+ Post new Ad
Jacobs Chuck 0083534 BT 50 End Mill Tool Holder 50mm Diameter 120mm Projection, US $237.54 – Picture 0
Jacobs Chuck 0083534 BT 50 End Mill Tool Holder 50mm Diameter 120mm Projection, US $237.54 – Picture 0

Jacobs Chuck 0083534 Bt 50 End Mill Tool Holder 50mm Diameter 120mm Projection

US $237.54

  • Wichita, Kansas, United States
  • Jan 30th
Open on mobile:
QR code
Jacobs Chuck 0083534 BT 50 End Mill Tool Holder 50mm Diameter with 120mm Projection Technical Details Provides more accurate, rigid tool holder-to-spindle mount tapers Taper grounded to AT32 Easy change and set up. Low maintenance Through spindle coolant is standard   Product Description From the Manufacturer This Jacobs BT 50 end mill tool holder is designed to hold up to a 50-mm shank cutting tool. It has 120-mm projection and is prebalanced to 15,000 RPM at G2.5. The Jacobs BT 50 end mill tool holder is used for heavy duty cutting and general milling. The Jacobs BT 50 end mill tool holder is able to provide more accurate, rigid tool holder-to-spindle mount tapers. The taper is grounded to AT3. Easy changes and set-ups makes the Jacobs BT 50 end mill tool holder a low maintenance product. The Through spindle coolant is standard for all Jacobs end mill tool holders and the Jacobs BT 50 end mill tool holder comes with a one year factory warranty   AllJacobs Chuck Tool Holders are new and factory sealed.  Each tool ships in the reusable protective tool holder capsule for storing when not in use.    Accessories and Tightening Wrench not included, unless otherwise stated. Can Be Purchased Locally

Directions

Similar products from BT Tool Holders

BT 40 TOOL HOLDER - 3/4 " - 6 " GAGE - HEAT SHRINK - PARLEC - 981Q

BT 40 TOOL HOLDER - 3/4 " - 6 " GAGE - HEAT SHRINK - PARLEC - 981Q

  • Bedford, Ohio, United States
  • Jan 30th
BT 40 TOOL HOLDER - 3/8 " - 6 " GAGE - HEAT SHRINK - PARLEC - 981N

BT 40 TOOL HOLDER - 3/8 " - 6 " GAGE - HEAT SHRINK - PARLEC - 981N

  • Bedford, Ohio, United States
  • Jan 30th
BT 40 TOOL HOLDER - 5/8 " - 4 " GAGE - TECNARA - 981X

BT 40 TOOL HOLDER - 5/8 " - 4 " GAGE - TECNARA - 981X

  • Bedford, Ohio, United States
  • Jan 30th
Jacobs Chuck 0085330 HSK 63 A Shell Face Mill Tool Holder 40mm Dia. 60mm

Jacobs Chuck 0085330 HSK 63 A Shell Face Mill Tool Holder 40mm Dia. 60mm

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0065132 DIN 371 Clutch Tap Collet 2 M8 8.0mm Shank 6.2mm Drive

Jacobs Chuck 0065132 DIN 371 Clutch Tap Collet 2 M8 8.0mm Shank 6.2mm Drive

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0065160 ISO 529/ 2283 Clutch Tap Collet 1, M10 8.0mm 6.3mm Drive

Jacobs Chuck 0065160 ISO 529/ 2283 Clutch Tap Collet 1, M10 8.0mm 6.3mm Drive

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0067311 CAT V 40 Tension/Compression Tap Holder 3 M14 to M36 73mm

Jacobs Chuck 0067311 CAT V 40 Tension/Compression Tap Holder 3 M14 to M36 73mm

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs 30544 JKB 160 - 50 3.0 - 16.0mm High Torque Precision Keyless Chuck BT 50

Jacobs 30544 JKB 160 - 50 3.0 - 16.0mm High Torque Precision Keyless Chuck BT 50

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0085215 CAT V 50 Shell/ Face Mill Tool Holder 1" Dia. 2" Projection

Jacobs Chuck 0085215 CAT V 50 Shell/ Face Mill Tool Holder 1" Dia. 2" Projection

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0065142 DIN 376 Clutch Tapping Collet 2, M16 12.0mm 9.0mm

Jacobs Chuck 0065142 DIN 376 Clutch Tapping Collet 2, M16 12.0mm 9.0mm

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0085151 BT 50 Shell/ Face Mill Tool Holder 40mm Diameter 50mm Proj

Jacobs Chuck 0085151 BT 50 Shell/ Face Mill Tool Holder 40mm Diameter 50mm Proj

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs 0080730 CAT V 40 ER 32 Tool Holder with 8-Inch Projection e

Jacobs 0080730 CAT V 40 ER 32 Tool Holder with 8-Inch Projection e

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0080722-51FC CAT V 40 ER 20 Tool Holder B (DIN B) Flange Coolant 6"

Jacobs Chuck 0080722-51FC CAT V 40 ER 20 Tool Holder B (DIN B) Flange Coolant 6"

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0065652 DIN 376 Rigid Tap Collet 3, M33 25.0mm Shank 20.0mm

Jacobs Chuck 0065652 DIN 376 Rigid Tap Collet 3, M33 25.0mm Shank 20.0mm

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0085403 NMTB 30 Shell Face Mill Tool Holder 1-1/4" 1/2" W12

Jacobs Chuck 0085403 NMTB 30 Shell Face Mill Tool Holder 1-1/4" 1/2" W12

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs 0066110 BT 40 Rigid Tap Holder, Size 2 Tap M8 - M24 Pre-Balanced to 6K

Jacobs 0066110 BT 40 Rigid Tap Holder, Size 2 Tap M8 - M24 Pre-Balanced to 6K

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0083558 CAT V 50 End Mill Tool Holder 1-1/2" DiA 4-3/5" Projection

Jacobs Chuck 0083558 CAT V 50 End Mill Tool Holder 1-1/2" DiA 4-3/5" Projection

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs 0065164 ISO 529/ 2283 Tapping Collet #2 Tap M14 11.2 MM Shank 9.0 MM

Jacobs 0065164 ISO 529/ 2283 Tapping Collet #2 Tap M14 11.2 MM Shank 9.0 MM

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0065442 DIN 371 Rigid Tap Collet 1 M4 2.8mm Shank 2.1mm Drive

Jacobs Chuck 0065442 DIN 371 Rigid Tap Collet 1 M4 2.8mm Shank 2.1mm Drive

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0065432 DIN 371 Rigid Tap Collet 1 M10 10.0mm Shank 8.0mm Drive

Jacobs Chuck 0065432 DIN 371 Rigid Tap Collet 1 M10 10.0mm Shank 8.0mm Drive

  • Wichita, Kansas, United States
  • Jan 30th

People who viewed this item also vieved

VALENITE CAT40 3/16" DIA ENDMILL HOLDER MORE LISTED CAT 40 END MILL LOT C11646

VALENITE CAT40 3/16" DIA ENDMILL HOLDER MORE LISTED CAT 40 END MILL LOT C11646

  • Dayton, Ohio, United States
  • Mar 1st
PARLEC CAT40 1" ENDMILL HOLDER C40-10EM4 CAT 40 END MILL LOT C11666

PARLEC CAT40 1" ENDMILL HOLDER C40-10EM4 CAT 40 END MILL LOT C11666

  • Dayton, Ohio, United States
  • Mar 1st
CRITERION CBER40 ER COLLET BORING SYSTEM BORING HEAD - ER40 - SGL-1250

CRITERION CBER40 ER COLLET BORING SYSTEM BORING HEAD - ER40 - SGL-1250

  • Covina, California, United States
  • Mar 6th
BRIDGEPORT 3/8" BORING HEAD w/ 3/4" SHANK - #1

BRIDGEPORT 3/8" BORING HEAD w/ 3/4" SHANK - #1

  • Covina, California, United States
  • Mar 6th
Akko S16P PTUNR 16 for TNMG 1604.. Boring Bar 93° degrees

Akko S16P PTUNR 16 for TNMG 1604.. Boring Bar 93° degrees

  • Denizli,,TUR, Turkey
  • Mar 8th
Akko A0810H SDUCR 07 for DCMT 0702.. Coolant Boring Bar 93° degrees

Akko A0810H SDUCR 07 for DCMT 0702.. Coolant Boring Bar 93° degrees

  • Denizli,,TUR, Turkey
  • Mar 8th
NOS! COLLIS SOCKET SLEEVE, 1 7/8HT x 5MT C6

NOS! COLLIS SOCKET SLEEVE, 1 7/8HT x 5MT C6

  • Bremen, Indiana, United States
  • Mar 9th
Bilz Quick Change Adapter ASBA28-Z - NEW

Bilz Quick Change Adapter ASBA28-Z - NEW

  • Franklin, Kentucky, United States
  • Mar 9th
#K552 Lot of 50 Drill Bushing Egg Cup Drill Guide Aerospace Aircraft Tool 1/4"

#K552 Lot of 50 Drill Bushing Egg Cup Drill Guide Aerospace Aircraft Tool 1/4"

  • San Diego, California, United States
  • Mar 10th
#K551 Lot of 50 Drill Bushing Egg Cup Drill Guide Aerospace Aircraft Tool 1/4"

#K551 Lot of 50 Drill Bushing Egg Cup Drill Guide Aerospace Aircraft Tool 1/4"

  • San Diego, California, United States
  • Mar 10th
DORIAN D30BXA-1 Tool Holder, Turning/Facing, BXA Series Holder NICE !!!!

DORIAN D30BXA-1 Tool Holder, Turning/Facing, BXA Series Holder NICE !!!!

  • Youngstown, Ohio, United States
  • May 2nd
(X1-2) 1 NEW TRITRONICS 19067 BRACKET ASSEMBLY- show original title

(X1-2) 1 NEW TRITRONICS 19067 BRACKET ASSEMBLY- show original title

  • Cleveland, Ohio, United States
  • May 2nd
Jacobs No. 0 Chuck on a No.2 Jacobs MT Shank,0-5/32 Capacity,w/key, #J11416

Jacobs No. 0 Chuck on a No.2 Jacobs MT Shank,0-5/32 Capacity,w/key, #J11416

  • Cocoa, Florida, United States
  • May 29th
JACOBS 33BA CHUCK w KEY 5/64"-1/2" or 2-13mm Capacity / 5/8" SHANK / 1/2" Thread

JACOBS 33BA CHUCK w KEY 5/64"-1/2" or 2-13mm Capacity / 5/8" SHANK / 1/2" Thread

  • Pemberton, New Jersey, United States
  • May 29th
Dorian Tool ADDPNN Jet-Stream Square Shank Chromium Molybdenum Alloy Steel

Dorian Tool ADDPNN Jet-Stream Square Shank Chromium Molybdenum Alloy Steel

  • USA, United States
  • May 30th
Dorian Tool V2 Victory Thru Coolant Chromium Molybdenum Alloy Steel Quick Change

Dorian Tool V2 Victory Thru Coolant Chromium Molybdenum Alloy Steel Quick Change

  • USA, United States
  • May 30th
Sunnen 2-1/2" 2H-P28 2500 WG Hone Mandrel

Sunnen 2-1/2" 2H-P28 2500 WG Hone Mandrel

  • Valley View, Pennsylvania, United States
  • Jun 1st
LOT OF 4 SUNNEN SL MANDRELS WITH WEDGES/SHIMS .720, .780, .900 & .960

LOT OF 4 SUNNEN SL MANDRELS WITH WEDGES/SHIMS .720, .780, .900 & .960

  • Dundee, Michigan, United States
  • Jun 1st
5pcs Reprap 12V 40W Ceramic Cartridge Heater for 3D Printer Prusa Mendel 1M

5pcs Reprap 12V 40W Ceramic Cartridge Heater for 3D Printer Prusa Mendel 1M

  • Hongkong, Hong Kong
  • Jun 9th
GRINDING SPINDLE MOUNT FOR 3-1/2 OD SPINDLES (W3)

GRINDING SPINDLE MOUNT FOR 3-1/2 OD SPINDLES (W3)

  • Mitchell, Indiana, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies