JDSU Acterna HST-3000C Tester w/ SIM CU T1 / T3 & BRI ISDN Modules HST 3000, US $2,495.00 – Picture 0

JDSU Acterna HST-3000C Tester w/ SIM CU T1 / T3 & BRI ISDN Modules HST 3000, US $2,495.00 – Picture 1

JDSU Acterna HST-3000C Tester w/ SIM CU T1 / T3 & BRI ISDN Modules HST 3000, US $2,495.00 – Picture 2

JDSU Acterna HST-3000C Tester w/ SIM CU T1 / T3 & BRI ISDN Modules HST 3000, US $2,495.00 – Picture 3

JDSU Acterna HST-3000C Tester w/ SIM CU T1 / T3 & BRI ISDN Modules HST 3000, US $2,495.00 – Picture 4

JDSU Acterna HST-3000C Tester w/ SIM CU T1 / T3 & BRI ISDN Modules HST 3000, US $2,495.00 – Picture 5

JDSU Acterna HST-3000C Tester w/ SIM CU T1 / T3 & BRI ISDN Modules HST 3000, US $2,495.00 – Picture 6

JDSU Acterna HST-3000C Tester w/ SIM CU T1 / T3 & BRI ISDN Modules HST 3000, US $2,495.00 – Picture 7

JDSU Acterna HST-3000C Tester w/ SIM CU T1 / T3 & BRI ISDN Modules HST 3000, US $2,495.00 – Picture 8

Jdsu Acterna Hst-3000c Tester W/ Sim Cu T1 / T3 & Bri Isdn Modules Hst 3000

US $2,495.00

Toledo, Ohio, United States
Jan 29th

Open on mobile:
QR code

Content on this page requires a newer version of Adobe Flash Player. The Following Items Are Included: JDSU HST-3000C HandHeld Consumer Services Tester (BC# 18299) With Options: Web Browser FTP/HTTP Throughput IP Suite Video Micosoft IPTV Analysis RFL User Scripting Spectral Analysis TDR Transmission Impairment Analysis Video Analysis Wide-Band TIMS JDSU HST-3000 SIM T1 / T3 Module (BC# 18159) Acterna HST-3000 BRI Module (BC# 15671) Acterna HST-2500/3000 CU Module (BC# 06974) Test Lead Set (2) Ethernet Cables AC Adapter/Charger Power Cord User Manual On CD-ROM Carrying Case (G) BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! This Item Has A Current Calibration! JDSU Acterna HST-3000C HandHeld Consumer Services Tester Installed Options: - Web Browser - FTP/HTTP Throughput - IP Suite - Video Micosoft IPTV Analysis - RFL - User Scripting - Spectral Analysis - TDR - Transmission Impairment Analysis - Video Analysis - Wide-Band TIMS Included Modules: - JDSU HST-3000 SIM T1 / T3 Module (T1 testing including BERT, loopcodes, and NIU/CSU emulation) - Acterna HST-2500/3000 SIM CU Module (Extended Testing Over Copper) - Acterna HST-3000 SIM BRI Module (Install and Maintain ISDN BRI Services) Includes Carrying Case & Accessories As Listed Above! Working Condition: Excellent Condition: Refurbished Calibrated: Yes Warranty: 90 Day Exchange Warranty Acterna HST-3000 Handheld Consumer Services Tester Improving the installation, maintenance and troubleshooting of DSL services With a market primed for broadband, operators are rapidly deploying DSL in their networks to deliver multimedia services over the existing copper wire in the local loop. Traditionally, one set of technicians performed individualized tests that qualified the copper while another set conducted DSL services testing and verification. In today’s market, however, operators can no longer afford the time, capital expense, and labor costs to conduct tests separately and incrementally. Furthermore, test solutions must generate results that have a strategic impact throughout an operator’s entire organization. This may include building customer loyalty by locating and fixing problems quickly, improving profitability by performing more tests with less staff, or leveraging workforce productivity by automating processes, methods, and procedures. The Acterna HST-3000 is a modular handheld tester that can be built to order, to test the copper, test the DSL service and improve the process. Technicians use the HST-3000 copper base instrumentand the copper service interface module (SIM) to qualify, maintain, and troubleshoot the local loop. This same base instrument, with a second SIM that tests both ADSL and the copper, enables one technician to perform tests thatwere previously conducted by two technicians using different equipment. For those technicians who only need to test ADSL, the instrument can be configured for ADSL functionality only. Any HST-3000 module equipped to perform ADSL service tests can also verify ISP and Internet connectivity with the Acterna Advanced IP Suite software option. With the HST-3000 minimize the time and reduce the capital expense and labor cost associated with ADSL and copper testing. As a widely deployed service, ISDN is a key source of revenue for telecommunication service providers world-wide. This, coupled with today’s reduced budgets and smaller workforces, make it more critical than ever to ensure the timely and successful turn up and maintenance of ISDN service – the first time out. Additionally, thorough ISDN testing can prove more complex than basic physical layer and BER testing for technicians who lack the necessary training. To meet these challenges, an easy-to-use, versatile test solution is required that helps reduce failures and repeat rates while enhancing efficiency and ensuring consistent test practices. The Acterna HST-3000 is a powerful and versatile test instrument for testing ISDN PRI service. Hand-held, rugged and easy-to-use, the HST-3000 is ideal for field use. Its modular design provides a scalable, all-in-one solution for ISDN testing, as well as thorough testing of the facilities over which it is provided. The HST-3000 ISDN PRI option enables testing of Primary Rate ISDN circuits at both the customer site and central office. It supports call placement, receipt, D-Channel Decode analysis for 23B+D, NFAS (Non-Facility Associated Signaling), 24B and backup D channel switching. With the full range of T1 loopcodes and BERT patterns it can also test BER across any combination of channels to verify service before delivery to the customer. Highlights A combined tester for Copper and DSL testing Lower repeat rates with automated close out tests, scripting/pass-fail tests, and back office integration Modular hardware and software architecture is flexible and easily upgraded Laptop/PC integration via RS-232, USB, or wireless for easy results transfer Intuitive, easy-to-use GUI, lightweight, rugged and water resistant Instrument Interface Specifications Dual TIP/RING and Ground POTS/Copper: Color-coded, shrouded 2mm “mini-banana” jacks ADSL: 8-pin modular 10/100 BT Ethernet jack: 8-pin modular Serial port: DB9 female via cable (DCE) USB Host USB Device Bluetooth short-range wireless ADSL Standards ANSI T1.413 ITU G.992. 1 Annex A ADSL over POTS (G.DMT) G.992.2 (G.Lite) Cisco CAP General Specifications Ruggedness: Survives 3-ft drop to concrete on all sides Water-resistance: Splash proof: may be used in heavy rain Language: English Keypad: Typical 12-button keyboard Physical Specifications Size (H x W x D): 9.5 x 4.5 x 2.75 in Weight: 2.7 lb with battery Operating temperature: 22°F to 122°F Storage temperature: –40°F to 150°F Battery life: 10 hrs. typical usage Charging time: 7 hours from full discharge to full charge Operating humidity: 10% to 80% relative humidity Storage humidity: 10% to 95% relative humidity Display: 1/4 VGA monochrome transflective, 3.8-in diagonal (readable in direct sunlight) T1 / T3 Service Interface Module (SIM) Dual TX/RX Bantam T1 Interface and Dual RX/Single TX BNC DS3 Interface/and DS3 Thorough T1 testing including BERT, loopcodes, and NIU/CSU emulation VT100 emulation for access to T1, HDSL, HDSL2, HDSL2- 4 wire performance statistics Copper option adds in-depth copper measurements including DVOM, graphical TDR, RFA/RFL, and load coil counter Lower repeat rates with automated close out tests, scripting, and pass/fail tests loaded with operator specific thresholds for methods and procedures Modular hardware and software architecture allows easy upgrades and enhancements T-BERD® advanced stress patterns, intelligent repeater loop codes, and BERT patterns included Lightweight, rugged, water resistant, and battery powered handheld test instrument NetAnalyst control of Data Network Analyzer test devices HST-3000 BRI SIM Module (install and maintain ISDN BRI services) The HST-3000 ISDN BRI SIM enables you to install and maintain ISDN BRI services. Using the HST with the BRI SIM, you can place, receive, and analyze calls, test data services using BERT analysis, test voice services using a microphone/ speaker audio headset, and monitor physical (layer 1), LAPD (layer 2), and Q.931 (layer 3) results. Features and capabilities Using the ISDN BRI SIM, you can: Store frequently used numbers in a phone book, and then select a number from the phone book when placing a call. Place and receive up to two calls simultaneously using the standard transmit-receive interfaces. After a call is established, you can insert voice traffic into the associated B Channel, or perform BERT analysis of the B Channel. BERT (IDSL) of the physical line. Perform BERT analysis of two B Channels simultaneously. Emulate central office equipment using Line Termination (LT) mode. Emulate terminal equipment devices using Terminal Equipment (TE) mode for a U interface. Process calls for the following switches: AT&T 5ESS Nortel DMS 100 National ISDN-1 (NI-1) and National ISDN-2 (NI-2) compliant switches Siemens EWSD Monitor and analyze ISDN BRI service while the network is in-service. Isolate and locate problems by viewing D channel decode text for all captured transmitted and received frames when you monitor or terminate ISDN BRI service. After viewing the decode text, you can save the text to a file on the HST-3000. Place D channel packet calls on the U or S/T interface, and then send a FOX message to verify that the correct text is received on the far end of the circuit. HST-2500/3000 SIM CU Module The HST’s copper testing features allow quick turn-up and troubleshooting of the services provided over copper. This includes testing with DVOM, opens, power (Mains) influence (PI), noise, balance, time domain reflectometer (TDR), resistive fault locate (RFL), load coil detect, loss, wideband transmission impairment measurement set (WBTIMS), caller ID, and POTS dialer. The HST provides process customization through on-board auto tests and allows workflow improvements via connectivity to craft access terminals and back-office systems. The copper testing features include the following: Measuring AC and DC voltage, current, and resistance Measuring to opens (length of cable) Measuring balance, noise, and power (Mains) influence (PI) Locating cable faults with the TDR or RFL Detecting load coils Measuring loop loss (voiceband) including receiving and sending tones; transmission impairment testing (noise, SNR, return loss) Voice service and caller ID (CLID) testing WBTIMS and WB2 TIMS testing including sending/ receiving tones; measuring wideband, impulse, and spectral noise; and transmission impairment testing (noise, SNR, return loss, crosstalk) Automatic testing using scripts, including POTS close out, good pair check, and wideband auto tests. Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you! Contact: Test Equipment Store eBay Sales Phone: 1-419-517-6681 Toll Free : 1-800-548-2381 We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate". Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information. We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. UPS Ground United States USD 0.00 USPS Express Mail International (EMS) Worldwide USD 0.00 We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Put your auctions on autopilot with Kyozou eBay Auction Tools

Condition:	Seller refurbished: An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details. ...	Model	HST-3000C
Manufacturer	Acterna