+ Post new Ad
Jacobs 3/4 inch #36 drill chuck NOS, US $280 – Picture 0
Jacobs 3/4 inch #36 drill chuck NOS, US $280 – Picture 0

Jacobs 3/4 Inch #36 Drill Chuck Nos

US $280

  • Sultan, Washington, United States
  • Aug 29th
Open on mobile:
QR code
Jacobs 3/4 inch #36 drill chuck NOS. I recently listed a large group of drill chucks and Morse taper adapters. This is the largest one at three-quarter inch capacity. This has never been used and there was some slight surface rust that I wire brushed off. Besides that it has never been used so I am selling as new old stock. Take a look at my other listings as I have quite a bit of drill trucks and adapters and I do try to combine shipping to the best of my ability and thanks again
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand Jacobs
Mounting Size 3/4 in
Drill Chuck Type Drill Chuck

Directions

Similar products from Boring Chucks

MILWAUKEE 48-66-4080 CHUCK KEY HOLDER SEALED BLISTER-PACK **BRAND NEW**

MILWAUKEE 48-66-4080 CHUCK KEY HOLDER SEALED BLISTER-PACK **BRAND NEW**

  • Zirconia, North Carolina, United States
  • Aug 30th
R8 SHANK TO 2MT DRILL CHUCK ARBOR ADAPTER SLEEVE FITS BRIDGEPORT MT2 MORSE TAPER

R8 SHANK TO 2MT DRILL CHUCK ARBOR ADAPTER SLEEVE FITS BRIDGEPORT MT2 MORSE TAPER

  • La Puente, California, United States
  • Aug 30th
Jacobs Drill Chuck 0 - 3/8" Capacity JT#2 with 1/2" Shank 2A (Stk29)

Jacobs Drill Chuck 0 - 3/8" Capacity JT#2 with 1/2" Shank 2A (Stk29)

  • Lansing, Michigan, United States
  • Aug 30th
USED ALBRECHT KEYLESS DRILL CHUCK 0-1/8" WITH CAT40 LYNDEX

USED ALBRECHT KEYLESS DRILL CHUCK 0-1/8" WITH CAT40 LYNDEX

  • Apple Valley, California, United States
  • Aug 30th
Bestgle 1/2-20UNF Mount 1.5-13mm Capacity Key Drill Chuck 4 Air Impact Wrenches

Bestgle 1/2-20UNF Mount 1.5-13mm Capacity Key Drill Chuck 4 Air Impact Wrenches

  • Beech Grove, Indiana, United States
  • Aug 30th
Stay-Tuff Drill Chuck 11 Ga

Stay-Tuff Drill Chuck 11 Ga

  • Chillicothe, Missouri, United States
  • Aug 30th
JACOBS MU4G61 1/16-3/8 KEY TYPE DRILL CHUCK USA 3/8-24 thread

JACOBS MU4G61 1/16-3/8 KEY TYPE DRILL CHUCK USA 3/8-24 thread

  • University Park, Iowa, United States
  • Aug 30th
Safety Chuck w/Shaft 1-3/8", Model# CSB125P, Foot Mounted, Chrome Hand Wheel

Safety Chuck w/Shaft 1-3/8", Model# CSB125P, Foot Mounted, Chrome Hand Wheel

  • Kawkawlin, Michigan, United States
  • Aug 30th
1/32"- 5/8" Heavy Duty Drill Chuck with Key and MT2 Shank (Morse Taper...

1/32"- 5/8" Heavy Duty Drill Chuck with Key and MT2 Shank (Morse Taper...

  • US, United States
  • Aug 29th
miscellaneous group of MT #2 drill chucks and adapters

miscellaneous group of MT #2 drill chucks and adapters

  • Sultan, Washington, United States
  • Aug 29th
Jacobs 59B Headstock Chuck With K4 Key. Made In U.S.A. Very good used condition

Jacobs 59B Headstock Chuck With K4 Key. Made In U.S.A. Very good used condition

  • Tinley Park, Illinois, United States
  • Aug 29th
A0304 morse taper number three drill chuck adapter NOS

A0304 morse taper number three drill chuck adapter NOS

  • Sultan, Washington, United States
  • Aug 29th
LFA 43B-5B 1/2-20 mount with 2MT 3MT 1.5 1.75 Adaptors Lathe Drill Chuck LOT -11

LFA 43B-5B 1/2-20 mount with 2MT 3MT 1.5 1.75 Adaptors Lathe Drill Chuck LOT -11

  • Garden Grove, California, United States
  • Aug 29th
Victor 7110 13MM Drill Chuck 1/2" Capacity with 3/4" Shank LOT # 21

Victor 7110 13MM Drill Chuck 1/2" Capacity with 3/4" Shank LOT # 21

  • Garden Grove, California, United States
  • Aug 29th
Jacobs Chuck 34 33 Taper Made in USA 0-1/2in

Jacobs Chuck 34 33 Taper Made in USA 0-1/2in

  • San Leandro, California, United States
  • Aug 29th
Vintage Atlas Craftsman Lathe #2 MT MT2 Live Center South Bend Logan Elgin

Vintage Atlas Craftsman Lathe #2 MT MT2 Live Center South Bend Logan Elgin

  • Chico, California, United States
  • Aug 29th
Jacobs Heavy Duty Ball Bearing Chuck & Key 16N CAP 1/8-5/8"

Jacobs Heavy Duty Ball Bearing Chuck & Key 16N CAP 1/8-5/8"

  • San Leandro, California, United States
  • Aug 29th
Jacobs Heavy Duty Ball Bearing Super Chuck 14N 0-1/2"

Jacobs Heavy Duty Ball Bearing Super Chuck 14N 0-1/2"

  • San Leandro, California, United States
  • Aug 29th
Jacobs Heavy Duty Ball Bearing Chuck 16N CAP 1/8-5/8"

Jacobs Heavy Duty Ball Bearing Chuck 16N CAP 1/8-5/8"

  • San Leandro, California, United States
  • Aug 29th
Chum Power 1/64” To 1/2" Special Heavy Duty Keyless Drill Chuck 13s MT2

Chum Power 1/64” To 1/2" Special Heavy Duty Keyless Drill Chuck 13s MT2

  • Munford, Tennessee, United States
  • Aug 29th

People who viewed this item also vieved

NEW Jacobs Chuck No. AO306 (3N165) 3MT-6JT Morse-Jacobs Arbor

NEW Jacobs Chuck No. AO306 (3N165) 3MT-6JT Morse-Jacobs Arbor

  • Broken Arrow, Oklahoma, United States
  • Jan 30th
Neapco 10-0431 (NEA100431) N1000 Series End Yoke - Splined Bore - 1-3/8"

Neapco 10-0431 (NEA100431) N1000 Series End Yoke - Splined Bore - 1-3/8"

  • Sioux City, Iowa, United States
  • Jan 30th
PARLEC BORING BAR SLEEVE 1.50 OD X .375 ID P/N KMS-T20109-A NEW

PARLEC BORING BAR SLEEVE 1.50 OD X .375 ID P/N KMS-T20109-A NEW

  • Bellflower, California, United States
  • Jan 30th
SANDVIK COROMANT - 431 29992R9 BORING BAR QUICK CHANGE

SANDVIK COROMANT - 431 29992R9 BORING BAR QUICK CHANGE

  • McKee, Kentucky, United States
  • Jan 30th
COMMAND BT40 1/2" DIAMETER ENDMILL HOLDER BT 40 END MILL LOT C10622

COMMAND BT40 1/2" DIAMETER ENDMILL HOLDER BT 40 END MILL LOT C10622

  • Dayton, Ohio, United States
  • Jan 30th
PARLEC BT40 1.25" DIAMETER ENDMILL HOLDER BT 40 END MILL LOT C10621

PARLEC BT40 1.25" DIAMETER ENDMILL HOLDER BT 40 END MILL LOT C10621

  • Dayton, Ohio, United States
  • Jan 30th
NEW GARDNER OM6538-3 MECHANICAL BUSHING NYLATRON 7-3/4X7/8IN ASSEMBLY B254958

NEW GARDNER OM6538-3 MECHANICAL BUSHING NYLATRON 7-3/4X7/8IN ASSEMBLY B254958

  • Buffalo, New York, United States
  • Jan 30th
NEW BROWNING H-2-15/16 SERIES H SPLIT TAPER 15/16 IN BORE BUSHING B259670

NEW BROWNING H-2-15/16 SERIES H SPLIT TAPER 15/16 IN BORE BUSHING B259670

  • Buffalo, New York, United States
  • Jan 30th
NIKKEN 63-C THRU COOLANT RETENTION KNOB CAT-50

NIKKEN 63-C THRU COOLANT RETENTION KNOB CAT-50

  • Bellflower, California, United States
  • Jan 30th
CRITERION 3/4" BORING HEAD #DBL-203 w/ CAT40 SHANK

CRITERION 3/4" BORING HEAD #DBL-203 w/ CAT40 SHANK

  • Grand Rapids, Michigan, United States
  • Jan 30th
carboloy r220.13-.00-12 3in Face mill cutter

carboloy r220.13-.00-12 3in Face mill cutter

  • Columbia, Kentucky, United States
  • Jan 30th
Brown & Sharp No 22B Tool Holder

Brown & Sharp No 22B Tool Holder

  • El Cajon, California, United States
  • Jan 30th
SUNNEN 2H-P28-2000 WF HONING MANDREL

SUNNEN 2H-P28-2000 WF HONING MANDREL

  • Rancho Cucamonga, California, United States
  • Jan 30th
SK 12 PC IMPACT SOCKET SET 6 POINT 3/8 DRIVE 8MM TO 19MM

SK 12 PC IMPACT SOCKET SET 6 POINT 3/8 DRIVE 8MM TO 19MM

  • Schererville, Indiana, United States
  • Jan 30th
13/32 Jobber Length General Purpose HSS Black Oxide Drill NEW Chicago Latrobe

13/32 Jobber Length General Purpose HSS Black Oxide Drill NEW Chicago Latrobe

  • Trenton, Michigan, United States
  • Jan 30th
T8 100 040 AND 039 TC Brazed TCT Cut Off Empire Tool Brand 2pcs

T8 100 040 AND 039 TC Brazed TCT Cut Off Empire Tool Brand 2pcs

  • Trenton, Michigan, United States
  • Jan 30th
Lathe Metalworker Quick Change Tool Post Holding OST-50-7 Toolholder HOLDER

Lathe Metalworker Quick Change Tool Post Holding OST-50-7 Toolholder HOLDER

  • Huntington Beach, California, United States
  • Jan 30th
Tool holder JFK-B2 THREADING FACING HOLDER

Tool holder JFK-B2 THREADING FACING HOLDER

  • Norwalk, California, United States
  • Jan 30th
NEW ZEBRA 46350 RIBBON SPINDLE REWIND TAKE UP UPGRADE ENHANCED KIT B372658

NEW ZEBRA 46350 RIBBON SPINDLE REWIND TAKE UP UPGRADE ENHANCED KIT B372658

  • Buffalo, New York, United States
  • Jan 30th
NEW ZEBRA 46350 RIBBON SPINDLE TAKE UP ENHANCED REWIND KIT B372657

NEW ZEBRA 46350 RIBBON SPINDLE TAKE UP ENHANCED REWIND KIT B372657

  • Buffalo, New York, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies