Jet Lube Ncs-30 Anti-seize Non-conductive Thread Compound 5 Gallon

US $84

Houston, Texas, United States
May 28th

Open on mobile:
QR code

Starting bid is put at the price it is to cover shipping cost. NCS-30 NONCONDUCTIVE THREAD COMPOUND DESCRIPTION NCS-30 nonconductive thread compound is a premium quality, nonmetallic compound containing carbon based fibers and additives and other natural extreme pressure and anti-wear additives. These are blended into JET-LUBE’s high temp calcium complex base grease. This new base grease offers the additional advantage of superior adhesion to wet steel surfaces, resistance to water wash-off, and most drilling muds. Especially effective for invert or high-pH muds. • Contains nometals • NSFH2Registered • Extreme-pressure additives provide additional protection against seizing and galling • Nonc onductive for MWD applications • Provides maximum protection on Wedge ThreadTM* drill NCS-30 is formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces. As stress levels rise above 50% of yield, the friction factor increases, limiting downhole makeup. Full hydraulic joint efficiency is maintained allowing joint shoulder faces to mate completely without standoff or deformation. NCS-30, with frictional properties similar to KOPR-KOTE, has been designed to utilize the makeup charts in API RP7G multiplied by its 1.15 friction factor on API connections. Premium drill string connections such as HI-TORQUE (HT), eXtreme Torque (XT), and XT-MTM connections, etc., utilize make-up torques based upon thread compound friction factors of 1.0. Therefore, use the torque provided by the premium connection manufacturer. Adjusting make- up torque based on thread compound friction factor may still be advised. Friction factors for NCS-30 were developed using full scale API tool Joint connections. • For a “Yellow”-rated product, use NCS-30 ECFTM. • Designed for optimum performance on all Rotary-Shouldered connections such as Tool Joints and Drill Collars. It can also be used on premium/proprietary thread designs such as Double-Shouldered, Wedge ThreadTM*, and other types of mechanical seal designs. It may also be used on certain non-interference tubing thread designs when properly torque compensated. PRODUCT CHARACTERISTICS * Trademark of Hydril Company Jet-Lube, Inc. makes the Limited Express Warranty that at the date of delivery this product shall be free from defects in Jet-Lube, Inc. materials and workmanship. This Limited Express Warranty is expressly in lieu of any other express or implied warranties, including any implied warranty of merchantability or fitness for a particular purpose, and of any other obligation on the part of Jet-Lube, Inc. The sole remedy for breach of the Limited Express Warranty shall be the refund of the purchase price. All other liability is negated and disclaimed, and Jet-Lube, Inc. shall not be liable for incidental or consequential damages. Thickener Fluid Type Dropping Point (ASTM D-2265) Specific Gravity, typical Density (lb/gal), typical Oil Separation (ASTM D-6184) WT. % LOSS at 212°F (100°C) Flash Point (ASTM D-92) NLGI Grade Penetration at 77°F (ASTM D-217) Copper Strip Corrosion (ASTM D-4048) Friction Factor * Calcium Complex Petroleum >450°F (230°C) 1.30 10.95 <3.0 >430°F (221°C) 1 300 - 330 1A, typical 1.15 (drill strings) Consult Manufacturer -20°F (-29°C) to 500°F (260°C) -65°F (-54°C) Relative to API RP 7G Proprietary Connections Service Temperature Oilfield/Mining/Construction Drilling Industrial Anti-seize Applications 2600°F (1427°C) Shelf Life: Minimum two years from manufacture date. Many factors such as pipe size, thread geometry, drilling mud contamination, etc. affect the friction factor. This is a relative number and in all applications experience and prior knowledge should be used to adjust make-up torque accordingly. PACKAGING Container Size: 5 gallon Has and is stored in an indoor, climate controlled building.