+ Post new Ad
ISCAR E75A D1.00-W .75 INDEXABLE END MILL Product ID ISC 3110340, US $85.00 – Picture 0
ISCAR E75A D1.00-W .75 INDEXABLE END MILL Product ID ISC 3110340, US $85.00 – Picture 1
ISCAR E75A D1.00-W .75 INDEXABLE END MILL Product ID ISC 3110340, US $85.00 – Picture 2
ISCAR E75A D1.00-W .75 INDEXABLE END MILL Product ID ISC 3110340, US $85.00 – Picture 0
ISCAR E75A D1.00-W .75 INDEXABLE END MILL Product ID ISC 3110340, US $85.00 – Picture 1
ISCAR E75A D1.00-W .75 INDEXABLE END MILL Product ID ISC 3110340, US $85.00 – Picture 2

Iscar E75a D1.00-w .75 Indexable End Mill Product Id Isc 3110340

US $85.00

  • Saint Peters, Missouri, United States
  • Feb 17th
Open on mobile:
QR code
ISCAR E75A D1.00-W .75 INDEXABLE END MILL Product ID ISC 3110340 Retail for $315 We sell high-quality industrial surplus at discounted prices.  While we take every effort to inspect and test each item we sell, we do not have the capability to fully evaluate many of the items we sell.  All items are sold as is with no warranty (unless otherwise specified) and are non-returnable.  If you don’t see the answer you are looking for in our description or photos, PLEASE ask before purchasing.
Condition New other (see details) :
A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes “These were received as surplus/overstock without factory packaging. They were received inside distributor envelopes. They appear to be unused, but have a slight amount of grime on them from being out of packaging (see photos).”

Directions

Similar products from End Mills Router & Drill Bits

Cobalt machining tools bits LOT OF 7

Cobalt machining tools bits LOT OF 7

  • Manchester, New Hampshire, United States
  • Feb 17th
Cobalt machining tools bits lot of 4

Cobalt machining tools bits lot of 4

  • Manchester, New Hampshire, United States
  • Feb 17th
Seco #59979 Indexable Square Shoulder End Mill 1" Cutting Diameter

Seco #59979 Indexable Square Shoulder End Mill 1" Cutting Diameter

  • Garden City, Idaho, United States
  • Feb 17th
Garr Carbide End Mills 1/2" OD (2X)

Garr Carbide End Mills 1/2" OD (2X)

  • Blue Springs, Missouri, United States
  • Feb 17th
Garr Carbide End Mills 3/4" OD (1X)

Garr Carbide End Mills 3/4" OD (1X)

  • Blue Springs, Missouri, United States
  • Feb 17th
Garr Carbide End Mills 3/8" OD (2X) TiCN Coated!! Full Ball Nose Radius!!

Garr Carbide End Mills 3/8" OD (2X) TiCN Coated!! Full Ball Nose Radius!!

  • Blue Springs, Missouri, United States
  • Feb 17th
Garr Carbide End Mills 5/8" OD (2X)

Garr Carbide End Mills 5/8" OD (2X)

  • Blue Springs, Missouri, United States
  • Feb 17th
Garr Carbide End Mills 5/8" OD (2X) TiCN Coated!

Garr Carbide End Mills 5/8" OD (2X) TiCN Coated!

  • Blue Springs, Missouri, United States
  • Feb 17th
Garr Carbide End Mills 7/16" OD (2X)

Garr Carbide End Mills 7/16" OD (2X)

  • Blue Springs, Missouri, United States
  • Feb 17th
NEW Niagara Cutter 14350 corner round

NEW Niagara Cutter 14350 corner round

  • Bucyrus, Ohio, United States
  • Feb 17th
3 RESHARPENED NIAGARA ROUGHING ENDMILLS. 1/2" SHANK. 4 FLUTE. HS COBALT. {F881}

3 RESHARPENED NIAGARA ROUGHING ENDMILLS. 1/2" SHANK. 4 FLUTE. HS COBALT. {F881}

  • Mentor, Ohio, United States
  • Feb 16th
2 RESHARPENED WELDON ROUGHING ENDMILLS. 3/4" SHANK. 4 FLUTE HSS. {F902}

2 RESHARPENED WELDON ROUGHING ENDMILLS. 3/4" SHANK. 4 FLUTE HSS. {F902}

  • Mentor, Ohio, United States
  • Feb 16th
3 RESHARPENED USA ROUGHING ENDMILLS. 1/2" SHANK. 4 FLUTE. HS COBALT. {F878}

3 RESHARPENED USA ROUGHING ENDMILLS. 1/2" SHANK. 4 FLUTE. HS COBALT. {F878}

  • Mentor, Ohio, United States
  • Feb 16th
2 RESHARPENED ROUGHING ENDMILLS. 5/8" SHANK. 3, 4 FL. HS COBALT. M-42 {F893}

2 RESHARPENED ROUGHING ENDMILLS. 5/8" SHANK. 3, 4 FL. HS COBALT. M-42 {F893}

  • Mentor, Ohio, United States
  • Feb 16th
New carbide BORING BAR .070 X .438 DEPTH

New carbide BORING BAR .070 X .438 DEPTH

  • United States
  • Feb 16th
New carbide BORING BAR .110 MB X .562 DEPTH

New carbide BORING BAR .110 MB X .562 DEPTH

  • United States
  • Feb 16th
LOT OF THREE 7/8 HSS END MILLS WITH 3/4" SHANKS

LOT OF THREE 7/8 HSS END MILLS WITH 3/4" SHANKS

  • Port Richey, Florida, United States
  • Feb 16th
LOT OF FOUR 1/2" HSS END MILLS WITH 1/2" SHANKS

LOT OF FOUR 1/2" HSS END MILLS WITH 1/2" SHANKS

  • Port Richey, Florida, United States
  • Feb 16th
LOT OF TWO 3/4" HSS END MILLS WITH 3/4" SHANKS

LOT OF TWO 3/4" HSS END MILLS WITH 3/4" SHANKS

  • Port Richey, Florida, United States
  • Feb 16th
LOT OF 12 MISC HSS END MILLS , 1/8" TO 5/8"

LOT OF 12 MISC HSS END MILLS , 1/8" TO 5/8"

  • Port Richey, Florida, United States
  • Feb 16th

People who viewed this item also vieved

1/4" Square Hassay Savage HSS Broach with 17/64" & 9/32" Pilot Drill Bits

1/4" Square Hassay Savage HSS Broach with 17/64" & 9/32" Pilot Drill Bits

  • Pottstown, Pennsylvania, United States
  • Jan 30th
KEYWAY BROACH SET WITH MANY BUSHINGS

KEYWAY BROACH SET WITH MANY BUSHINGS

  • DeLand, Florida, United States
  • Jan 30th
-- LOT OF --- KENNAMETAL SDPT 1204EDERGB/2 KC 715M 20pcs

-- LOT OF --- KENNAMETAL SDPT 1204EDERGB/2 KC 715M 20pcs

  • Beograd, Serbia
  • Jan 30th
10pc KOMET carbide inserts W29240300481 KX02 380004 BK81

10pc KOMET carbide inserts W29240300481 KX02 380004 BK81

  • Knoxville, Tennessee, United States
  • Jan 30th
1 SET (5 EA) KENNAMETAL CERAMIC INSERTS RPGN120400E

1 SET (5 EA) KENNAMETAL CERAMIC INSERTS RPGN120400E

  • Murrieta, California, United States
  • Jan 30th
NTK Ceramic Turning Inserts DNGA -543 T0820 HC2 Qty 10 [674]

NTK Ceramic Turning Inserts DNGA -543 T0820 HC2 Qty 10 [674]

  • Saint Louis, Missouri, United States
  • Jan 30th
How To Make A Low Cost Tool Post Grinder For Your Metal Lathe Easy Construction

How To Make A Low Cost Tool Post Grinder For Your Metal Lathe Easy Construction

  • Port Alberni, British Columbia, Canada
  • Jan 30th
HILTI AG- D 7" Semi -Flex Special Perormance Grinding Wheels. Qty 10 Per Box

HILTI AG- D 7" Semi -Flex Special Perormance Grinding Wheels. Qty 10 Per Box

  • Daphne, Alabama, United States
  • Jan 30th
STRIPPIT Nisshinbo 3.5" CE TOOL DIE, STRIPPER, PUNCH GUIDE 1.087 X 2.624 RT 43

STRIPPIT Nisshinbo 3.5" CE TOOL DIE, STRIPPER, PUNCH GUIDE 1.087 X 2.624 RT 43

  • Lake Worth, Florida, United States
  • Jan 30th
STRIPPIT Nisshinbo AMADA 3.5" PUNCH & DIE WILSON UP 1.000 SQ W/ 1.012 24

STRIPPIT Nisshinbo AMADA 3.5" PUNCH & DIE WILSON UP 1.000 SQ W/ 1.012 24

  • Lake Worth, Florida, United States
  • Jan 30th
1" Cleveland Shell Reamer on 5/8" Shank

1" Cleveland Shell Reamer on 5/8" Shank

  • Lebanon, Tennessee, United States
  • Jan 30th
STRAIGHT SHANK REAMER 6MM RIGHT HAND CUT ABOUT 3 7/8" LONG #7656

STRAIGHT SHANK REAMER 6MM RIGHT HAND CUT ABOUT 3 7/8" LONG #7656

  • Resaca, Georgia, United States
  • Jan 30th
3 BAHCO BAND SAW BLADES 16'5" (197") 1-1/4" .042 4/6" TEETH QTY-3

3 BAHCO BAND SAW BLADES 16'5" (197") 1-1/4" .042 4/6" TEETH QTY-3

  • Punta Gorda, Florida, United States
  • Jan 30th
Blade Mfg. Co. Semi High Speed Steel 8" 3/64 Gauge 150 Teeth Saw Blade, SMC #7

Blade Mfg. Co. Semi High Speed Steel 8" 3/64 Gauge 150 Teeth Saw Blade, SMC #7

  • Cleveland, Ohio, United States
  • Jan 30th
10pcs Titanium Coated Carbide PCB Engraving CNC Bit Router Tools 30 Degree 0.2mm

10pcs Titanium Coated Carbide PCB Engraving CNC Bit Router Tools 30 Degree 0.2mm

  • CN, China
  • Jan 30th
Carving knives,Round Bottom Engraving knife 90 Angle * 0.3

Carving knives,Round Bottom Engraving knife 90 Angle * 0.3

  • Guang Zhou, China
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies