+ Post new Ad
Kennametal 3/4" Endmill KISR075AD160F3-7016CF8 MS-1861, US $50.00 – Picture 0
Kennametal 3/4" Endmill KISR075AD160F3-7016CF8 MS-1861, US $50.00 – Picture 0

Kennametal 3/4" Endmill Kisr075ad160f3-7016cf8 Ms-1861

US $50.00

  • Knoxville, Tennessee, United States
  • Jan 30th
Open on mobile:
QR code
Kennametal 3/4" Endmill KISR075AD160F3-7016CF8 MS-1861 This item has never been used but sat in a tool draw for a little while.  Ready for work.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Material Carbide
Manufacturer Kennametal

Directions

Similar products from Solid Carbide Drill Bits

30 pieces Brass Wire Rotary FLAT BRUSH Cups brushes 3mm shank 3 size

30 pieces Brass Wire Rotary FLAT BRUSH Cups brushes 3mm shank 3 size

  • ??, China
  • Jan 30th
SOLID CARBIDE broken tools NO INSERTS

SOLID CARBIDE broken tools NO INSERTS

  • Hamlin, New York, United States
  • Jan 30th
SNAP-ON 8 PIECE SOLID CARBIDE BURR SET VWB800D

SNAP-ON 8 PIECE SOLID CARBIDE BURR SET VWB800D

  • Jessup, Maryland, United States
  • Jan 30th
5/16 MITSUBISHI Carbide Coolant Drill 2F MWS03125LB VP15TF

5/16 MITSUBISHI Carbide Coolant Drill 2F MWS03125LB VP15TF

  • Windsor, Connecticut, United States
  • Jan 30th
12.50MM SANDVIK Carbide Drill 2F R840-1250-30-A1A 1220

12.50MM SANDVIK Carbide Drill 2F R840-1250-30-A1A 1220

  • Windsor, Connecticut, United States
  • Jan 30th
GARR TOOL 1" dia solid carbide 230 ma

GARR TOOL 1" dia solid carbide 230 ma

  • Woodinville, Washington, United States
  • Jan 30th
30 x Diamond coated 4MM CYLINDRICAL cylinder rotary drill bit burr burrs point

30 x Diamond coated 4MM CYLINDRICAL cylinder rotary drill bit burr burrs point

  • ??, China
  • Jan 30th
4 pcs Diamond coated Mixed Round ball style Shaft size 6mm Jewelry Bits Tools

4 pcs Diamond coated Mixed Round ball style Shaft size 6mm Jewelry Bits Tools

  • ??, China
  • Jan 30th
18.80MM SANDVIK Carbide Drill 2F R840-1880-50-A1A 1220

18.80MM SANDVIK Carbide Drill 2F R840-1880-50-A1A 1220

  • Windsor, Connecticut, United States
  • Jan 30th
M12x1.75 AccuThread Carbide Thread Mill 4F AM210

M12x1.75 AccuThread Carbide Thread Mill 4F AM210

  • Windsor, Connecticut, United States
  • Jan 30th
SUMITOMO 5DRZ51-2 11m to 14mm SOLID CARBIDE STEP DRILL ( FACTORY REGRIND )

SUMITOMO 5DRZ51-2 11m to 14mm SOLID CARBIDE STEP DRILL ( FACTORY REGRIND )

  • Greensboro, North Carolina, United States
  • Jan 30th
15MM SANDVIK Carbide Drill 2F R840-1500-30-A1A 1220

15MM SANDVIK Carbide Drill 2F R840-1500-30-A1A 1220

  • Windsor, Connecticut, United States
  • Jan 30th
MA Ford 5/64" Carbide Drill - Hi Tuff- NEW -Old stock

MA Ford 5/64" Carbide Drill - Hi Tuff- NEW -Old stock

  • Santee, California, United States
  • Jan 30th
DRILL 12.2 MM ( .4803 ) SOLID CARBIDE 2 1/4" FLUTE LGTH 4 1/8 " OVERALL LGTH

DRILL 12.2 MM ( .4803 ) SOLID CARBIDE 2 1/4" FLUTE LGTH 4 1/8 " OVERALL LGTH

  • Clayton, Indiana, United States
  • Jan 30th
DRILL SANDVIK CORODRILL R840-0930-30-A1A 9.3MM DELTA-C COOLANT FED CARBIDE

DRILL SANDVIK CORODRILL R840-0930-30-A1A 9.3MM DELTA-C COOLANT FED CARBIDE

  • Clayton, Indiana, United States
  • Jan 30th
DRILL SANDVIK R840-0913-70-A1A 9.13MM ( 23/64" ) DELTA-C COOLANT FED CARBIDE

DRILL SANDVIK R840-0913-70-A1A 9.13MM ( 23/64" ) DELTA-C COOLANT FED CARBIDE

  • Clayton, Indiana, United States
  • Jan 30th
10MM CARBIDE SHORT STUB DRILL BIT HRC45 (1PC) CNC MILLING DRILLING LATHE #H7620

10MM CARBIDE SHORT STUB DRILL BIT HRC45 (1PC) CNC MILLING DRILLING LATHE #H7620

  • Hong Kong, Hong Kong
  • Jan 30th
14MM Garr Tool Solid Carbide Drill, Extra Long

14MM Garr Tool Solid Carbide Drill, Extra Long

  • Abingdon, Maryland, United States
  • Jan 30th
10 Pcs Burrs Set (3MM) 1/8" Tungsten Carbide Rotary Burrs (2.35MM) Shank

10 Pcs Burrs Set (3MM) 1/8" Tungsten Carbide Rotary Burrs (2.35MM) Shank

  • hong kong, Hong Kong
  • Jan 30th
Mini Press Drilling 2x0.7mm 2x0.8mm 2x1.0mm 2x1.2mm 2x1.4mm PCB Drill Bits

Mini Press Drilling 2x0.7mm 2x0.8mm 2x1.0mm 2x1.2mm 2x1.4mm PCB Drill Bits

  • Guang Zhou, China
  • Jan 30th

People who viewed this item also vieved

Morse taper Drill bits lot of 10

Morse taper Drill bits lot of 10

  • Garden City, Idaho, United States
  • May 19th
Chicago-Latrobe type 120, 49746, Taper Length Bit, 23/32, HSS, Black Oxide

Chicago-Latrobe type 120, 49746, Taper Length Bit, 23/32, HSS, Black Oxide

  • Saint Mary, Missouri, United States
  • May 19th
Huot Morse Taper Shank and Taper Length Drill Bit Index for Sizes 49/64" to 1"

Huot Morse Taper Shank and Taper Length Drill Bit Index for Sizes 49/64" to 1"

  • United States
  • May 20th
New 1pcs HSS Chamfer End mill Cutter Dia 25mm 90 degree 1Flute Countersink Bit

New 1pcs HSS Chamfer End mill Cutter Dia 25mm 90 degree 1Flute Countersink Bit

  • CN, China
  • May 21st
KEO 55419 Cobalt Steel Single-End Countersink

KEO 55419 Cobalt Steel Single-End Countersink

  • Lakeland, Florida, United States
  • May 21st
NYTD Set High Speed Three Flute Countersinks 60 Degree Included Angle

NYTD Set High Speed Three Flute Countersinks 60 Degree Included Angle

  • Bloomburg, Texas, United States
  • May 22nd
DORMER A125 HSS Extra Length Drill 3/32in x 160mm (5 Total units)

DORMER A125 HSS Extra Length Drill 3/32in x 160mm (5 Total units)

  • Caledon Village, Ontario, Canada
  • Jun 19th
Bran New GUHRING Long Parabolic drills 2.3 mm dia.(0.90")

Bran New GUHRING Long Parabolic drills 2.3 mm dia.(0.90")

  • Charlotte, North Carolina, United States
  • Jun 20th
5 pcs DORMER 9/64" x 8" Overall HSS Extra Long Taper Length Twist Drills Bits

5 pcs DORMER 9/64" x 8" Overall HSS Extra Long Taper Length Twist Drills Bits

  • Champlain, New York, United States
  • Jun 21st
KOMET KUB 665/A2 Indexable Drill, Used

KOMET KUB 665/A2 Indexable Drill, Used

  • Greenlawn, New York, United States
  • May 25th
2 TITEX PLUS DRILLS #A6485 TFT 6.5 MM CARB. COOLANT FEED DRILL TFT COATED

2 TITEX PLUS DRILLS #A6485 TFT 6.5 MM CARB. COOLANT FEED DRILL TFT COATED

  • Springfield, New Hampshire, United States
  • May 25th
VP-GDR 8.7MM VP 6296 Parabolic Drill OSG *** 1 DRILL *** Coolant Thru

VP-GDR 8.7MM VP 6296 Parabolic Drill OSG *** 1 DRILL *** Coolant Thru

  • Minneapolis, Minnesota, United States
  • May 25th
19/32" x 6" EIP HS USA precision

19/32" x 6" EIP HS USA precision

  • Auburn, Washington, United States
  • May 27th
Dormer A554 Cobalt Steel Jobber Drill Bit, 21 MM, ADX Style, TiAlN Coat, Coolant

Dormer A554 Cobalt Steel Jobber Drill Bit, 21 MM, ADX Style, TiAlN Coat, Coolant

  • Arnold, Missouri, United States
  • May 27th
Drill Index HUOT * Letter * Number * Fractional * All Metal Design

Drill Index HUOT * Letter * Number * Fractional * All Metal Design

  • Grants Pass, Oregon, United States
  • May 27th
NEW AMERICAN MADE 3/4" STANDARD STUB (SCREW MACHINE LENGTH) DRILL

NEW AMERICAN MADE 3/4" STANDARD STUB (SCREW MACHINE LENGTH) DRILL

  • Leland, Illinois, United States
  • May 28th
15/16" Heavy Duty Cobalt 135° Notched Point Stub Length Drill USA #600C-15/16

15/16" Heavy Duty Cobalt 135° Notched Point Stub Length Drill USA #600C-15/16

  • Mart, Texas, United States
  • May 28th
Walter A249TFL-NO22 Parabolic Stub Drill

Walter A249TFL-NO22 Parabolic Stub Drill

  • Latonia, Kentucky, United States
  • May 28th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies