+ Post new Ad
Kennametal 3/4" Carbide Coolant Thru Drill 6xD LONG 140 Deg TiAlN B978A19050, US $400 – Picture 0
Kennametal 3/4" Carbide Coolant Thru Drill 6xD LONG 140 Deg TiAlN B978A19050, US $400 – Picture 0

Kennametal 3/4" Carbide Coolant Thru Drill 6xd Long 140 Deg Tialn B978a19050

US $400

  • Mount Gilead, North Carolina, United States
  • Jun 18th
Open on mobile:
QR code
These Drills Retail for over $800 Drill Bit Size (mm) 19.05 Drill Bit Size (Inch) 3/4 Drill Bit Size (Decimal Inch) 0.7500 Drill Point Angle 140 Drill Bit Material Solid Carbide Drill Bit Finish/Coating TiAlN Flute Type Spiral Cutting Direction Right Hand Shank Type Straight Through Coolant (Yes/No) Yes Point Type Standard Flute Length (Decimal Inch) 5.8268 Overall Length (Decimal Inch) 7.8740 Spiral Type Regular Spiral Shank Diameter (mm) 20.00 Shank Diameter (Decimal Inch) 0.7874 Maximum Drilling Depth (Decimal Inch) 4.8820 Shank Length (Decimal Inch) 1.9685 Drill Point Length (mm) 4.09 Drill Point Length (Decimal Inch) 0.1610 Web Configuration Parallel Drill Bit Diameter Tolerance (mm) +0.008 to +0.029 Web Thinning Web-Thinned Material Grade KC7315 Series/List B978A

Directions

Similar products from Coolant Gun Drills

GUHRING 17/64" RT100X- 6.75MM Carbide Coolant Drill

GUHRING 17/64" RT100X- 6.75MM Carbide Coolant Drill

  • Houston, Texas, United States
  • Jun 19th
Seco Coolant Drill Bit SD203A-02813-098-0315R1

Seco Coolant Drill Bit SD203A-02813-098-0315R1

  • Burlington, Vermont, United States
  • Jun 19th
KENNAMETAL .3465" Dia ( 8,8mm) Coolant Through Carbide Drill

KENNAMETAL .3465" Dia ( 8,8mm) Coolant Through Carbide Drill

  • Houston, Texas, United States
  • Jun 19th
USED CARBOLOY 2.250"+/- INSERT COOLANT DRILL 2-1/4" (QCMX 08) 638-1-69

USED CARBOLOY 2.250"+/- INSERT COOLANT DRILL 2-1/4" (QCMX 08) 638-1-69

  • Fairfield, Iowa, United States
  • Jun 19th
INGERSOLL DRILL 0.750"

INGERSOLL DRILL 0.750"

  • San Diego, California, United States
  • Jun 19th
INGERSOLL DRILL 0.938"

INGERSOLL DRILL 0.938"

  • San Diego, California, United States
  • Jun 19th
INGERSOLL DRILL 1.187"

INGERSOLL DRILL 1.187"

  • San Diego, California, United States
  • Jun 19th
INGERSOLL DRILL 1.187"

INGERSOLL DRILL 1.187"

  • San Diego, California, United States
  • Jun 19th
MITSUBISHI DRILL 0.650"

MITSUBISHI DRILL 0.650"

  • San Diego, California, United States
  • Jun 19th
.3437" KENNAMETAL K225A02188 Solid Carbide Drills, Coolant Through. Lot Of 5.

.3437" KENNAMETAL K225A02188 Solid Carbide Drills, Coolant Through. Lot Of 5.

  • Corona, California, United States
  • Jun 19th
Seco Indexable Insert Drill .906" Dia 3xD Perfomax SD503 0906 272 1000R7 CNC

Seco Indexable Insert Drill .906" Dia 3xD Perfomax SD503 0906 272 1000R7 CNC

  • Mount Gilead, North Carolina, United States
  • Jun 18th
SPADE DRILL HOLDERS TAPER SHANK STRAIGHT FLUTE STANDARD LENGTH

SPADE DRILL HOLDERS TAPER SHANK STRAIGHT FLUTE STANDARD LENGTH

  • Hot Springs National Park, Arkansas, United States
  • Jun 18th
UNIMERCO OCERA SOLID CARBIDE COOLANT FED DRILL 17.5MM

UNIMERCO OCERA SOLID CARBIDE COOLANT FED DRILL 17.5MM

  • Cadiz, Kentucky, United States
  • Jun 18th
Starcut .728 Carbide Tipped Gun Drill 4.5" cut length

Starcut .728 Carbide Tipped Gun Drill 4.5" cut length

  • Minneapolis, Minnesota, United States
  • Jun 18th
USED KENDEX METCUT 21.00mm 474-521 INSERT DRILL with 1.00" SHANK .8268"

USED KENDEX METCUT 21.00mm 474-521 INSERT DRILL with 1.00" SHANK .8268"

  • Fairfield, Iowa, United States
  • Jun 18th
USED KENDEX METCUT 11/16" INSERT DRILL 273-3068 .6875" (A-187-BD)

USED KENDEX METCUT 11/16" INSERT DRILL 273-3068 .6875" (A-187-BD)

  • Fairfield, Iowa, United States
  • Jun 18th
SECO Perfomax 17mm Indexable Drill 4xD Coolant Fed (SD504-17-68-25R7)

SECO Perfomax 17mm Indexable Drill 4xD Coolant Fed (SD504-17-68-25R7)

  • Round Lake, Illinois, United States
  • Jun 18th
USED ISCAR 37.00mm DZ037-111-32-06 INSERT DRILL 1.457" (WOLH-GF 06T304)

USED ISCAR 37.00mm DZ037-111-32-06 INSERT DRILL 1.457" (WOLH-GF 06T304)

  • Fairfield, Iowa, United States
  • Jun 18th
WELL USED ISCAR 7/8" DR088-263-125-2 INSERT DRILL .875" (SOMT 060204)

WELL USED ISCAR 7/8" DR088-263-125-2 INSERT DRILL .875" (SOMT 060204)

  • Fairfield, Iowa, United States
  • Jun 18th
NEW Ingersoll 25/32" Indexable Drill 2.5xD Coolant Fed (B07801921RS1)

NEW Ingersoll 25/32" Indexable Drill 2.5xD Coolant Fed (B07801921RS1)

  • Round Lake, Illinois, United States
  • Jun 18th

People who viewed this item also vieved

Drillco 1312A132 1/2" Extended Length Drill Bit 9" Flute 12" Overall

Drillco 1312A132 1/2" Extended Length Drill Bit 9" Flute 12" Overall

  • Dawsonville, Georgia, United States
  • Jan 30th
3/8" EXTRA LONG MORSE TAPER #1 DRILL BIT 11-1/2" OAL MT#1 MACHINIST TOOLS

3/8" EXTRA LONG MORSE TAPER #1 DRILL BIT 11-1/2" OAL MT#1 MACHINIST TOOLS

  • Punta Gorda, Florida, United States
  • Jan 30th
Michigan Drill High Speed #3MT Taper Shank, Extra Length Drill 15OAL # 15 29/32

Michigan Drill High Speed #3MT Taper Shank, Extra Length Drill 15OAL # 15 29/32

  • Wainfleet, Ontario, Canada
  • Jan 30th
Jobber Length Drills #61 HSS 118D Oxide 11/16" LOC x 1-5/8" OAL QTY 13 <1917>

Jobber Length Drills #61 HSS 118D Oxide 11/16" LOC x 1-5/8" OAL QTY 13 <1917>

  • Saint Louis, Missouri, United States
  • Jan 30th
Jobber Length Drill Bit #T 0.3580&#034; 118 Deg HSS Oxide USA Qty 4 [053]

Jobber Length Drill Bit #T 0.3580" 118 Deg HSS Oxide USA Qty 4 [053]

  • Saint Louis, Missouri, United States
  • Jan 30th
Jobber Length Drill Bits 25/64&#034; 0.3906&#034; 118 Deg HSS Bright USA Qty 4 [053]

Jobber Length Drill Bits 25/64" 0.3906" 118 Deg HSS Bright USA Qty 4 [053]

  • Saint Louis, Missouri, United States
  • Jan 30th
1 NEW 38 MM ALLIED SPADE DRILL INSERT BITS. 153A-38-HI AMEC {D853}

1 NEW 38 MM ALLIED SPADE DRILL INSERT BITS. 153A-38-HI AMEC {D853}

  • Mentor, Ohio, United States
  • Jan 30th
1 NEW 94 MM ALLIED SPADE DRILL INSERT T. SUPER COBALT. 137A-94 AMEC {E127}

1 NEW 94 MM ALLIED SPADE DRILL INSERT T. SUPER COBALT. 137A-94 AMEC {E127}

  • Mentor, Ohio, United States
  • Jan 30th
1 NEW 56 MM ALLIED SPADE DRILL INSERT BITS. 434T-56 AMEC {D874}

1 NEW 56 MM ALLIED SPADE DRILL INSERT BITS. 434T-56 AMEC {D874}

  • Mentor, Ohio, United States
  • Jan 30th
Cleveland 16142 2165TN No.27 (.1440) Screw Machine, Parabolic Drills Lot of 10

Cleveland 16142 2165TN No.27 (.1440) Screw Machine, Parabolic Drills Lot of 10

  • Attleboro, Massachusetts, United States
  • Jan 30th
Cleveland 16140 2165TN No.25 (.1495) Screw Machine, Parabolic Drills Lot of 10

Cleveland 16140 2165TN No.25 (.1495) Screw Machine, Parabolic Drills Lot of 10

  • Attleboro, Massachusetts, United States
  • Jan 30th
Cleveland 16139 2165TN No.24 (.1520) Screw Machine, Parabolic Drills Lot of 10

Cleveland 16139 2165TN No.24 (.1520) Screw Machine, Parabolic Drills Lot of 10

  • Attleboro, Massachusetts, United States
  • Jan 30th
Solid carbide 9/16&#034; drill

Solid carbide 9/16" drill

  • Bangor, Maine, United States
  • Jan 30th
ISCAR 1&#034; 4 flute Roughing and Finishing Solid Carbide Endmill (EFSI-B44)

ISCAR 1" 4 flute Roughing and Finishing Solid Carbide Endmill (EFSI-B44)

  • Fort Worth, Texas, United States
  • Jan 30th
5/8&#034; DATA FLUTE CNC 4-FLUTE SOLID CARBIDE END MILL

5/8" DATA FLUTE CNC 4-FLUTE SOLID CARBIDE END MILL

  • Cadiz, Kentucky, United States
  • Jan 30th
LOT OF 6 HSS 3MT TWIST DRILLS 29/32&#034; TO 1-3/64&#034; NATIONAL MORSE DORMER

LOT OF 6 HSS 3MT TWIST DRILLS 29/32" TO 1-3/64" NATIONAL MORSE DORMER

  • Ellington, New York, United States
  • Jan 30th
LOT OF 3 CLE-FORGE HSS HEAVY DUTY 4MT TWIST DRILLS 1-3/32&#034; TO 1-1/2&#034;

LOT OF 3 CLE-FORGE HSS HEAVY DUTY 4MT TWIST DRILLS 1-3/32" TO 1-1/2"

  • Ellington, New York, United States
  • Jan 30th
LOT OF 7 HSS REDUCED SHANK TWIST DRILLS 23/32&#034; TO 1-11/64&#034; CHICAGO-LATROBE

LOT OF 7 HSS REDUCED SHANK TWIST DRILLS 23/32" TO 1-11/64" CHICAGO-LATROBE

  • Ellington, New York, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies