JDSU UltraFED IIB 30 MHz Ultra Far End Device 4 HST-3000 HST-3000C HST 3000 2B, US $595.00 – Picture 0

JDSU UltraFED IIB 30 MHz Ultra Far End Device 4 HST-3000 HST-3000C HST 3000 2B, US $595.00 – Picture 1

JDSU UltraFED IIB 30 MHz Ultra Far End Device 4 HST-3000 HST-3000C HST 3000 2B, US $595.00 – Picture 2

JDSU UltraFED IIB 30 MHz Ultra Far End Device 4 HST-3000 HST-3000C HST 3000 2B, US $595.00 – Picture 3

JDSU UltraFED IIB 30 MHz Ultra Far End Device 4 HST-3000 HST-3000C HST 3000 2B, US $595.00 – Picture 4

Jdsu Ultrafed Iib 30 Mhz Ultra Far End Device 4 Hst-3000 Hst-3000c Hst 3000 2b

US $595.00

Toledo, Ohio, United States
Jan 29th

Open on mobile:
QR code

Content on this page requires a newer version of Adobe Flash Player. The Following Items Are Included: JDSU UltraFED IIB Far End Device (BC# 19188) RJ45 To Multi-Clip Test Cable P/N: 21149996-002 Hard Copy User Manual Case For Unit BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! JDSU UltraFED IIB 30 MHz Far End Device For Use With HST-3000 & HST-3000C Mainframes (HST-3000 & HST-3000C Mainframes Not Included In Sale!) Technicians can remotely control the UltraFED IIB with the HST-3000 to test all DSL service varieties, including single- and bonded-pair VDSL2/ADSL2+ as well as legacy HDSL Includes Case For Unit & Accessories As Listed Above! Working Condition: Excellent Condition: Refurbished Warranty: 90 Day Exchange Warranty JDSU UltraFED IIB 30 MHz Far-End Device Various DSL access technologies, such as VDSL2 bonding and vectoring, exploit existing copper and hybrid fiber-copper infrastructures letting service providers deliver higher-bandwidth IP video and multimedia content to their customers. Yet delivering the high quality of service (QoS) that customers expect requires accuracy that surpasses single-ended copper-loop testing limitations. Accurately testing for wideband services requires changing far-end line conditions based on the tests performed, which can be both time-consuming and costly. Few technicians possess the field expertise needed and declining training budgets only further exacerbate the copper testing problem. The JDSU UltraFED IIB Far-End Device paired with the JDSU HST-3000 fills this critical testing need because it is like having an “expert-in-a-box”. The UltraFED IIB connects to the far end of the pair under test while the HST-3000 controls it remotely. One technician with one piece of equipment can now perform two-ended pair testing. Additionally, the UltraFED IIB can measure true near-end (NEXT) and far-end crosstalk (FEXT) for bonded VDSL and ADSL by terminating a second pair. For ultimate flexibility, the UltraFED IIB operates in two modes: passive mode where the HST-3000 activates the UltraFED IIB remotely for dual-ended testing and through mode where it automatically activates as needed to reduce downtime when troubleshooting marginal failures. Isolating certain types of copper faults such as service-impacting bridged taps, splice failures, or cable sheath damage can be particularly troublesome, The OneCheck™ Copper Test Suite option for the HST-3000 simplifies this process and reduces fault repair times through seven diagnostics that run to an UltraFED IIB at the far end. Copper Testing is More Important than Ever Dual-Ended Testing is Better … and Smarter New VDSL2 technologies such as DSL bonding and vectoring are enabling higher bandwidths for service providers to deliver multimedia content to end users. However, to deliver the performance advantages that the new technologies offer, copper-loop testing and maintenance are more important than ever before. In the past, single-ended copper-loop testing was often perceived as just as reliable and faster than dual-ended testing. In reality, technicians who test only from one end often misdiagnose faults on higher-bandwidth circuits, such as VDSL2. Technicians conducting dual-ended tests using an HST-3000 to remotely command the UltraFED IIB at the far end can isolate customer-affecting fault conditions that otherwise go undetected during turn-up and installation or during routine copper troubleshooting. During Installation and troubleshooting, technicians who test to an UltraFED IIB over the loop reduce drive-time and, ultimately, repeat dispatches. This testing method provides accurate terminations and remote test capabilities, including strap (short), open, drop battery, and tones, letting technicians quickly isolate faults and identify noise. Bonded Pair Turn-up and Fault Isolation DSL-bonding technologies, according to ITU-T G.998.1, G.998.2, and G.998.3, leverage the existing technology by logically combining signals from two wire pairs to effectively double the downstream and upstream bit rates delivered to the user. However, several factors such as pair quality, frequency, and distance can affect the actual delivery rates. Optimal bandwidth delivery requires accurately testing bonded pairs. However, qualifying individual copper pairs at the physical layer fails to reveal a potentially adverse interaction, called crosstalk, between the bonded pairs when both are carrying xDSL service. The effects of crosstalk remain undetected until bringing up bonded service between the modem and DSLAM. The ability to assess crosstalk between two candidate pairs prior to provisioning can save significant time, minimize pair swapping efforts, and lower repeat rates. Using the UltraFED IIB with a companion HST-3000 lets technicians measure both FEXT and NEXT from a single end by generating a tone on one pair while simultaneously terminating the second pair. The HST-3000 detects coupling at the near end (for NEXT) or from the far end (for FEXT) from one pair of wires to another and measures noise on another pair of wires at the near end. Multiple Measurements are Better than Just One When testing copper pairs, making pass or fail decisions from one test result alone, such as attenuation, stress, or TDR, can lead to erroneous or incomplete conclusions. The resistive, capacitive, and inductive characteristics of each conductor in the pair as well as the similarity of one conductor to the other (pair balance) can affect DSL performance. When troubleshooting or qualifying copper pairs, experienced technicians know that achieving the most accurate and trustworthy results in determining a pair’s health requires comparing multiple measurements. OneCheck Copper Test Suite offers a set of applications that can help technicians isolate faults up to three times faster than running separate tests. Each automated test in the OneCheck Copper Test Suite runs on an HST-3000 paired with a companion UltraFED IIB to assess either overall pair quality or to isolate specific fault types. OneCheck Copper Test Suite OneCheck Test Tests Runs Test Objective OneCheck Copper for DSL Foreign voltage (AC) Foreign voltage (DC) Resistance Longitudinal balance Series fault Opens Load coil Bridged tap Loop resistance Wideband noise (per band) Wideband impulse noise Wideband SNR Wideband balance Wideband NEXT/FEXT Power influence Circuit noise Wideband loss Determines overall pair(s) health over the DSL technology provided and includes thresholds and filters set by technology. Lets users save results after test. Helps to identify shorts, grounds, opens one-sided opens, cable length, battery crosses, balance, splice failures, load coils, bridged taps/laterals, crosstalk, power influence, impulse-noise events, and excessive insertion loss. OneCheck Series Fault Longitudinal balance (to open) Longitudinal balance (to short) Tip resistance Ring resistance Checks for series fault presence, typically from splice failures where one conductor has greater resistance (in series) than the other conductor. Helps to identify bad splices and series-resistance faults OneCheck Bridged Tap TDR Opens (capacitance) Determines bridged tap (lateral) existence on the pair, the distance to it, as well as its length OneCheck TrueLength Opens Distance to short TDR to open TDR to short Provides actual pair length by correlating capacitive and resistive and TDR loop measurements along with a confidence percentage. OneCheck RFL Pretest Circuit resistance Loop resistance Indicates whether a resistive fault was found and identifies which test to run next, RFL or K-Test, or to isolate the fault. OneCheck Kick Test Foreign voltage (AC) Foreign voltage (DC) Circuit resistance Opens Capacitive Balance Longitudinal balance Quick copper-check test to assess the pair’s health before final test. UltraFED IIB is not required for this test. OneCheck Shield Test RFL Determines resistance from the HST-3000 to the UltraFED IIB. Like Having a “Copper Expert in a Box” HST-3000 TDR Helper Reduces Fault-Isolation Time Identifying the end of copper pairs can be challenging even for expert technicians. To simplify fault location, the HST-3000 offers a unique feature that users can enable in the HST-3000 TDR menu called “TDR Helper”. TDR Helper sends DTMF tones to a remote UltraFED IIB to alternately open and short the line across tip/ring (or A/B) helping technicians identify the end of the cable pair by simply observing the dip up (open)/dip down (shorted) status. TDR Helper uniquely saves time and simplifies tip/ring (A/B) fault-finding when identifying load coils, wet sections, splices, and bridged taps. Everything Field Technicians Need to Install and Repair Copper Technicians can remotely control the UltraFED IIB with the HST-3000 to test all DSL service varieties, including single- and bonded-pair VDSL2/ADSL2+ as well as legacy HDSL. Technicians can use the HST-3000 Manual FED commands to set the test mode, tone frequency and duration, terminate the line with the correct impedance, and send a “wake-up” tone to UltraFED IIB before running the test. Or they can simply run a OneCheck automated test to automatically configure the test according to the technology being tested. The HST-3000 can isolate pairs, drop the telco/exchange battery, provide the strap for resistive fault location tests, send tone/ trace tone to the UltraFED IIB for the appropriate line condition, termination, and filters at the far end to achieve the most highly accurate test results. UltraFED IIB Test Mode Functions UltraFED IIB Test Mode Test Mode Function Single Tone Connects a tone generator across tip (A) to ring (B) to measure loss Trace Tone 1 Connects a tone generator across tip (A) to ring (B) and sends 577 and 1004 Hz tones at cadence 1 Trace Tone 2 Connects a tone generator across tip (A) to ring (B) and sends 577 and 1004 Hz tones at cadence 2 Balance Single Tone Connects a tone from tip (A) to ring (B) to ground to assess line balance in the xDSL frequency range Quiet Termination Terminates the pair at the FED Open All Disconnects tip (A), ring (B), and ground (sleeve) from the cable pairs to isolate the pair under test Tip-Ring Short Also called strap mode. Connects tip (A) to ring (B) and is used with loop resistance or RFL measurements Tip-Ring-Gnd Short Connects tip (A), ring (B), and ground (sleeve) to ground and is used while measuring resistive balance RFL 3-Way Strap Connects tip (A) to T1 to ring (B) and is used primarily for measuring RFL on a verified good pair TDR Helper Continuously opens and shorts the pair to identify the pair’s end Off/Thru Connects tip (A) and ring (B) to the CO tip (A) and ring (B) to maintain “in-service” customer connection and “out-of-service” as necessary during test UltraFED IIB – Offers Best Way to Help Techs Work Like Experts An UltraFED IIB simplifies two-ended testing with a single technician. The UltraFED IIB connects to the far end of the pair under test while the HST-3000 controls it remotely via DTMF tones. One piece of equipment can now perform two-ended pair testing, which is critical for accurately qualifying or repairing copper pairs for VDSL2 and bonded VDSL2 spans carrying wideband multimedia content. Complete with the HST-3000 along with the OneCheck Copper Test Suites, dualended testing with an UltraFED IIB is better and smarter, and makes it even simpler for providers to eliminate repeat dispatches by making sure tests are done right the first time. Features: With JDSU HST-3000 OneCheck, it provides diagnostics to quickly identify typical copper faults Second-pair operation to accurately assess the effects of near-end and far-end crosstalk Both manual and automated operation modes Remote strap (short), open, drop battery and transmit tones, and trace tone Supports wide frequency ranges from POTS (200 Hz) to VDSL2 (30 MHz) Easily view pair endings with TDR Helper, which automatically shorts and opens the pair New command mode lets technicians start and stop tests during execution without waiting for the previous test to complete Key benefits: Faster and more accurate than a single-ended test Eliminate driving to change line conditions Remotely set correct line terminations per technology Built for the future — includes crosstalk tests for VDSL2 and ADSL2+ bonded pairs Through-mode operation takes customers out of service only when necessary Specifications: General Size 152 x 101 x 38 mm (6 x 4 x 1.6 in) Weight 226.80 g (8 oz) Battery life 20 hours of continuous use Battery shelf life 2 months installed (20 hours of continuous use) Operating temperature range –18 to –60°C (–0 to 140°F) Storage temperature range –40 to –75°C (–40 to 165°F) Humidity range 10 to 95% RH noncondensing Tone transmit 200 Hz to 30 MHz ±0.015% at 0 dBm; trace tone (2 cadences) Voiceband (POTS) frequency range 200 Hz to 20 kHz/600 ? Wideband (xDSL) frequency range 10 kHz to 30 MHz/100 ? Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you! Contact: Test Equipment Store eBay Sales Phone: 1-419-517-6681 Toll Free : 1-800-548-2381 We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate". Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information. We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. Shipping Rate Calculator Enter your ZIP/POSTAL code: Select your COUNTRY: United States Canada United Kingdom Afghanistan Albania Algeria American Samoa Andorra Angola Anguilla Antigua and Barbuda Argentina Armenia Aruba Australia Austria Azerbaijan Republic Bahamas Bahrain Bangladesh Barbados Belarus Belgium Belize Benin Bermuda Bhutan Bolivia Bosnia and Herzegovina Botswana Brazil British Virgin Islands Brunei Darussalam Bulgaria Burkina Faso Burma (Myanmar) Burundi Cambodia Cameroon Cape Verde Cayman Islands Central African Republic Chad Chile China Christmas Island Cocos (Keeling) Islands Colombia Comoros Congo, Democratic Republic of the Congo, Republic of the Cook Islands Costa Rica Cote d Ivoire (Ivory Coast) Croatia, Democratic Republic of the Cuba Cyprus Czech Republic Denmark Djibouti Dominica Dominican Republic Ecuador Egypt El Salvador Equatorial Guinea Eritrea Estonia Ethiopia Falkland Islands (Islas Makvinas) Fiji Finland France French Guiana French Polynesia Gabon Republic Gambia Georgia Germany Ghana Gibraltar Greece Greenland Grenada Guadeloupe Guam Guatemala Guernsey Guinea Guinea-Bissau Guyana Haiti Honduras Hong Kong Hungary Iceland India Indonesia Iran Iraq Ireland Israel Italy Jamaica Japan Jersey Jordan Kazakhstan Kenya Kiribati Kuwait Kyrgyzstan Laos Latvia Lebanon Lesotho Liberia Libya Liechtenstein Lithuania Local State/Province Luxembourg Macau Macedonia Madagascar Malawi Malaysia Maldives Mali Malta Marshall Islands Martinique Mauritania Mauritius Mayotte Mexico Micronesia, Federated States of Moldova Monaco Mongolia Montenegro Montserrat Morocco Mozambique Namibia Nauru Nepal Netherlands Netherlands Antilles New Caledonia New Zealand Nicaragua Niger Nigeria Niue North Korea Norway Oman Other Pakistan Palau Panama Papua New Guinea Paraguay Peru Philippines Poland Portugal Puerto Rico Qatar Romania Russian Federation Rwanda Saint Helena Saint Kitts Saint Lucia Saint Pierre and Miquelon Saint Vincent and the Grenadines Samoa San Marino Saudi Arabia Senegal Serbia, Republic Of Seychelles Sierra Leone Singapore Slovakia Slovenia Solomon Islands Somalia South Africa South Korea Spain Sri Lanka Sudan Suriname Svalbard Swaziland Sweden Switzerland Syria Taiwan Tajikistan Tanzania Thailand Togo Tonga Trinidad and Tobago Tunisia Turkey Turkmenistan Turks and Caicos Islands Tuvalu Uganda Ukraine United Arab Emirates Uruguay Uzbekistan Vanuatu Vatican City State Venezuela Vietnam Virgin Islands (U.S.) Wallis and Futuna Western Sahara Yemen Zambia Zimbabwe We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Put your listings on autopilot with Kyozou eBay Listing Tools

Condition:

Seller refurbished: An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details. ...

Model

UltraFED IIB