Jvc Br-dv600ua Professional Video Cassette Recorder, W/pwr. Cord, & Manual

US $440

Fort Worth, Texas, United States
Jun 9th

Open on mobile:
QR code

I have a JVC BR-DV600UA professional video cassette recorder acquired from a city-owned tv station. It does come with a new power cord and the original manual. The only testing done was I connected it to a video camera and recorded a short video (the A side) and played it back and it worked fine with what I did. I did not test any other feature. The hour meter on the drum says 675 hours. Please see the last pictures. The professional recorder, the power cord, and the manual are all that is included with this listing. I ship often and quickly. Local pick-up is fine. I live in Ft. Worth, TX. Shipments going to a Texas address will have an 8.25% tax. May go USPS or Fedex and require a signature. Thanks for looking at my store! The following specs are from JVC: BR-DV600UA SPECIFICATIONS General Power requirements: AC 120 V, 50/60 Hz, DC 12 V (11 V to 17 V) Power consumption: Approx. 35 W Dimensions: 215 (W) x 88 (H) x 324.5 (D) mm (8-1/2" x 3-1/2" x 12-13/16') Weight: Approx. 4 kg (8.8 lbs.) Temperature Operating: SIC to 40'C (41 IF to 104'F) Storage: -20'C to 60'C (-4,F to 140'F) Humidity Operating: 30% to 80% RH Storage: 85% RH or less Format: DV format Signal format: NTSC Usable tape: Mini DV tape Tape width: 6.35 mm Tape speed: 18.8 mm/sec. (SP mode) Record/play time: 60 minutes (with an MDV-60 tape) FF/rewind time: Within 120 sec. (with an MDV-60 tape) [Video] Video signal recording format: 8-bit, 13.5 MHz, 4:1:1 component recording Sampling frequency: Y: 13.5 MHz, R-Y/B-Y: 3.375 MHz Video inputs Analog composite: 1.0 Vp-p, 75 ohms Analog Y/C: Y: 1.0 Vp-p, 75 ohms C: 0.286 Vp-p, 75 ohms Analog component: Y: 1.0 Vp-p, 75 ohms, R-Y/B-Y: 0.7 Vp-p, 75 ohms External sync input: 0.286 Vp-p, 75 ohms Video output Analog composite: 1.0 Vp-p, 75 ohms Analog Y/C: Y: 1.0 Vp-p, 75 ohms, C: 0.286 Vp-p, 75 ohms Analog component: Y: 1.0 Vp-p, 75 ohms R-Y/B-Y: 0.7 Vp-p, 75 ohms [Audio] Audio signal recording format: 16-bit, 48 kHz for two channels or 12-bit, 32 kHz PCM for four channels Frequency response: 20 Hz to 20 kHz, +1.0/-5 dB (I 6 bits) Dynamic range: 85 dB or more (PCM audio) Audio input Line: -6 dB, high impedance, unbalanced Mic: -50 dB, high impedance, unbalanced Audio output Line: -6 dB, low impedance, unbalanced Monitor: -6 dB, low impedance, unbalanced Headphone: - infinity to -17 dBs, 8 ohms Time code Output: 0 ± 3 dBs, low impedance, balanced Input: BNC connector [Connectors] IEEE 1394 interface: 4-pin RS-422 interface: D-sub 9-pin JVC bus connector: DIN 12-pin Accessories Instruction manual x 1 AC cable x I Options RM-G30U remote control unit SA-K46U RS-232C interface board