Time Control (00:00-99:59 hours) Delay (0~999 seconds) Max Current: 20A Support wire thinner than12 AWG Charge Mode Automatic Charge When the battery power is lower than the setting lower limit value(dn), the relay closes and the charger starts to charge the battery. IN flashing means the battery is in charge. Prevent Overcharge When the battery capacity reaches the upper limit voltage(UP), the relay opens and it cuts off the charger. Discharge Mode Prevent Over-discharge When the battery voltage reaches the set lower limit values, Icstation digital LVD module will disconnect the load automatically to avoid the battery from over-discharging to prolong the battery lifetime. Automatically Reconnects When the battery voltage reaches the upper limit values, the relay closes and the battery starts to discharge. OUT flashing means it is discharging. UP: Press UP to switch from Percentage to Time display. Hold on 5s to switch Charge / Discharge Mode. It displays IN when it is in Charge Mode; displays OUT when it is in Discharge Mode. SET: Press to check the current parameters. Hold on to the button to enter the parameters setting. DOWN: Press to turn on/off the relay, just like a STOP button. How to set the parameters? Press and hold on to the SET button to enter the parameters setting manual. Press the SET button to switch between different parameter settings. Adjust the value with the UP and DOWN buttons. Hold the button for quick adjustments. Press and hold the SET button to save your settings and exit the setup manual. Any Questions? Any questions please write to our service team with your order ID. We are glad to help you solve the issue. LOW VOLTAGE CUTOFF - When the battery voltage reaches the set lower limit values, Icstation digital LVD module will disconnect load automatically to avoid the battery from over-discharging to prolong the battery lifetime. AUTOMATICALLY RECONNECTS - When the battery voltage reaches the upper limit values, the relay closes and the battery starts to discharge. OUT flashing means it is discharging. PREVENT OVERCHARGE - IN flashing means the battery is in charge. When the battery capacity reaches the upper limit voltage(UP), the relay opens and it cuts off the charger. PARAMETERS DISPLAY - Clear LCD display makes it easy to read the voltage, capacity percentage or charging time at a glance. Max Current: 20A. Note: It is a relay switch so it can not adjust the voltage.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	MPN	Does not apply
ISBN	Does not apply
UPC	Does not apply
EAN	Does not apply
Brand	IS