Isd1700 Series Voice Record Play Isd1760 Module For Arduino Avr Pic Raspberry Pi

US $940

Shenzhen , China
Jun 12th

Open on mobile:
QR code

1. Recording REC: Press and hold the REC key while the LED lights up. Speak into the MIC, and the content of the speech will be recorded into the ISD1700 voice chip. After recording a segment, raise the key, and the LED will go out. Press the key again to start recording the second paragraph or subsequent paragraphs. The ISD1700 series voice record play module, specifically the ISD1760 module, is a versatile and highly functional chip designed for easy integration into various circuit boards. This chip is compatible with all ISD1700 series chips, and offers simple and fully functional features. With the ability to record multiple segments and adjust sampling rates from 4K to 12K, this chip can operate at a power supply range from 2.4V to 5.5V. One of the most useful features of this chip is the new recording prompts, which alerts users to new recordings by flashing the LED once every few seconds. Additionally, the chip has four kinds of sound to prompt the user's operating results, such as start recording, stop recording, erase, and erase all. To use the keys of the ISD1700 module, follow the instructions below: 2. Playback PLAY: This can be performed in two ways: edge-triggered and level-triggered. After recording, the tone playback pointer will remain in the final This module comes with two independent audio signal input channels: a microphone input and analog signal input. In independent key mode, the chip will enter power-down mode automatically to reduce power consumption once the operation is completed. The ISD1700 module is also compatible with SPI mode, which enables users to perform more functions on the chip operation. If the user needs to configure a memory address for playback on the analog channel, the Analog Path Configuration register (APC) is available for reading and writing. The ISD1760 module is compatible with Arduino, AVR, PIC, and Raspberry pi, making it a popular choice for hobbyists and professionals alike. This module requires a 5V power supply and has a recording time of 75 seconds at 6K or 60 seconds at 8K, with a chip operating frequency of 6KHZ and 8KHZ options. The module comes with power and chip indicator lights for ease of use, and is straightforward to operate without any additional microcontrollers or modules. Moreover, the chip control pin is already leads, which facilitates the control connection.