Jdsu Validator Pro Nt1155 Network Lan Ethernet Cable Tester Nt 1155 Nt-1155

US $1,995.00

Toledo, Ohio, United States
Aug 17th

Open on mobile:
QR code

The Following Items Are Included: JDSU NT1155 Validator Pro-NT Network LAN Tester (BC# 7116A-L/T*) Power Meter Wavelengths: 850nm 1300nm 1310nm 1490nm 1550nm JDSU NT1025 Validator Pro-NT Remote (BC# 7116B-L/T*) JDSU Remote Adapters #1-8 (2) RJ45 To Multiple Clip Cables (2) TP74 Sacrificial cables (2) Ethernet Cables (2) RJ11 Patch Cables (2) AC Adapter/Charger (2) Power Cords USB PC Interface Cable User Manual On CD-ROM Carrying Case w/ Strap BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! This Item Has A Current Calibration! JDSU Validator Pro-NT NT1155 Network / LAN Cable Tester The ValidatorPRO performs all tests offered by the Validator and Validator-NT, including speed certifying the data-carrying capabilities of copper Ethernet network cables up to 1 Gb/s by testing for noise in the network, detecting faults in the cabling wiring, and ensuring that cables can support the speed capabilities of active equipment. The ValidatorPRO-NT version includes a comprehensive set of features for testing a network’s active network capabilities: measure Power over Ethernet (PoE) to ensure the correct power is available on the correct pins, use port discovery to ensure the correct speed and duplex capability are available Power Meter: - 850nm - 1300nm - 1310nm - 1490nm - 1550nm Includes Carrying Case & Accessories As Listed Above! Working Condition: Excellent Condition: Refurbished Calibrated: Yes Warranty: 1 YEAR WARRANTY JDUS Validator Pro-NT NT1155 Building on the capabilities of the JDSU Validator and Validator-NT, the JDSU ValidatorPRO series of Ethernet Network Management Tools offers a complete solution to test copper and fiber Ethernet cables. The ValidatorPRO Ethernet speed certifier with integrated optical power meter and accompanying Plan-Um cable management software delivers the power to test both copper and fiber cabling, determine if cables can support Gigabit Ethernet, and perform troubleshooting for cable installations. The ValidatorPRO performs all tests offered by the Validator and Validator-NT, including speed certifying the data-carrying capabilities of copper Ethernet network cables up to 1 Gb/s by testing for noise in the network, detecting faults in the cabling wiring, and ensuring that cables can support the speed capabilities of active equipment. To certify Ethernet speed performance of cable runs, the ValidatorPRO series of handheld testers conducts bit error rate (BER) tests by sending data packets down specified cable runs at defined data rates to check for errors at the maximum throughput of the link. The ValidatorPRO also reports on signal quality that can impact high-speed data transmission by measuring signal-to-noise ratio (SNR). Skew measurements provide the signal time delay between pairs that can impact Ethernet data transmission. The ValidatorPRO also provides continuity testing that detects opens, shorts, miswires, split pairs, reversals, and high-resistance faults while accurately measuring distance to faults and total cable length. The ValidatorPRO includes an integrated optical power meter that measures optical power at 850/1300/1310/1490/1550 nm on multimode or single-mode fiber to address an increasing number of Ethernet networks that now include optical links. The ValidatorPRO-NT version includes a comprehensive set of features for testing a network’s active network capabilities: measure Power over Ethernet (PoE) to ensure the correct power is available on the correct pins, use port discovery to ensure the correct speed and duplex capability are available; connect at gigabit Ethernet and run ping tests to verify connectivity to IP hosts; discover network devices using Cisco Discovery Protocol (CDP) or Link Layer Discovery Protocol (LLDP), discovery and display essential information regarding functionality and configuration of 802.11 b/g/n networks. Features: Measures optical power on single mode and multimode fiber Conducts BER testing to speed certify Ethernet data transmission speed up to 1000BASE-T (1 Gb/s) Measures SNR and skew to uncover impairments to electrical Ethernet data transmission Tests for opens, shorts, split pairs, miswires, and reversals and measures distance to opens and shorts—supports all copper network, telco, and coax cables Applications: Certify speed capability of electrical Ethernet cable runs to support 10/100/1000 Mb/s Ethernet applications Ensure configuration and connectivity with active network devices Measure optical power and insertion loss Discover and display essential information regarding functionality of 802.11 b/g/n wireless devices Document network topology including moves, adds, and changes Specifications: General Display Color back-lit FSTN liquid crystal display (LCD) Operating System Linux Keypad Full navigations set with alphanumeric data entry and soft-key functions Memory Non-volatile memory: internal NAND flash memory Volatile memory: 128 MByte DDR2 SDRAM memory Languages supported (GUI) English, French, Italian, German, Spanish, Portuguese, Korean, and Simplified Chinese Interfaces - USB 2.0 host port (for external memory sticks) - Optical Power meter for 850/1300/1310/1490/1550 nm wavelengths. –45 to +10 dBm dynamic range for 850 nm and -50 to +10 dBm for all other frequencies. ±0.20 dB accuracy. ±0.06 dB linearity. Measured in dB or dBm. Auto wavelength selection with 270, 330, 1 k, 2 kHz modulation - Wi-Fi 2.4 GHz 802.11 b/g/n standards with MIMO technology. Support 64/128-bit WEP encryption, WPA, WPA2, and CISCO CCX security Test Connectors – 8-position shielded modular jack (data) – 6-position modular jack (telephone) – F-coax (video) Male connector w/sacrificial adapter – 2.5 mm universal push pull (UPP) (Fiber Cable Types – Shielded or unshielded twisted pair network cable – Telephone – Coax – Single-mode and multimode fiber cable Cable Length Maximum cable length: 2,000 ft (600 meters) Maximum cable length for testing of split pairs: Up to 100 meters (327 ft),depending upon cable type Cable length accuracy ±5% (after performing both unit and cable calibration) Electrical Power sources: AC adapter; auto cigarette lighter power adapter; lithium-ion rechargeable, removable batteries Environmental Operating temperature 0 to 50°C (32 to 122°F) (normal operation, not charging battery) 0 to 45°C (32 to 113°F) (charging battery) Storage temperature -20 to 60°C (–4 to 140°F) Operating humidity 10 to 85% RH, non-condensing Shock and Vibration minimum 2 ft drop (free fall from stationary) on concrete Safety: EN 61010-1 EMI/EMC EN 61326-1:2006 Altitude: 4000 m Agency Certifications and Compliance Main and Remote units: CE Battery CE AC wall adapter: CE, PSE, UL Auto cigarette lighter power: CE Calibration Traceable Calibration Period: 2 Years Self-Calibration Period: 30 days for unit calibration Perform cable calibration whenever changing cable type being measured Physical Main Unit Size 22.9 x 11.4 x 5.3 cm (9 x 4.5 x 1.8 in) Weight 710 gm (1 lb 9 oz) with battery Remote Size 14.2 x 11.2 x 4.4 cm (5.6 x 4.4 x 1.8 in) Weight 341 gm (12 oz) with battery For full JDSU NT1155 product specifications, please click here: JDSU NT1155 Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you! We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate". Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information. We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Sell Smarter with Kyozou. Inventory and Ecommerce Management

Condition:	Seller refurbished: The item has been restored to working order by the eBay seller or a third party. This means the item was inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See seller’s listing for full details. ...	Brand	JDSU
Model	NT1155
MPN	Does not apply