+ Post new Ad
Killion / Davis Standard 8" Flexible Lip Sheet Extrusion Extruder Die., US $4,500.00 – Picture 0
Killion / Davis Standard 8" Flexible Lip Sheet Extrusion Extruder Die., US $4,500.00 – Picture 0

Killion / Davis Standard 8" Flexible Lip Sheet Extrusion Extruder Die.

US $4,500.00

  • Houston, Texas, United States
  • Aug 11th
Open on mobile:
QR code
8" flexible lip stainless sheet die. A threaded adapter plate is bolted on the back of the die. It was made by Davis-Standard / Killion and has the serial number on the die. This die can make mono-layer sheet with the capability to make multi-layer co-extruded sheet with an added extruder and feed block. Die gap is .026" maximum (open) to make 10-26 mil sheet or .5 - 10 mil cast film . It can be tightened down to reduce the gap to make thin sheet or cast film. The die is in excellent condition. It was used 3-4 times in our film and sheet extrusion lab for unfilled, non-abrasive, non-corrosive polypropylene.  Die has been cleaned and is in excellent condition. Lips have no nicks or wear. The inside of the die is shiny but the RA # is unknown. It comes with four wired cartridge heaters. The die will require a thermocouple but the receptacle is on the die. Die has new end plate gaskets installed. There is one small bolt in the lower section of the die that broke off but its absence affects nothing and can be replaced if desired.  Lower lip is in excellent condition. This die was/is $12,000 new and is every bit as nice as a new one. 
“The die is in excellent condition. It was used 3-4 times in our film and sheet extrusion lab for unfilled, non-abrasive, non-corrosive polypropylene. Die has been cleaned and is in excellent condition. Lips have no nicks or wear. The inside of the die is shiny but the RA # is unknown.”
Country/Region of Manufacture United States
MPN Does Not Apply
Item Type Extrusion Sheet Die
Brand Killion Davis Standard

Directions

Similar products from Molds, Forms & Ejection Pins

6" Killion / Davis-Standard adjustable lip sheet die. 

6" Killion / Davis-Standard adjustable lip sheet die. 

  • Houston, Texas, United States
  • Sep 1st
PCS Company SP3-62 1/32 Dia. Ejector Pin Shouldered 1/4 Head 6" Long Lot Of 8

PCS Company SP3-62 1/32 Dia. Ejector Pin Shouldered 1/4 Head 6" Long Lot Of 8

  • Middlebury, Indiana, United States
  • Aug 20th
ThermOweld 600301010000 M-101 Exothermic Mold #6 SOL #14-#10 STR to 3/4"-3-1/2"

ThermOweld 600301010000 M-101 Exothermic Mold #6 SOL #14-#10 STR to 3/4"-3-1/2"

  • Kansas City, Kansas, United States
  • Aug 17th
Lot Of (17) Mold/Die Ejector Pins some labeled DME

Lot Of (17) Mold/Die Ejector Pins some labeled DME

  • Dousman, Wisconsin, United States
  • Aug 15th
BYLD - Green Detergent Bucket - 3 Quart Cleaning Pail (3)

BYLD - Green Detergent Bucket - 3 Quart Cleaning Pail (3)

  • Multiple Locations, United States
  • Aug 14th
Small Red and Green, Detergent and Sanitizing Bucket - 3 Quart Cleaning Pail - S

Small Red and Green, Detergent and Sanitizing Bucket - 3 Quart Cleaning Pail - S

  • Multiple Locations, United States
  • Aug 13th
(Qty of 4) Progressive Components EP281L18 Mold Die Ejector Pin 9/32" X 18" Long

(Qty of 4) Progressive Components EP281L18 Mold Die Ejector Pin 9/32" X 18" Long

  • Garnett, Kansas, United States
  • Aug 10th
Injection Mold "Beer Icicle" 2 cavity hotrunner

Injection Mold "Beer Icicle" 2 cavity hotrunner

  • High Point, North Carolina, United States
  • Aug 3rd
Exothermic Mold 35 SQ MM Run to 35 SQ MM Tap M-3022

Exothermic Mold 35 SQ MM Run to 35 SQ MM Tap M-3022

  • Chillicothe, Missouri, United States
  • Jul 27th
96" ADJUSTABLE BOTTOM PRESS BRAKE DIE: STOCK #12039

96" ADJUSTABLE BOTTOM PRESS BRAKE DIE: STOCK #12039

  • Toledo, Ohio, United States
  • Jul 23rd
16' (192") ACUTE BOTTOM PRESS BRAKE DIE: STOCK 13030

16' (192") ACUTE BOTTOM PRESS BRAKE DIE: STOCK 13030

  • Toledo, Ohio, United States
  • Jul 23rd
16' (192") GOOSENECK 90 DEGREE PRESS BRAKE DIE SET; TOP & BOTTOM DIE: STOCK 1302

16' (192") GOOSENECK 90 DEGREE PRESS BRAKE DIE SET; TOP & BOTTOM DIE: STOCK 1302

  • Toledo, Ohio, United States
  • Jul 23rd
Primitive Metal Spoon Used In Sand Casting.

Primitive Metal Spoon Used In Sand Casting.

  • Richmond, Indiana, United States
  • Jul 20th
BYLD - Sanitizing & Detergent Commercial Cleaning Bucket- 3 Quart Cleaning Pail

BYLD - Sanitizing & Detergent Commercial Cleaning Bucket- 3 Quart Cleaning Pail

  • Manchaca, Texas, United States
  • Jul 14th
Lot of 40pcs. Hard Core Pins 3"

Lot of 40pcs. Hard Core Pins 3"

  • Longmont, Colorado, United States
  • Jul 11th
HUGE LOT Royal and other brand Perforators/Core Pin Blanks

HUGE LOT Royal and other brand Perforators/Core Pin Blanks

  • North Grosvenordale, Connecticut, United States
  • Jul 11th

People who viewed this item also vieved

blow mold

blow mold

  • Amarillo, Texas, United States
  • Jan 30th
Conair CONAIR MX2-D1 TWIN THERMOLATOR UNIT BRAND NEW

Conair CONAIR MX2-D1 TWIN THERMOLATOR UNIT BRAND NEW

  • Laredo, Texas, United States
  • Jan 30th
Sylvania Heating Element 650W 220/ 230V W/TC # 062924 New

Sylvania Heating Element 650W 220/ 230V W/TC # 062924 New

  • Corbin, Kentucky, United States
  • Jan 30th
Cincinnati Milacron 3-533-0033G Circuit Board

Cincinnati Milacron 3-533-0033G Circuit Board

  • Warren, Michigan, United States
  • Jan 30th
NEW WATLOW 810030A G4A44 HEATER CARTRIDGE ELEMENT 240V-AC 4-1/8 IN 400W D253655

NEW WATLOW 810030A G4A44 HEATER CARTRIDGE ELEMENT 240V-AC 4-1/8 IN 400W D253655

  • Delta, Ohio, United States
  • Jan 30th
SINGLE HEAD PRINTER MACHINE 3D NEW BRAND SOURCE RELIABLE OPEN PRINTING

SINGLE HEAD PRINTER MACHINE 3D NEW BRAND SOURCE RELIABLE OPEN PRINTING

  • Shanghai, China
  • Jan 30th
PRINTING HEAD SOURCE MACHINE NEW 3D OPEN BRAND SINGLE PRINTER RELIABLE

PRINTING HEAD SOURCE MACHINE NEW 3D OPEN BRAND SINGLE PRINTER RELIABLE

  • Shanghai, China
  • Jan 30th
ADAFRUIT INDUSTRIES 906 SKILL BADGE, IRON-ON PATCH, RASPBERRY PI (1 piece)

ADAFRUIT INDUSTRIES 906 SKILL BADGE, IRON-ON PATCH, RASPBERRY PI (1 piece)

  • Potomac, Maryland, United States
  • Jan 30th
Over 200 Small Electric Porcelain Wire Caps. WAMCO "They Stand the Heat"

Over 200 Small Electric Porcelain Wire Caps. WAMCO "They Stand the Heat"

  • Buford, Georgia, United States
  • Jan 30th
Cube X Trio 3D Printer Excess Inventory Black Friday Sale

Cube X Trio 3D Printer Excess Inventory Black Friday Sale

  • New York, New York, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies