JDSU Acterna HST-3000 Tester w/ SIM T1 Service & BRI ISDN Modules HST 3000, US $1,595.00 – Picture 0

JDSU Acterna HST-3000 Tester w/ SIM T1 Service & BRI ISDN Modules HST 3000, US $1,595.00 – Picture 1

JDSU Acterna HST-3000 Tester w/ SIM T1 Service & BRI ISDN Modules HST 3000, US $1,595.00 – Picture 2

JDSU Acterna HST-3000 Tester w/ SIM T1 Service & BRI ISDN Modules HST 3000, US $1,595.00 – Picture 3

JDSU Acterna HST-3000 Tester w/ SIM T1 Service & BRI ISDN Modules HST 3000, US $1,595.00 – Picture 4

JDSU Acterna HST-3000 Tester w/ SIM T1 Service & BRI ISDN Modules HST 3000, US $1,595.00 – Picture 5

JDSU Acterna HST-3000 Tester w/ SIM T1 Service & BRI ISDN Modules HST 3000, US $1,595.00 – Picture 6

JDSU Acterna HST-3000 Tester w/ SIM T1 Service & BRI ISDN Modules HST 3000, US $1,595.00 – Picture 7

Jdsu Acterna Hst-3000 Tester W/ Sim T1 Service & Bri Isdn Modules Hst 3000

US $1,595.00

Toledo, Ohio, United States
Jan 29th

Open on mobile:
QR code

Content on this page requires a newer version of Adobe Flash Player. The Following Items Are Included: JDSU HST-3000 HandHeld Consumer Services Tester w/ Options (BC# 19372) Basic Rate ISDN ISDN PRI User Scripting JDSU HST-3000 SIM T1 Module (BC# 19373) JDSU HST-3000 SIM BRI Module (BC# 19379) JDSU Flash Drive P/N: HST-000-603-01 (2) Bantam To Bantam Cables (2) Ethernet Cables DC Car Charger AC Adapter/Charger Power Cord User Manual On CD-ROM Carrying Case (G) BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! This Item Has A Current Calibration! JDSU HST-3000 HandHeld Consumer Services Tester Installed Options: - Basic Rate ISDN - ISDN PRI - User Scripting Included Modules: - HST-3000 SIM BRI Module (Install and Maintain ISDN BRI Services) - HST-3000 SIM T1 Module (Thorough T1 Testing Including BERT, Loopcodes, and NIU/CSU Emulation) Includes Carrying Case & Accessories As Listed Above! Working Condition: Excellent Condition: Refurbished Calibrated: Yes Warranty: 90 Day Exchange Warranty Acterna HST-3000 Handheld Consumer Services Tester Improving the installation, maintenance and troubleshooting of DSL services With a market primed for broadband, operators are rapidly deploying DSL in their networks to deliver multimedia services over the existing copper wire in the local loop. Traditionally, one set of technicians performed individualized tests that qualified the copper while another set conducted DSL services testing and verification. In today’s market, however, operators can no longer afford the time, capital expense, and labor costs to conduct tests separately and incrementally. Furthermore, test solutions must generate results that have a strategic impact throughout an operator’s entire organization. This may include building customer loyalty by locating and fixing problems quickly, improving profitability by performing more tests with less staff, or leveraging workforce productivity by automating processes, methods, and procedures. The Acterna HST-3000 is a modular handheld tester that can be built to order, to test the copper, test the DSL service and improve the process. Technicians use the HST-3000 copper base instrumentand the copper service interface module (SIM) to qualify, maintain, and troubleshoot the local loop. This same base instrument, with a second SIM that tests both ADSL and the copper, enables one technician to perform tests thatwere previously conducted by two technicians using different equipment. For those technicians who only need to test ADSL, the instrument can be configured for ADSL functionality only. Any HST-3000 module equipped to perform ADSL service tests can also verify ISP and Internet connectivity with the Acterna Advanced IP Suite software option. With the HST-3000 minimize the time and reduce the capital expense and labor cost associated with ADSL and copper testing. Highlights A combined tester for Copper and DSL testing Lower repeat rates with automated close out tests, scripting/pass-fail tests, and back office integration Modular hardware and software architecture is flexible and easily upgraded Laptop/PC integration via RS-232, USB, or wireless for easy results transfer Intuitive, easy-to-use GUI, lightweight, rugged and water resistant Instrument Interface Specifications Dual TIP/RING and Ground POTS/Copper: Color-coded, shrouded 2mm “mini-banana” jacks ADSL: 8-pin modular 10/100 BT Ethernet jack: 8-pin modular Serial port: DB9 female via cable (DCE) USB Host USB Device Bluetooth short-range wireless ADSL Standards ANSI T1.413 ITU G.992. 1 Annex A ADSL over POTS (G.DMT) G.992.2 (G.Lite) Cisco CAP General Specifications Ruggedness: Survives 3-ft drop to concrete on all sides Water-resistance: Splash proof: may be used in heavy rain Language: English Keypad: Typical 12-button keyboard Physical Specifications Size (H x W x D): 9.5 x 4.5 x 2.75 in Weight: 2.7 lb with battery Operating temperature: 22°F to 122°F Storage temperature: –40°F to 150°F Battery life: 10 hrs. typical usage Charging time: 7 hours from full discharge to full charge Operating humidity: 10% to 80% relative humidity Storage humidity: 10% to 95% relative humidity Display: 1/4 VGA monochrome transflective, 3.8-in diagonal (readable in direct sunlight) HST-3000 SIM T1 Service Interface Module Key Features Thorough T1 testing including BERT, loopcodes, and NIU/CSU emulation VT100 emulation for access to T1,HDSL,HDSL2, HDSL2-4 wire performance statistics Lower repeat rates with automated close out tests, scripting, and pass/fail tests loaded with operator specific thresholds for methods and procedures Modular hardware and software architecture allows easy upgrades and enhancements T-BERD® advanced stress patterns, intelligent repeater loop codes, and BERT patterns included NetAnalyst control of Data Network Analyzer test devices The JDSU HST-3000 is the ideal instrument for testing T1 services with built-in functionality that reduces repeat rates, failures, and kickbacks and ensures that all tests are performed the same way, every time. Reduced budgets, smaller workforces, and untrained technicians can limit a carrier’s ability to promptly provision T1 service. Overcoming these obstacles requires resources that facilitate the efficient and rapid deployment of T1 services regardless of whether the T1 line uses traditional repeaters, HDSL, HDSL2, or HDSL2 4-wire circuits. Technicians use the HST-3000 optional copper test features to qualify and troubleshoot the circuit, and the T1 test features to bit-error-rate test (BERT) the line and verify the service. With the VT100 emulation feature, the HST-3000 provides instant access to HDSL/2/4 performance statistics. There is no need for technicians to switch instruments or modules; the HST-3000 combines all the tests into one tool with one common interface. The HST-3000 custom scripting feature automates the testing process, ensuring that tests are done completely and thoroughly every time and helps reduce repeat rates and failures by ensuring that the processes used to test are consistent. With the HST-3000, technicians can complete faster service turn-ups, reduce failure rates, and lower costs, which are all key components to surviving in today’s competitive environment. Loopback Testing Preprogrammed HTU-C, HTU-R, doubler, T1 CSU, T1 NIU, and repeater loopcodes enable the HST-3000 to quickly sectionalize transmission problems. In addition, Pairgain, Teltrend, Adtran, Westell, and ADC equipment specific loopcodes, as well as user configurable loopcodes, are supported. The test set can also emulate T1 customer premises equipment, simulating a CSU or NIU. CSU/NIU emulation allows the test set to be looped up from the central office to verify T1 service across the entire length of the span. Dual T1 Transmit and Receive The HST-3000 dual T1 transmit and receive capabilities give the ability to measure timing slips, passively monitor T1 circuits in both directions, and perform drop and insert testing. Using the split screen view in dual monitor mode, a span is easily sectionalized to quickly determine the location of a fault. Drop and insert testing allows the user to BERT single DS0s within a T1, without taking the entire T1 out of service. HDSL/2/4 Through the test instrument’s VT100 emulation feature, technicians can access HDSL and T1 network equipment for equipment configuration, specific performance data measurements, and loop up capabilities, without having to carry a laptop into the field. With JDSU’s repeater extender, technicians can also gain access to the circuit at T1 repeaters. Fractional T1 The HST-3000 performs fractional T1 (FT1) BER tests on selected channels to verify transmission on contiguous and noncontiguous FT1 bandwidth. This allows the technician to verify circuit performance with VF and 577 Hz ID tones at various output levels. In addition, the HST-3000 uses a variety of advanced stress patterns such as 55 octet, T1-DALY, and other long user patterns as recommended by the ANSI T1.403 standard to stress repeatered T1/FT1 circuits. With its enhanced T1 features and functions, the HST-3000 is the ideal test instrument for technicians to troubleshoot and qualify the line swiftly and effortlessly. Flexible and Rugged Design The HST-3000 incorporates a rugged, weather-resistant design and long battery life that are ideally suited for use in the field and its modularity allows for field upgrades to support new testing requirements. The HST-3000 is easily upgradeable with technologies and advanced options that support the changing needs of service installers and its dynamic configurability allows it to be used by different technicians with different responsibilities to perform a wide number of tests. Standard Ethernet, USB, and serial connections offer flexibility to easily download software and offload captured test data. Overview Beginning with the construction of the circuit, and throughout the life cycle of the service, operators must verify that customers are receiving the quality they ordered. Whether qualifying the copper before handing the circuit over to an installation and maintenance crew, a technician must run a bit-error-rate test (BERT) to prequalify the circuit to ensure that it will run T1 service error free. DS1 BERT To verify proper T1 transmission over a traditional repeatered T1 or an HDSL circuit, a technician needs to test the entire span from the central office to the customer premises. A true end-to-end service test requires stressing the span and verifying the error tolerance of the copper plant and network equipment. The HST-3000 includes the advanced stress patterns of the T-BERD to properly stress the network. HST-3000 BRI SIM Module (install and maintain ISDN BRI services) The HST-3000 ISDN BRI SIM enables you to install and maintain ISDN BRI services. Using the HST with the BRI SIM, you can place, receive, and analyze calls, test data services using BERT analysis, test voice services using a microphone/ speaker audio headset, and monitor physical (layer 1), LAPD (layer 2), and Q.931 (layer 3) results. Features and capabilities Using the ISDN BRI SIM, you can: Store frequently used numbers in a phone book, and then select a number from the phone book when placing a call. Place and receive up to two calls simultaneously using the standard transmit-receive interfaces. After a call is established, you can insert voice traffic into the associated B Channel, or perform BERT analysis of the B Channel. BERT (IDSL) of the physical line. Perform BERT analysis of two B Channels simultaneously. Emulate central office equipment using Line Termination (LT) mode. Emulate terminal equipment devices using Terminal Equipment (TE) mode for a U interface. Process calls for the following switches: AT&T 5ESS Nortel DMS 100 National ISDN-1 (NI-1) and National ISDN-2 (NI-2) compliant switches Siemens EWSD Monitor and analyze ISDN BRI service while the network is in-service. Isolate and locate problems by viewing D channel decode text for all captured transmitted and received frames when you monitor or terminate ISDN BRI service. After viewing the decode text, you can save the text to a file on the HST-3000. Place D channel packet calls on the U or S/T interface, and then send a FOX message to verify that the correct text is received on the far end of the circuit. Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you! Contact: Test Equipment Store eBay Sales Phone: 1-419-517-6681 Toll Free : 1-800-548-2381 We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate". Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information. We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. UPS Ground United States USD 0.00 USPS Express Mail International (EMS) Worldwide USD 0.00 We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Put your listings on autopilot with Kyozou eBay Listing Software

Condition:	Seller refurbished: An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details. ...	Model	HST-3000
Manufacturer	Acterna