JDSU UltraFED IIB 30 MHz Ultra Far End Device w/21118326-001 and extra batteries, US $500.00 – Picture 0

JDSU UltraFED IIB 30 MHz Ultra Far End Device w/21118326-001 and extra batteries, US $500.00 – Picture 1

JDSU UltraFED IIB 30 MHz Ultra Far End Device w/21118326-001 and extra batteries, US $500.00 – Picture 2

JDSU UltraFED IIB 30 MHz Ultra Far End Device w/21118326-001 and extra batteries, US $500.00 – Picture 3

JDSU UltraFED IIB 30 MHz Ultra Far End Device w/21118326-001 and extra batteries, US $500.00 – Picture 4

JDSU UltraFED IIB 30 MHz Ultra Far End Device w/21118326-001 and extra batteries, US $500.00 – Picture 5

JDSU UltraFED IIB 30 MHz Ultra Far End Device w/21118326-001 and extra batteries, US $500.00 – Picture 6

JDSU UltraFED IIB 30 MHz Ultra Far End Device w/21118326-001 and extra batteries, US $500.00 – Picture 7

JDSU UltraFED IIB 30 MHz Ultra Far End Device w/21118326-001 and extra batteries, US $500.00 – Picture 8

JDSU UltraFED IIB 30 MHz Ultra Far End Device w/21118326-001 and extra batteries, US $500.00 – Picture 9

JDSU UltraFED IIB 30 MHz Ultra Far End Device w/21118326-001 and extra batteries, US $500.00 – Picture 10

Jdsu Ultrafed Iib 30 Mhz Ultra Far End Device W/21118326-001 And Extra Batteries

US $500.00

Sarasota, Florida, United States
Mar 6th

Open on mobile:
QR code

For sale is an Ultra Far End Device IIB (JDSU UltraFED IIB) The item is Used not in original packaging. The device is in working order. Included is the UltraFED IIB Device, Case, Original paperwork (Including Calibration Document), and the clips, plus an extra set of clips with a missing green end and another set of JDSU clips with one red one black and one green end ---------------------------------------- OVERVIEW: Ultra Far End Device IIB (UltraFED IIB) Dual-ended copper testing with an UltraFED IIB can isolate customer-affecting fault conditions that otherwise go undetected during turn-up and installation or routine copper troubleshooting. The UltraFED IIB connects to the far end of copper pairs under test while a single technician controls it remotely using the HST-3000. Benefits Reduces back-and-forth drive time to change line conditions Provides line terminations and remote test capabilities Built for the future -- isolates crosstalk for VDSL2/ADSL2+ bonded pairs Thru-mode operation takes customers out of service only when necessary Greatly simplifies fault isolation and identification for less-skilled technicians OneCheck™ diagnostics identify faults up to three times faster Applications Second-pair operation to accurately assess the effects of near-end crosstalk (NEXT) and far-end crosstalk (FEXT) Remotely, from the JDSU HST-3000, provide strap (short), open, drop battery, transmit tones and trace tones View pair endings with TDR Helper, enabled on the HST-3000, which provides alternating short and open to the pair OneCheck Copper Test Suite provides simple diagnostic tests that isolate typical faults a technician encounters every day OneCheck Copper for DSL - Determines overall pair(s) health over the DSL technology provided with thresholds and filters set by technology OneCheck Series Fault - Check for series fault presence, typically from splice failures OneCheck Bridged Tap - Determines bridged tap (lateral) existence on the pair with distance to and length of tap OneCheck TrueLength - Provides actual pair length by correlating capacitive, resistive and TDR loop measurements OneCheck RFL Pretest - Indicates whether a resistive fault was found and identifies to run next to precision locate it OneCheck Kick Test - Quick copper-check to assess the pair's health prior to final test OneCheck Shield Test - Determines resistance from the HST-3000 to the UltraFED IIB

Condition:

Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...

Model

UltraFED IIB