JDSU HST-3000C Tester w/ CUADSL2-TX ANX A VDSL-CX/WB2 & HST-CX-VBONDED/WB2, US $2,495.00 – Picture 0

JDSU HST-3000C Tester w/ CUADSL2-TX ANX A VDSL-CX/WB2 & HST-CX-VBONDED/WB2, US $2,495.00 – Picture 1

JDSU HST-3000C Tester w/ CUADSL2-TX ANX A VDSL-CX/WB2 & HST-CX-VBONDED/WB2, US $2,495.00 – Picture 2

JDSU HST-3000C Tester w/ CUADSL2-TX ANX A VDSL-CX/WB2 & HST-CX-VBONDED/WB2, US $2,495.00 – Picture 3

JDSU HST-3000C Tester w/ CUADSL2-TX ANX A VDSL-CX/WB2 & HST-CX-VBONDED/WB2, US $2,495.00 – Picture 4

JDSU HST-3000C Tester w/ CUADSL2-TX ANX A VDSL-CX/WB2 & HST-CX-VBONDED/WB2, US $2,495.00 – Picture 5

JDSU HST-3000C Tester w/ CUADSL2-TX ANX A VDSL-CX/WB2 & HST-CX-VBONDED/WB2, US $2,495.00 – Picture 6

JDSU HST-3000C Tester w/ CUADSL2-TX ANX A VDSL-CX/WB2 & HST-CX-VBONDED/WB2, US $2,495.00 – Picture 7

JDSU HST-3000C Tester w/ CUADSL2-TX ANX A VDSL-CX/WB2 & HST-CX-VBONDED/WB2, US $2,495.00 – Picture 8

Jdsu Hst-3000c Tester W/ Cuadsl2-tx Anx A Vdsl-cx/wb2 & Hst-cx-vbonded/wb2

US $2,495.00

Toledo, Ohio, United States
Jun 9th

Open on mobile:
QR code

Content on this page requires a newer version of Adobe Flash Player. The Following Items Are Included: JDSU HST-3000C HandHeld Consumer Services Tester w/ Options (BC# 20984) Resistive Fault Locator User Scripting Spectral Analysis Time Domain Reflectometer Wide-Band TIMS JDSU HST-3000 SIM CUADSL2-TX ANX A Module (BC# 20985) JDSU HST-3000 SIM VDSL-CX/WB2 Module (BC# 20986) JDSU HST-3000 SIM HST-CX-VBONDED/WB2 Module (BC# 21000) Acterna CopperHead 2109-FED Far End Device 5 Color Test Lead Set RJ45 To 3 Clip Cable (3) Ethernet Cables USB Drive w/ Software JDSU Test Leads To Coax Cable P/N: 21101626-001 AC Adapter/Charger Power Cord User Manual On CD-ROM Strap For Unit Carrying Case w/ Strap BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! This Item Has A Current Calibration! JDSU HST-3000C Handheld Consumer Services Tester w/ JDSU HST-3000 SIM CUADSL2-TX ANX A Module w/ JDSU HST-3000 SIM VDSL-CX/WB2 Module & JDSU HST-3000 SIM HST-CX-VBONDED/WB2 Module Installed Options: - Resistive Fault Locator - User Scripting - Spectral Analysis - Time Domain Reflectometer - Wide-Band TIMS Included Modules: - JDSU HST-3000 SIM CUADSL2-TX ANX A Module (Copper, ADSL, & ADSL2 Testing For Annex A) - JDSU HST-3000 SIM VDSL-CX/WB2 Module (VDSL Testing w/ Conexant Chipset & TDR Wide Band 2 Up to 30MHz Copper Testing) - JDSU HST-3000 HST-CX-VBONDED/WB2 Module (Single pair and bonded VDSL Testing Wide-Band 2 up to 30mb) Includes Acterna CopperHead 2109-FED Far End Device, Carrying Case & Accessories As Listed Above! Working Condition: Excellent Condition: Refurbished Calibrated: Yes Warranty: 90 Day Exchange Warranty JDSU HST-3000 Handheld Consumer Services Tester Improving the installation, maintenance and troubleshooting of DSL services With a market primed for broadband, operators are rapidly deploying DSL in their networks to deliver multimedia services over the existing copper wire in the local loop. Traditionally, one set of technicians performed individualized tests that qualified the copper while another set conducted DSL services testing and verification. In today’s market, however, operators can no longer afford the time, capital expense, and labor costs to conduct tests separately and incrementally. Furthermore, test solutions must generate results that have a strategic impact throughout an operator’s entire organization. This may include building customer loyalty by locating and fixing problems quickly, improving profitability by performing more tests with less staff, or leveraging workforce productivity by automating processes, methods, and procedures. The JDSU HST-3000 is a modular handheld tester that can be built to order, to test the copper, test the DSL service and improve the process. Technicians use the HST-3000 copper base instrumentand the copper service interface module (SIM) to qualify, maintain, and troubleshoot the local loop. This same base instrument, with a second SIM that tests both ADSL and the copper, enables one technician to perform tests thatwere previously conducted by two technicians using different equipment. For those technicians who only need to test ADSL, the instrument can be configured for ADSL functionality only. Any HST-3000 module equipped to perform ADSL service tests can also verify ISP and Internet connectivity with the Acterna Advanced IP Suite software option. With the HST-3000 minimize the time and reduce the capital expense and labor cost associated with ADSL and copper testing. Highlights A combined tester for Copper and DSL testing Lower repeat rates with automated close out tests, scripting/pass-fail tests, and back office integration Modular hardware and software architecture is flexible and easily upgraded Laptop/PC integration via RS-232, USB, or wireless for easy results transfer Intuitive, easy-to-use GUI, lightweight, rugged and water resistant Instrument Interface Specifications Dual TIP/RING and Ground POTS/Copper: Color-coded, shrouded 2mm “mini-banana” jacks ADSL: 8-pin modular 10/100 BT Ethernet jack: 8-pin modular Serial port: DB9 female via cable (DCE) USB Host USB Device Bluetooth short-range wireless ADSL Standards ANSI T1.413 ITU G.992. 1 Annex A ADSL over POTS (G.DMT) G.992.2 (G.Lite) Cisco CAP General Specifications Ruggedness: Survives 3-ft drop to concrete on all sides Water-resistance: Splash proof: may be used in heavy rain Language: English Keypad: Typical 12-button keyboard Physical Specifications Size (H x W x D): 9.5 x 4.5 x 2.75 in Weight: 2.7 lb with battery Operating temperature: 22°F to 122°F Storage temperature: –40°F to 150°F Battery life: 10 hrs. typical usage Charging time: 7 hours from full discharge to full charge Operating humidity: 10% to 80% relative humidity Storage humidity: 10% to 95% relative humidity Display: 1/4 VGA monochrome transflective, 3.8-in diagonal (readable in direct sunlight) SIM CUADSL2-TX ANX A Module The HST’s copper testing features allow quick turn-up and troubleshooting of the services provided over copper. This includes testing with DVOM, opens, power (Mains) influence (PI), noise, balance, time domain reflectometer (TDR), resistive fault locate (RFL), load coil detect, loss, wideband transmission impairment measurement set (WBTIMS), caller ID, and POTS dialer. The HST provides process customization through on-board auto tests and allows workflow improvements via connectivity to craft access terminals and back-office systems. The copper testing features include the following: Measuring AC and DC voltage, current, and resistance Measuring to opens (length of cable) Measuring balance, noise, and power (Mains) influence (PI) Locating cable faults with the TDR or RFL Detecting load coils Measuring loop loss (voiceband) including receiving and sending tones; transmission impairment testing (noise, SNR, return loss) Voice service and caller ID (CLID) testing WBTIMS and WB2 TIMS testing including sending/ receiving tones; measuring wideband, impulse, and spectral noise; and transmission impairment testing (noise, SNR, return loss, crosstalk) Automatic testing using scripts, including POTS close out, good pair check, and wideband auto tests. ADSL is designed to carry a digital signal, over a copper pair, above the voice frequency band (20 KHz–1.1 MHz) to enable high speed internet service over a standard POTS line. This allows “always on” internet access while simultaneously providing voice service. Typical POTS line quality will normally support ADSL, but the DSL service must be tested when trouble strikes. To troubleshoot DSL service, a modem emulation test set, such as the HST-3000, is needed. The DSLAM and network configuration is verified by connecting at the main distribution frame (MDF) where known interference and attenuation are minimal, as shown in Figure 1. The physical (ADSL) layer data rates and noise margins are reviewed to confirm that they match the service contract. Validate correct DSLAM and BRAS provisioning by connecting to the customer line and authenticating with the network through the DSLAM. VDSL-CX/WB2 SIM - Conexant ADSL2+/VDSL2 Testing Wide Band 2 (Up to 30MHz) Copper Test Qualifying a very high speed Digital Subscriber Line (VDSL) service that can transport high definition television (HDTV) and triple-play services requires more than a simple Go/No-Go tester. One lightweight, robust, battery-operated JDSU HST-3000 tester equipped with the Infineon Technologies VDSL2 module offers more capability than any other handheld tester on the market. This tester gives both technicians and telco engineers the confidence and the necessary power to complete the job, and get it done right. JDSU HST-3000 SIM HST-CX-VBONDED-WB2 When used with the HST-3000 this module (Wide-Band 2 up to 30mb) can be used to test single pair and bonded VDSL . The capabilities of the VDSL features include the following: Variety of VDSL testing modes for service verification, local loop testing, and network connectivity. Mode Function VDSL Modem emulate mode Used to test basic VDSL physical layer rates, quality and line statistics. Also used for testing the following types of lines: IP over Ethernet and PPP over Ethernet VDSL Through mode Used for testing the following types of lines: Bridged Ethernet and PPP over Ethernet. Ethernet TE mode Used for testing IP over Ethernet and PPP over Ethernet. Wide range of compatibility with industry standards On-board web browser for validating the customer’s internet connection Trace route and FTP/HTTP throughput capability Customer premise equipment emulation to turn up and troubleshoot VDSL service, including Ethernet terminal equipment (TE) Wide Band 2 (WB2) Complete copper testing to support VDSL/VDSL2 and triple-play deployments Expanded copper testing frequency range Tx/Rx Tones ranging from 100 kHz to 30 MHz Wideband Noise measurements from +15 to -90 dBm Impulse Noise measurements from +15 to -60 dBm Spectral analysis with spectral masks and band plans up to 30 MHz (-28 to -150 dBm/Hz) Wideband copper SIM functionality available in combination with VDSL/VDSL2 test SIMs Fully compatible with the HST-3000-CE and HST-3000C-CE mainframes, the HST-3000WBII SIMincludes an internal copper measurement board that enhances the functionality of the HST-3000C mainframe copper measurement board and adds limited wideband copper test capability to non-copper test mainframes. The WBII SIM features dual Tip & Ring (T&R) and Ground interfaces. Due to high-frequency range and measurement sensitivity, this SIM supports special test cables, which can also be used with existing HST-3000C copper test functions. For the most accurate results, use of specially insulated cables for testing higher frequency services such as VDSL2 is recommended. Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you! Contact: Test Equipment Store eBay Sales Phone: 1-419-517-6681 Toll Free : 1-800-548-2381 We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate". Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information. We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. UPS Ground United States USD 0.00 USPS Express Mail International (EMS) Worldwide USD 0.00 We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Powers Your Online Marketplace Make order management a breeze with Kyozou eBay Order Management Software

Condition:	Seller refurbished: An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details. ...	Brand	JDSU
Model	HST-3000C