Kenwood Nx-800k, 40 Watt, Uhf 450-520 Mhz, 512 Channel Nexedge Digital Radio

US $229.00

Loganville, Georgia, United States
Jul 8th

Open on mobile:
QR code

FREE PROGRAMMING - SEE DETAILS BELOW Kenwood NX-800HK, 40 Watt, UHF 450-520 Mhz, 512 Channel Nexedge Digital Radio ***RefitRadio.com radios are pre-owned OEM radios, each one is bench tested by factory-trained technicians before it is sold. Unless otherwise stated these units may have minor cosmetic blemishes consistent with a used product. The 6-month warranty covers the radio and internal component failure; it excludes physical/water damage and accessories. The Kenwood NX-800 is a UHF (400-470 & 450-520 Mhz), 512 CH Nexedge Digital radio - available in 30 and 45 watts. The NX-800 is capable of LTR Trunking or Conventional integrations. NX-800 mobiles provide the performance, power and quality for reliable communications in a wide range of mobile radio applications. What's Included: Kenwood NX-800HK Mounting Bracket Palm Mic Power Cord 6 MONTH WARRANTY Radio Features: Power: NX800H = 40 Watts Channels: 512 CH / 128 Zone / 250 CH max per zone Body Dimensions (inches): 6-5/16" W x 1-1/16" H x 5-3/8" Weight: 2.6lbs Narrowband Compliant – 12.5 kHz and 25 kHz channel spacing Additional Radio Features: GENERAL FEATURES • 30W / 50W (136-174 MHz) Models • 30W / 45W (400-470, 450-520 MHz) Models • 512 CH-GID / 128 Zones • Dash & Remote Mount • 14 Character Alphanumeric Aliases • Backlit Dot Matrix LCD • 3-Digit Sub-Display • Function/Status LCD Icons • RSSI Indicator • Date & 12/24 Hour Time Clock • Transmit/Busy/Call Alert/Warn LED • On/Off Power Control • 4 Up/Down Selectors • 6 Front PF Keys • Emergency/AUX Key • 4W Speaker Audio • Emergency Call Features • Lone Worker • Multi-Language Display • Programmable TX/RX Indication (On/Off) • Special Alert Tone Patterns • Time Out Timer • Busy Channel Lockout • DB-25 Accessory Connector • 9 Programmable AUX I/Os • 2 Programmable AUX Outputs • Ignition Sense • Public Address / Horn Alert Option • MIL-Spec Standard Mic • MIL-Spec 12-Key DTMF Mic Option • KPG-111D Windows® FPU • Flash Firmware Upgrading • Front Panel Test & Tune • Cloning • MIL-STD-810 C/D/E/F • MIL-STD “Driven-Rain” • IP-54/55 Water & Dust Intrusion • Easy Option Port • PC Serial Interface • SDM Manual Input1 • Transparent Data Mode1 • GPS Receiver Option • VGS-1 Voice Guide / Voice & GPS Data DIGITAL – COMMON NXDN® Digital Air Interface • AMBE+2TM VOCODER 6.25 & 12.5 kHz Channels Over-the- Air Alias Paging Call Emergency Call All Group Call Status Messaging Remote Stun/Kill Remote Check1 Short & Long Data Messages GPS Location with Voice1 NXDN® Scrambler Included (Conventional: per CH) DIGITAL CONVENTIONAL MODE 64 Radio Access Numbers (RAN) • DTMF (Encode/Decode) Individual & Group Selective Call • Mixed FM/Digital Operation DIGITAL TRUNKING MODE Individual Private Call Group Call Broadcast Call Transmission Trunked Mode2 • Message Trunked Mode Call Queuing with Priority2 • Call Queue Pre-emption2 Late Entry (UID & GID)2 4 Priority Monitor ID’s2 Remote Group Add1 Failsoft Mode Multi-Site IP Network Compatible SCAN Single Zone / Multi-Zone / List Scan Dual Priority Scan (Conventional) FM MODES - GENERAL 25 & 12.5 kHz Channels • FleetSync®/II DTMF Encode/Decode Companded Audio Voice Inversion Scrambler Encryption/ANI Board Control FM CONVENTIONAL ZONES QT / DQT Two-Tone Decode Single/Two-Tone Encode • Call Key 1-6 Operator Selectable Tone FM LTR® TRUNKED ZONES Kenwood LTR® Features FleetSync®/II (FM) PTT ID Digital ANI Selective Call & Group Call Status Messaging Emergency Status Caller ID Display Short Text Messages Power On/Off Status Messages Input/Output Status Messages Send/Display GPS PTT ID & Emergency GPS Reporting Status Message Block GPS Reporting Ignition On/Off GPS Reporting Ebay Programming Policy: By requesting free programming you understand we are providing a normally paid service as a free service. We will program 5 Channels (RX, TX and PL tones only). If you want more than 5 channels programmed you can either ship us a radio to clone or email us the codeplug you want in the radio. The codeplug must align with the exact radio model. After you place your order you will need to either put your programming information in the purchase notes (RX,TX and Tones) or promptly request our programming form. Due to eBay guidelines we must process order with 24hrs. If we do not receive your programming information/request within 24 hours it is likely the radio will ship un-programmed. You must provide accurate programming information - we will simply program your radio with the information you provide. We will not be held responsible for inaccurate programming information and returns will not be accepted for programming related issues. In addition, we will not pay for any shipping costs related to programming errors or related issues. Any programming change requests made after the radio is shipped will result in additional costs, not limited to shipping and tech time. This is a free service; any negative feedback related to programming will be contested. NX800, NX-800, 800, NX 800

“Pre-owned, Very Good Condition - Bench tested by factory trained techs - 6 Month Warranty”

Model

NX-800HK

Brand

Kenwood

MPN

Does not apply

Type

Mobile/In-Vehicle

Frequency Band(s)

UHF