+ Post new Ad
Jacobs DIN 40 Type A Pull Stud 81253 e, US $22.58 – Picture 0
Jacobs DIN 40 Type A Pull Stud 81253 e, US $22.58 – Picture 0

Jacobs Din 40 Type A Pull Stud 81253 E

US $22.58

  • Wichita, Kansas, United States
  • Jan 30th
Open on mobile:
QR code
Jacobs DIN 40 Type A Pull Stud 81253 Technical Details Precision gound Highest quality for maximum safety and long life   Product Description From the Manufacturer The Jacobs DIN 40 Type A Pull Stud is 54mm in length. This Jacobs DIN 40 Type A Pull Stud is precision ground and manufactured to the best quality for maximum safety and longer life. Like all Jacobs Chuck's products, this Jacobs DIN 40 Type A Pull Stud comes with a one year factory warranty. Please note pull studs vary in shapes and sizes. Different machining center manufacturers use different stud configurations on their models. Choosing the correct pull stud is critical for safe operation of the machine tool. Jacobs is not responsible for any damage, or injury as a result of using the wrong pull stud.  AllJacobs Chuck Tool Holders are new and factory sealed.  Each tool ships in the reusable protective tool holder capsule for storing when not in use.   Accessories and Tightening Wrench not included, unless otherwise stated. Can Be Purchased Locally

Directions

Similar products from BT Tool Holders

BT 40 TOOL HOLDER - 180 DA COLLET HOLDER - 133E

BT 40 TOOL HOLDER - 180 DA COLLET HOLDER - 133E

  • Bedford, Ohio, United States
  • Jan 30th
BT 40 TOOL HOLDER - 3/8" - 3" GAGE - HEAT SHRINK - PARLEC - 981J

BT 40 TOOL HOLDER - 3/8" - 3" GAGE - HEAT SHRINK - PARLEC - 981J

  • Bedford, Ohio, United States
  • Jan 30th
BT 40 TOOL HOLDER - ER 25 COLLET HOLDER - 2" GAGE - LYNDEX - 981D

BT 40 TOOL HOLDER - ER 25 COLLET HOLDER - 2" GAGE - LYNDEX - 981D

  • Bedford, Ohio, United States
  • Jan 30th
New 5/8 CAT40 ER11 3" Collet Chuck Holder ER11 Toolholder CNC Milling & Lathe

New 5/8 CAT40 ER11 3" Collet Chuck Holder ER11 Toolholder CNC Milling & Lathe

  • hongkong, Hong Kong
  • Jan 30th
Excel Kiwa 810 VMC BT 40 Swing Arm KOE113 tool changer convert CAT 40 to BT 40

Excel Kiwa 810 VMC BT 40 Swing Arm KOE113 tool changer convert CAT 40 to BT 40

  • Garrett, Indiana, United States
  • Jan 30th
Jacobs Chuck 0085220 CAT V 50 Shell Face Mill Tool Holder 1-1/4" Dia w/5" Proj.

Jacobs Chuck 0085220 CAT V 50 Shell Face Mill Tool Holder 1-1/4" Dia w/5" Proj.

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0064025 VDI 50 Hold In One Tool Holder with 3 to16mm Capacity

Jacobs Chuck 0064025 VDI 50 Hold In One Tool Holder with 3 to16mm Capacity

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0066220 BT 50 Rigid Holder 1 w/M3 to M14 Tap & 179.8mm Proj

Jacobs Chuck 0066220 BT 50 Rigid Holder 1 w/M3 to M14 Tap & 179.8mm Proj

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs 30594 BT 45 - JT5 Toolholder Adapter e

Jacobs 30594 BT 45 - JT5 Toolholder Adapter e

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0065450 DIN 371 Rigid Tap Collet 1, Tap M7 5.5mm Tap Shank 4.3mm

Jacobs Chuck 0065450 DIN 371 Rigid Tap Collet 1, Tap M7 5.5mm Tap Shank 4.3mm

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0065186 ANSI TAP Clutch Collet 2 11/16" Cap 1/2" Shank 2/5" Drive

Jacobs Chuck 0065186 ANSI TAP Clutch Collet 2 11/16" Cap 1/2" Shank 2/5" Drive

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs 0065248 DIN 376 Tap Collet 1 M6 Tap 4.5 MM Shank, 3.4 MM Drive

Jacobs 0065248 DIN 376 Tap Collet 1 M6 Tap 4.5 MM Shank, 3.4 MM Drive

  • Wichita, Kansas, United States
  • Jan 30th
New BT40 ER25 Floating TER Tapping Collet Chuck Holder CNC Milling tool

New BT40 ER25 Floating TER Tapping Collet Chuck Holder CNC Milling tool

  • hongkong, Hong Kong
  • Jan 30th
New BT40 ER20 Floating TER Tapping Collet Chuck Holder CNC Milling tool

New BT40 ER20 Floating TER Tapping Collet Chuck Holder CNC Milling tool

  • hongkong, Hong Kong
  • Jan 30th
BT 40 TOOL HOLDER - 1/2 " - 2 & 1/2 " GAGE - NIKKEN - 981T

BT 40 TOOL HOLDER - 1/2 " - 2 & 1/2 " GAGE - NIKKEN - 981T

  • Bedford, Ohio, United States
  • Jan 30th
BT 40 TOOL HOLDER - 1/2 " - 6 " GAGE - HEAT SHRINK - PARLEC - 981O

BT 40 TOOL HOLDER - 1/2 " - 6 " GAGE - HEAT SHRINK - PARLEC - 981O

  • Bedford, Ohio, United States
  • Jan 30th
BT 40 TOOL HOLDER - 1/4" - 133B

BT 40 TOOL HOLDER - 1/4" - 133B

  • Bedford, Ohio, United States
  • Jan 30th
BT 40 TOOL HOLDER - 3/4 " - 2 & 1/2 " GAGE - NIKKEN - 981Z

BT 40 TOOL HOLDER - 3/4 " - 2 & 1/2 " GAGE - NIKKEN - 981Z

  • Bedford, Ohio, United States
  • Jan 30th
BT 40 TOOL HOLDER - 3/4 " - 3 " GAGE - HEAT SHRINK - PARLEC - 981M

BT 40 TOOL HOLDER - 3/4 " - 3 " GAGE - HEAT SHRINK - PARLEC - 981M

  • Bedford, Ohio, United States
  • Jan 30th
BT 40 TOOL HOLDER - 3/4 " - 6 " GAGE - HEAT SHRINK - PARLEC - 981Q

BT 40 TOOL HOLDER - 3/4 " - 6 " GAGE - HEAT SHRINK - PARLEC - 981Q

  • Bedford, Ohio, United States
  • Jan 30th

People who viewed this item also vieved

Kaiser CAT50 Taper Milling Holder 31 mm 1.220" Inch ID 11.335.308 Bore Pull Stud

Kaiser CAT50 Taper Milling Holder 31 mm 1.220" Inch ID 11.335.308 Bore Pull Stud

  • Windsor, Connecticut, United States
  • Feb 28th
5 VARIOUS CAT 40 TOOL HOLDERS WITH TWO RETENTION KNOBS.

5 VARIOUS CAT 40 TOOL HOLDERS WITH TWO RETENTION KNOBS.

  • Anaheim, California, United States
  • Feb 28th
Valenite, Boring Bar 1-1/4" Shaft Head Is 1-3/8"S-VMSP-15OR-90CC,12T6 Centre-dex

Valenite, Boring Bar 1-1/4" Shaft Head Is 1-3/8"S-VMSP-15OR-90CC,12T6 Centre-dex

  • Marshall, Michigan, United States
  • Mar 5th
KENNAMETAL LATHE TOOL HOLDER SDP-105 SPG322 INSERTS STK2522

KENNAMETAL LATHE TOOL HOLDER SDP-105 SPG322 INSERTS STK2522

  • Wadley, Alabama, United States
  • Mar 5th
MWLNR2525 M08 Indexable turning tool holder 95 Degree for CNC Lathe NEW

MWLNR2525 M08 Indexable turning tool holder 95 Degree for CNC Lathe NEW

  • ShangHai, China
  • Mar 7th
HHIP 3/4 INCH C6 12 PIECE BORING BAR SET (1001-0004)

HHIP 3/4 INCH C6 12 PIECE BORING BAR SET (1001-0004)

  • United States
  • Mar 7th
Bilz WE2 Set, 15 each, Positive Drive Quick Change Adapter Collets, "One Lot"

Bilz WE2 Set, 15 each, Positive Drive Quick Change Adapter Collets, "One Lot"

  • Southaven, Mississippi, United States
  • Mar 9th
Two New NMTB50 DeVLIEG MICROBORE C8 COLLET HOLDERS with 2 Collets, new

Two New NMTB50 DeVLIEG MICROBORE C8 COLLET HOLDERS with 2 Collets, new

  • Farmington, Michigan, United States
  • Mar 9th
CLIMAX C200E-125 SHAFT LOCKING ASSEMBLY, 1 1/4" ID, 2.362" OD

CLIMAX C200E-125 SHAFT LOCKING ASSEMBLY, 1 1/4" ID, 2.362" OD

  • Stockton, California, United States
  • Mar 9th
TB WOODS SG BUSHING SDS118 SDS 118 1-1/8" XLY

TB WOODS SG BUSHING SDS118 SDS 118 1-1/8" XLY

  • Coffeyville, Kansas, United States
  • Mar 9th
Sandvik C6-NC3000-14054-A40 Coromant Capto Adapter

Sandvik C6-NC3000-14054-A40 Coromant Capto Adapter

  • Loves Park, Illinois, United States
  • Apr 22nd
Everede 25020-C6 Carbide Regrindable Blank, Length: 7/16" (Pack of 10)

Everede 25020-C6 Carbide Regrindable Blank, Length: 7/16" (Pack of 10)

  • Duncan, South Carolina, United States
  • Apr 22nd
2Pcs 5/8" Gear Dia Pilot shank T Handle 11 Teeth Grip Metal Drill Chuck Key

2Pcs 5/8" Gear Dia Pilot shank T Handle 11 Teeth Grip Metal Drill Chuck Key

  • HONGKONG, Hong Kong
  • May 28th
Jacobs # 34 Drill Chuck/Key, MT3 Shank, JT33 Mount, 0-1/2" Capacity,NJ,car

Jacobs # 34 Drill Chuck/Key, MT3 Shank, JT33 Mount, 0-1/2" Capacity,NJ,car

  • Hopkinsville, Kentucky, United States
  • May 29th
Valenite CAT 50 1" End Mill Holder V50CT-E100

Valenite CAT 50 1" End Mill Holder V50CT-E100

  • Philadelphia, Pennsylvania, United States
  • May 30th
KENNAMETAL Lathe Tool Holder KM32S25EMCLNL4 - Coolant Through

KENNAMETAL Lathe Tool Holder KM32S25EMCLNL4 - Coolant Through

  • Wilmette, Illinois, United States
  • May 30th
Sunnen 1-1/4" 2G-P28-1250 WB Hone Mandrel

Sunnen 1-1/4" 2G-P28-1250 WB Hone Mandrel

  • Valley View, Pennsylvania, United States
  • May 31st
Sunnen 1-3/4" 2G-P28 1750 WE Hone Mandrel

Sunnen 1-3/4" 2G-P28 1750 WE Hone Mandrel

  • Valley View, Pennsylvania, United States
  • May 31st
500W air cooled 0.5kw milling motor spindle &speed power converter&clamp&collet

500W air cooled 0.5kw milling motor spindle &speed power converter&clamp&collet

  • ???, ???, China
  • Jun 9th
300w 12000RPM Chrome CNC 300W Air Cool Brush Spindle Motor

300w 12000RPM Chrome CNC 300W Air Cool Brush Spindle Motor

  • Beijing, China
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies